Add CLAUDE.md with deployment instructions

CLAUDE.md

@@ -0,0 +1,200 @@
+# CLAUDE.md
+
+This file provides guidance to Claude Code when working with gr-apollo.
+
+## Project Overview
+
+GNU Radio 3.10+ out-of-tree (OOT) module for decoding **Apollo Unified S-Band (USB)** telecommunications signals. Based on the 1965 NAA Telecommunication Systems Study Guide (Course A-624) and Virtual AGC project.
+
+**Target signals:**
+- Downlink: 2287.5 MHz (spacecraft → ground)
+- Uplink: 2106.40625 MHz (ground → spacecraft)
+- Coherent ratio: 240/221 (Tx = Rx × 240/221)
+
+## Repository Structure
+
+```
+gr-apollo/
+├── src/apollo/              # GNU Radio Python blocks (src-layout)
+│   ├── pm_demod.py              # PM demodulator (0.133 rad peak)
+│   ├── bpsk_subcarrier_demod.py # 1.024 MHz BPSK subcarrier
+│   ├── pcm_frame_sync.py        # 32-bit sync, 128-word frames
+│   ├── pcm_demux.py             # Frame demultiplexer
+│   └── voice_subcarrier_demod.py # 1.25 MHz FM voice
+├── grc/                     # GRC block YAML definitions
+├── docs/                    # Reference documentation
+├── examples/                # Example flowgraphs
+├── pyproject.toml           # Python package configuration
+└── README.md
+```
+
+## Development Commands
+
+```bash
+# Install in development mode
+uv pip install -e .
+
+# Install GRC block definitions
+cp grc/*.yml ~/.local/share/gnuradio/grc/blocks/
+
+# Test with gr-mcp (if available)
+# Use protocol analysis tools to generate decoder chain
+```
+
+## Signal Architecture
+
+### Downlink Signal Chain (2287.5 MHz)
+
+```
+RF Input → Carrier PLL → PM Demod → Subcarrier Separation
+                                            │
+                    ┌───────────────────────┼───────────────────────┐
+                    ↓                       ↓                       ↓
+            1.024 MHz BPSK           1.25 MHz FM              Ranging
+            (PCM telemetry)          (Voice)                  (PRN code)
+                    ↓                       ↓
+            Symbol Sync              FM Discriminator
+                    ↓                       ↓
+            51.2 kbps NRZ            300-3000 Hz audio
+                    ↓
+            Frame Sync (32-bit)
+                    ↓
+            128-word demux
+```
+
+### Key Parameters
+
+| Parameter | Value | Notes |
+|-----------|-------|-------|
+| Downlink frequency | 2287.5 MHz | Coherent with uplink |
+| PM peak deviation | 0.133 rad (7.6°) | Phase modulation |
+| PCM subcarrier | 1.024 MHz | BPSK modulated |
+| PCM bit rate | 51.2 kbps (high) / 1.6 kbps (low) | NRZ, MSB first |
+| Voice subcarrier | 1.25 MHz | FM, ±29 kHz deviation |
+| Frame length | 128 words × 8 bits | 50 fps high rate |
+| Frame sync | 32-bit pattern | Complements on odd frames |
+| Master clock | 512 kHz | All timing derived from this |
+
+### PCM Frame Structure
+
+```
+┌─────────────────────────────────────────────────────────────┐
+│  Frame Sync (32 bits = 4 words)                             │
+│  [5-bit A][15-bit core][6-bit B][6-bit frame ID]           │
+├─────────────────────────────────────────────────────────────┤
+│  Data Words 5-128 (124 words)                               │
+│  - High-level analog (0-5V, 8-bit)                          │
+│  - Low-level analog (0-40mV, 8-bit with ×125 gain)         │
+│  - Digital parallel/serial inputs                           │
+│  - AGC downlink data (channels 34, 35, 57)                  │
+└─────────────────────────────────────────────────────────────┘
+
+50 frames = 1 subframe (1 second at high rate)
+```
+
+### Subcarrier Oscillators (FM Mode)
+
+| SCO | Center Freq | Deviation | Use |
+|-----|-------------|-----------|-----|
+| 1 | 14,500 Hz | ±7.5% | Analog sensor |
+| 2 | 22,000 Hz | ±7.5% | Analog sensor |
+| 3 | 30,000 Hz | ±7.5% | Analog sensor |
+| 4 | 40,000 Hz | ±7.5% | Analog sensor |
+| 5 | 52,500 Hz | ±7.5% | Analog sensor |
+| 6 | 70,000 Hz | ±7.5% | Analog sensor |
+| 7 | 95,000 Hz | ±7.5% | Analog sensor |
+| 8 | 125,000 Hz | ±7.5% | Analog sensor |
+| 9 | 165,000 Hz | ±7.5% | Analog sensor |
+
+## GNU Radio Blocks to Implement
+
+### Phase 1: Core Demodulation
+| Block | Type | I/O | Description |
+|-------|------|-----|-------------|
+| `pm_demod` | `gr.sync_block` | complex→float | PM demodulator with carrier recovery |
+| `subcarrier_extract` | `gr.sync_block` | float→complex | Bandpass + downconvert subcarrier |
+| `bpsk_demod` | `gr.sync_block` | complex→byte | BPSK demodulation with symbol sync |
+
+### Phase 2: PCM Processing
+| Block | Type | I/O | Description |
+|-------|------|-----|-------------|
+| `pcm_frame_sync` | `gr.basic_block` | byte→PDU | 32-bit sync detection, frame extraction |
+| `pcm_demux` | `gr.basic_block` | PDU→PDU | Demultiplex 128-word frames by word position |
+| `downlink_decoder` | `gr.basic_block` | PDU→dict | Interpret AGC telemetry lists |
+
+### Phase 3: Voice & Analog
+| Block | Type | I/O | Description |
+|-------|------|-----|-------------|
+| `fm_voice_demod` | `gr.sync_block` | complex→float | 1.25 MHz FM subcarrier → audio |
+| `sco_demod` | `gr.sync_block` | float→float | FM SCO demodulator (configurable) |
+
+## Virtual AGC Integration
+
+The Virtual AGC emulator communicates via TCP socket (port 19697+):
+
+```
+4-byte packet format:
+Byte 0: [Channel bits 8-4][0x00]
+Byte 1: [0x40 | Channel bits 3-1][Value bits 14-12]
+Byte 2: [0x80 | Value bits 11-6]
+Byte 3: [0xC0 | Value bits 5-0]
+```
+
+Key telecom channels:
+- **Ch 45 (INLINK)**: Uplink data input
+- **Ch 57 (OUTLINK)**: Downlink data output
+- **Ch 34/35 (DNTM1/2)**: Telemetry word stream
+
+## References
+
+- [Implementation Spec](../virtualagc/telecom_study_guide/IMPLEMENTATION_SPEC.md)
+- [Virtual AGC Project](https://www.ibiblio.org/apollo/)
+- [NASA Apollo USB Description](https://ntrs.nasa.gov/)
+- [NAA Course A-624 Study Guide](https://archive.org/details/apollo-telecommunications)
+
+## Code Style
+
+- Python: Follow GNU Radio block patterns (numpy for DSP)
+- Use gr-mcp protocol analysis tools for decoder chain generation
+- Test blocks in Docker before integration
+
+## Docs Site Deployment
+
+Starlight documentation site in `docs/` subdirectory.
+
+- **Production**: https://gr-apollo.warehack.ing
+- **Local dev**: Set `DOMAIN=gr-apollo.l.warehack.ing` in `docs/.env`
+- **Git**: `git@git.supported.systems:warehack.ing/gr-apollo.git`
+- **Server**: `ssh -A warehack-ing@warehack.ing`, repo at `~/gr-apollo`
+
+### Environment
+
+Copy `.env.example` to `.env` and set:
+
+```env
+COMPOSE_PROJECT=gr-apollo-docs
+DOMAIN=gr-apollo.warehack.ing
+```
+
+### Commands
+
+```bash
+# From docs/ directory:
+make up        # Production — Caddy serves static dist/
+make dev       # Development — Astro dev server with HMR
+make down      # Stop all containers
+make logs      # Tail container logs
+```
+
+### Deploy to Production
+
+```bash
+# One-liner from local machine
+ssh -A warehack-ing@warehack.ing "cd ~/gr-apollo && git pull && cd docs && make up"
+```
+
+### Notes
+
+- Uses Docker Compose profiles (`prod` / `dev`)
+- Playwright + Chromium installed in build stage for mermaid diagram rendering
+- caddy-docker-proxy on external `caddy` network handles TLS automatically