Moved aditional components from dicts to a new dataclass
Update dict get refrences to class members
Simplify Connector and Cable bom generation (deduplication is now
handled with the additional components)
Other small sugested cleanups
This image, with an optional caption below, is displayed in the lower
section of the connector/cable node in the diagram - just above the
notes if present.
This solves the basic part of issue #27, and is a continuation of
PR #137 that was closed due to changes in the base branch.
- Shorten `part_number` to `pn`
- Shorten `manufacturer_part_number` to `mpn`
- Show `manufacturer` and `mpn` in a single cell of the node
- Replace `manufacturer` with `'MPN'`within the node if no manufacturer is specified.
- Rearrange order of P/N fields within node
`{pn} | {manufacturer}: {mpn}`
Closes#67.
- Allow defining arbitrarily long lists of alternating connectors and cables in a connection set.
- Start work towards removing 'ferrules' as special case, merging them with normal connectors
- Stramline auto-generation of simple, one pin connectors (ferrules, wire splices, ...)
* Fix AWG<-> mm2 conversions
Add an inverted dictionary and a lookup function from awg -> mm2. Also
do some minor refactoring. Both sides of the conversion table were
converted to strings, since '0000' and '2/0' are perfectly valid AWG
values.
* Update example ex02 with awg -> mm2 conversion
Show conversions for ex02, and make sure it displays conversions in both
directions. Rebuild the example files.
* Fix faulty conversion of non-(mm2,AWG) units
The parsing allows arbitrary units to be used for cable dimensions --
this might be valid units, e.g. square inches, or invalid, e.g. bananas.
We only allow conversion between mm2 and AWG, so check that the
gauge_unit is either of those before conversion. If not, pass through as
is.
* Fix AWG string casing in output
Convert e.g. 'awg, 'AwG' to upper case for consistent rendering. Leave
any other input gauge units as they were.
Co-authored-by: Daniel Rojas <github@danielrojas.net>
* Format all files using autopep8 to add basic PEP8 conformity.
* Add Exception types to bare excepts to prevent catching `ctrl+c`
* Remove some unnecessary assignment to dummy variables before returning
* Add `Optional` to type hints that can be `NoneType`
* Change a number of single-letter variables to more descriptive names
* Replace string.format() use with Python's f-strings, as they tends to be cleaner, and provide a performance boost.
* One multiline string was left as string.format() as I do not believe f-strings support multiline
* Some of the string.format() instances had unused/ignored arguments. I left them out of the f-strings, but I marked those cases with a comments that begins `# FIXME:`
* Rename variables that were shadowding python standard functions (specifically `format->fmt`, `input->inp`, `type->maintype`)
* Some instances of `type` were not changed, as it breaks the yaml parsing. Needs to be looked into.
* Move classes in `wireviz.py` to two new files `DataClasses.py` and `Harness.py`.
Co-authored-by: Daniel Rojas <github@danielrojas.net>
