Keepout exits and rule areas

A route may not leave a cell inside a wire keepout as a wire, nor reach
a pin there by one: it changes layer instead, and the via goes in the
pad. A pin whose every stub enters a keepout is reached by a via only.

A structure keepout named rule_area... (mckicad names KiCad rule areas
so) is checked for overlap only, as KiCad's DRC does, with the free ends
of each wire tested for their round caps.

src/freeroute/route/exact_router.py

@@ -42,6 +42,7 @@ from freeroute.geometry import (
     segment_octagon,
     shove_segment,
 )
+from freeroute.geometry.polyline import corner_box
 
 from .grid_router import RouteResult, route_board
 
@@ -157,7 +158,10 @@ def route_board_exact(
             box = tile.bounding_box()
             if not box.is_empty():
                 tree.insert(
-                    TreeShape(next(owner), -1, frozenset({obstacle.layer}), box, blocks=blocks)
+                    TreeShape(
+                        next(owner), -1, frozenset({obstacle.layer}), box,
+                        blocks=blocks, clearance=obstacle.clearance,
+                    )
                 )
 
     via_layers = frozenset(signal_layers)
@@ -178,7 +182,9 @@ def route_board_exact(
             )
             for i, (box, box_layers) in enumerate(boxes)
             for layer in box_layers
-        ) or (outline is not None and not all(outline.box_clear(b, edge) for b, _ in boxes)):
+        ) or _end_in_rule_area(tree, wires, half_width) or (
+            outline is not None and not all(outline.box_clear(b, edge) for b, _ in boxes)
+        ):
             rejected.append((net_no, *ends))
             continue  # exact-clearance conflict -> drop (may be recovered by shove)
         acc = accepted.get(net_no)
@@ -592,6 +598,17 @@ def _net_boxes(result, net_no, half_width, via_layers, via_half=None):
     )
 
 
+def _end_in_rule_area(tree, wires, half_width) -> bool:
+    """A wire's tiles stop at its end points, but a track ends in a round cap
+    half its width beyond them. Against other copper the pad or via there
+    covers it; a rule area has no clearance to absorb it, so check it."""
+    for layer, points in wires:
+        for end in (points[0], points[-1]):
+            if tree.rule_area_overlap(corner_box(end, half_width), layer):
+                return True
+    return False
+
+
 def _copper_boxes(wires, vias, half_width, via_layers, via_half=None):
     via_half = via_half or half_width
     boxes: list[tuple[IntBox, frozenset[int]]] = []