Ryan Malloy
a7f62e5d7e
- Library source from AN721SW (cp210xmanufacturing_1.0.tar.gz) - Manufacturing tool source (cp210xsmt) - Builds 64-bit shared library with: make LIB_ARCH=64 - Datasheets and app notes in docs/
35 lines
1.7 KiB
Plaintext
35 lines
1.7 KiB
Plaintext
# This is a udev rules file for all USB devices with a Silicon Labs Vendor ID
|
|
# of 0x10c4.
|
|
#
|
|
# This file is based on the sample udev file from HIDAPI (using libusb-1.0).
|
|
#
|
|
# NOTE: This udev file will grant read and write access to ALL users,
|
|
# include non-privileged users, for ALL USB devices that have a matching
|
|
# Vendor ID according to the rules below. If this is not desirable and you
|
|
# would like to put more restrictions on access to these devices, then read
|
|
# http://reactivated.net/writing_udev_rules.html for more information.
|
|
|
|
# This is a sample udev file for HIDAPI devices which changes the permissions
|
|
# to 0666 (world readable/writable) for a specified device on Linux systems.
|
|
|
|
# If you are using the libusb implementation of hidapi (hid-libusb.c), then
|
|
# use something like the following line, substituting the VID and PID with
|
|
# those of your device. Note that for kernels before 2.6.24, you will need
|
|
# to substitute "usb" with "usb_device". It shouldn't hurt to use two lines
|
|
# (one each way) for compatibility with older systems.
|
|
|
|
# HIDAPI/libusb
|
|
SUBSYSTEM=="usb", ATTRS{idVendor}=="10c4", MODE="0666"
|
|
SUBSYSTEM=="usb_device", ATTRS{idVendor}=="10c4", MODE="0666"
|
|
|
|
# Once done, optionally rename this file for your device, and drop it into
|
|
# /etc/udev/rules.d and unplug and re-plug your device. This is all that is
|
|
# necessary to see the new permissions. Udev does not have to be restarted.
|
|
|
|
# If you think permissions of 0666 are too loose, then see:
|
|
# http://reactivated.net/writing_udev_rules.html for more information on finer
|
|
# grained permission setting. For example, it might be sufficient to just
|
|
# set the group or user owner for specific devices (for example the plugdev
|
|
# group on some systems).
|
|
|