Rename to rpmroute

The router began as a port of FreeRouting and has grown its own engine
(negotiated congestion, tree nets, exact checks, axis escapes), and
'freeroute' was one letter from the project it no longer follows. The
package, module and command are now rpmroute; the freeroute command stays
as an alias, and the RPMROUTE / RPMROUTE_ORACLE_JAVA variables fall back
to the old FREEROUTE names. Version 2026.10.07. Routing is unchanged: a
PCBench board routes to a byte-identical session either way.

tests/route/test_real_board_geometry.py

@@ -6,9 +6,9 @@ import math
 
 import pytest
 
-from freeroute.board import build_board
-from freeroute.dsn import parse_dsn
-from freeroute.route.pipeline import route_dsn_board_exact
+from rpmroute.board import build_board
+from rpmroute.dsn import parse_dsn
+from rpmroute.route.pipeline import route_dsn_board_exact
 
 # 20 x 20 mm board whose corners are rounded with a 3 mm radius, as polylines
 _R = 3000.0
@@ -70,7 +70,7 @@ def test_every_pin_of_a_half_millimetre_pitch_row_escapes(resolution):
 
 
 def test_resolution_one_has_no_halo_so_the_grid_is_unchanged():
-    from freeroute.route.grid_router import GridRouter
+    from rpmroute.route.grid_router import GridRouter
 
     board = build_board(parse_dsn(_dsn("", "")))
     assert GridRouter(board, trace_width=2500, clearance=1500)._halo_offsets == []
@@ -101,7 +101,7 @@ def test_heuristic_weight_bounds_route_length():
 
 # --- copper zones (DSN planes) -----------------------------------------------
 # rc4 power stage: pads inside "keep router off" pours connect through the pour,
-# and freeroute, not knowing zones, dropped every such connection.
+# and rpmroute, not knowing zones, dropped every such connection.
 
 _ZONE = "(plane N (polygon F.Cu 0  4000 -4000  10000 -4000  10000 -10000  4000 -10000  4000 -4000))"
 _NO_TRACKS = "(wire_keepout \"pour\" (polygon F.Cu 0  4000 -4000  10000 -4000  10000 -10000  4000 -10000))"
@@ -121,7 +121,7 @@ def test_planes_are_read_and_are_not_obstacles():
 
 
 def test_pads_in_one_zone_need_no_route_between_them():
-    from freeroute.route.grid_router import _connected_groups
+    from rpmroute.route.grid_router import _connected_groups
 
     board = build_board(_zone_board())
     pins = sorted(board.get_pins(), key=lambda p: p.component_ref)
@@ -155,7 +155,7 @@ def test_a_pour_other_nets_can_cross_is_not_trusted_to_connect():
 
 def test_cli_names_the_connections_it_could_not_route(tmp_path, capsys):
     # a keepout wall across the board on both layers: A and B cannot be joined
-    from freeroute.cli import main
+    from rpmroute.cli import main
 
     wall = " ".join(
         f"(keepout \"wall\" (polygon {layer} 0  9000 1000  11000 1000  11000 -21000  9000 -21000))"
@@ -218,7 +218,7 @@ def test_a_pad_outside_the_plane_routes_to_it():
 
 
 def test_a_through_hole_pad_inside_a_plane_needs_no_route():
-    from freeroute.route.grid_router import _connected_groups
+    from rpmroute.route.grid_router import _connected_groups
 
     board = build_board(parse_dsn(_four_layer_dsn()))
     plane = [z for z in board.get_conduction_areas() if z.name == "GND"]