Keep hole-to-hole spacing between every two vias, one net's included

Every pin of a supply drops its own via to the plane, and nothing kept
two of them apart: the flight controller came back with 199 co-located
holes and 109 hole-to-hole errors, nearly all VDD_3V3 and GND. A via now
keeps its drill plus --hole-to-hole (default 0.25 mm, KiCad's) from
every via centre, fixed ones included, except an own-net via at the same
cell, which it reuses; such a via is written once, and none is written
on top of a via already on the board.

src/freeroute/route/exact_router.py

@@ -100,6 +100,8 @@ def route_board_exact(
     access_cost: float = 0.0,
     rollback: bool = True,
     net_widths: dict[int, int] | None = None,
+    via_drill: int | None = None,
+    hole_to_hole: int = 0,
 ) -> ExactRouteResult:
     """Route ``board`` orthogonally and verify the result with exact geometry.
 
@@ -133,6 +135,8 @@ def route_board_exact(
         access_cost=access_cost,
         rollback=rollback,
         net_widths=net_widths,
+        via_drill=via_drill,
+        hole_to_hole=hole_to_hole,
     )
     edge = 0 if edge_clearance is None else edge_clearance
     outline = board.outline