Route with the exact engine by default; warn when an engine does not check

The grid engine was the default and its copper is not checked against exact
shapes: a full reroute of the Labrador lid with no flags came out with 15
tracks_crossing and 87 clearance violations under KiCad's DRC while the
report listed only unrouted connections. The exact engine (what mckicad and
every benchmark already use) is now the default, and grid or room runs end
with a warning that their output needs a DRC.

CLAUDE.md

@@ -1,12 +1,12 @@
 # CLAUDE.md
 
-Guidance for Claude Code working in the `freeroute` repository.
+Guidance for Claude Code working in the `rpmroute` repository.
 
 ## What this is
 
 A native Python PCB autorouter: a Java-free reimplementation of the
 [FreeRouting](https://github.com/freerouting/freerouting) engine. Specctra DSN
-in, Specctra SES out, no JVM anywhere. Published on PyPI as `freeroute`
+in, Specctra SES out, no JVM anywhere. Published on PyPI as `rpmroute`
 (GPL-3.0-or-later, CalVer).
 
 ## Commands
@@ -16,7 +16,7 @@ uv sync
 uv run pytest -m "not oracle"        # the fast suite (this is what you run)
 uv run pytest -m oracle              # differential tests against the real JAR (needs Java)
 uv run ruff check src/ tests/
-uv run freeroute board.dsn --engine room --pack -do board.ses
+uv run rpmroute board.dsn --engine room --pack -do board.ses
 ```
 
 ## The three non-negotiable invariants
@@ -67,7 +67,7 @@ route/     grid_router | exact_router | room_router, shove, pipeline, cli
   decomposed into convex rooms joined by doors, so it routes off-grid channels
   the grid literally cannot see. DRC-clean. Supports `--pack` and `--shove`.
 
-The engine/option matrix lives in `freeroute.cli.ENGINE_OPTIONS` and is
+The engine/option matrix lives in `rpmroute.cli.ENGINE_OPTIONS` and is
 importable, so consumers can assert against it. **An unsupported combination is
 a hard error (exit 2), never a silent no-op.** Downstream code (`mckicad`) reads
 this matrix to avoid sending an invalid pair.

README.md

@@ -1,14 +1,23 @@
-# freeroute
+# rpmroute
 
-A native Python PCB autorouter: a Java-free reimplementation of the
-[FreeRouting](https://github.com/freerouting/freerouting) engine. Specctra DSN
-in, Specctra SES out, no JVM anywhere in the pipeline.
+A native Python PCB autorouter. Specctra DSN in, Specctra SES out, no JVM
+anywhere in the pipeline.
+
+It began as a Java-free port of the
+[FreeRouting](https://github.com/freerouting/freerouting) engine and has grown
+its own router since: negotiated congestion before routing, multi-pin nets
+routed as trees, every route checked against exact pad and copper shapes, and
+pin escapes along the pad's own axis for parts placed at an angle. On dense
+boards it now finishes more connections than the FreeRouting JAR, with no
+rule violations.
+
+It was called `freeroute` until 2026-10-07; that command still works.
 
 ## Why
 
 Toolchains that autoroute (`kicad-mcp` among them) do it by shelling out to
 `freerouting.jar`, which drags a JVM into every install and container image.
-`freeroute` reimplements the routing engine in pure Python, with no dependencies
+`rpmroute` reimplements the routing engine in pure Python, with no dependencies
 beyond the standard library, so the JAR step becomes a `pip install`.
 
 ## The contract
@@ -16,31 +25,31 @@ beyond the standard library, so the JAR step becomes a `pip install`.
 The entire integration surface is two Specctra files:
 
 ```
-board.dsn  ──▶  freeroute  ──▶  board.ses
+board.dsn  ──▶  rpmroute  ──▶  board.ses
 (unrouted)                       (routed session: traces + vias)
 ```
 
-`kicad-cli` already exports `.dsn` and imports `.ses`, so `freeroute` drops in
+`kicad-cli` already exports `.dsn` and imports `.ses`, so `rpmroute` drops in
 wherever `java -jar freerouting.jar` was invoked, and nothing else in the pipeline
 changes. The `-de` / `-do` / `-mp` flags are the JAR's, on purpose.
 
 ## Install
 
 ```bash
-uv tool install freeroute      # or: pipx install freeroute
+uv tool install rpmroute      # or: pipx install rpmroute
 ```
 
 ## Usage
 
 ```bash
 # a KiCad board: the exact engine, with the board's copper-to-edge rule
-freeroute board.dsn --engine exact --shove --edge-clearance 0.5 -do board.ses
+rpmroute board.dsn --engine exact --shove --edge-clearance 0.5 -do board.ses
 
-freeroute -de board.dsn -do board.ses     # the FreeRouting JAR spelling (grid engine)
-freeroute board.dsn --engine room --pack --shove -do board.ses
+rpmroute -de board.dsn -do board.ses     # the FreeRouting JAR spelling (grid engine)
+rpmroute board.dsn --engine room --pack --shove -do board.ses
 ```
 
-With no `-do` / `-o`, the SES goes to stdout. Connections freeroute could not
+With no `-do` / `-o`, the SES goes to stdout. Connections rpmroute could not
 make are listed on stderr; the SES is still written and the exit code stays 0,
 as with the JAR. Connections whose two ends sit in one zone of their net are
 listed separately, as left to that zone's fill.
@@ -99,7 +108,7 @@ What the opt-in passes buy you:
 - **`--diagonal`** (exact): a still-dropped 2-pin net is retried as a 45° trace
   covered by an exact integer octagon.
 
-## What freeroute reads from a KiCad DSN
+## What rpmroute reads from a KiCad DSN
 
 These were each checked against KiCad itself, pad by pad or with its DRC:
 
@@ -125,7 +134,7 @@ SES coordinates are written in resolution units, exactly as the JAR writes them.
 ## Library use
 
 ```python
-from freeroute.route import route
+from rpmroute.route import route
 
 ses_text = route(dsn_text, engine="exact", shove=True, edge_clearance_mm=0.5)
 ```
@@ -136,13 +145,13 @@ Alpha. Measured on two real KiCad 10 boards (the TerraHawk charge node's power
 stage and sense board, 2026-09-27), with every track stripped, then routed, then
 checked with `kicad-cli pcb drc --refill-zones`:
 
-| board | freeroute exact | FreeRouting JAR | DRC errors from freeroute |
+| board | rpmroute exact | FreeRouting JAR | DRC errors from rpmroute |
 |---|---|---|---|
 | power stage (40 x 30 mm) | 7 unconnected, ~5 s | 12 | 0 |
 | sense board (55 x 25 mm, 0.5 mm pitch MCU) | 41 unconnected, ~2.5 min | 32 | 0 |
 
 In the board owner's production flow (hand-routed power lanes kept, pours added
-after routing), freeroute completed the power stage with no unconnected items.
+after routing), rpmroute completed the power stage with no unconnected items.
 
 What it is **not**, stated plainly:
 
@@ -164,7 +173,7 @@ What it is **not**, stated plainly:
 
 For maximum completion on a dense board today, the JAR is still the stronger
 router. For routing without a JVM (CI, containers, an MCP server, a library
-call), freeroute routes legally and says what it could not do.
+call), rpmroute routes legally and says what it could not do.
 
 ## Development
 

bench/bench.py

@@ -37,8 +37,8 @@ import tempfile
 import threading
 import time
 
-NOT_ROUTED = re.compile(r"freeroute: (\d+) connection\(s\) not routed")
-TO_ZONE = re.compile(r"freeroute: (\d+) more connection\(s\) left to a zone fill")
+NOT_ROUTED = re.compile(r"rpmroute: (\d+) connection\(s\) not routed")
+TO_ZONE = re.compile(r"rpmroute: (\d+) more connection\(s\) left to a zone fill")
 
 
 def parse_boards(path: Path) -> list[tuple[str, Path, list[str]]]:
@@ -61,8 +61,8 @@ def parse_variant(spec: str) -> tuple[str, str | None, list[str]]:
     if not sep or not head:
         raise SystemExit(f"variant {spec!r}: want NAME=FLAGS or NAME@SRC=FLAGS")
     name, _, src = head.partition("@")
-    if src and not (Path(src) / "freeroute").is_dir():
-        raise SystemExit(f"variant {name}: {src} has no freeroute package")
+    if src and not (Path(src) / "rpmroute").is_dir():
+        raise SystemExit(f"variant {name}: {src} has no rpmroute package")
     return name, src or None, shlex.split(flags)
 
 
@@ -74,7 +74,7 @@ def run_one(board, variant, seed: int, timeout: float) -> dict:
         env["PYTHONPATH"] = src + os.pathsep + env.get("PYTHONPATH", "")
     with tempfile.TemporaryDirectory() as tmp:
         cmd = [
-            sys.executable, "-m", "freeroute.cli", str(dsn), "-do", f"{tmp}/out.ses",
+            sys.executable, "-m", "rpmroute.cli", str(dsn), "-do", f"{tmp}/out.ses",
             *board_flags, *flags, "--seed", str(seed),
         ]
         start = time.monotonic()

bench/diagnose.py

@@ -23,14 +23,14 @@ import json
 from pathlib import Path
 import sys
 
-from freeroute.board import build_board
-from freeroute.board.search_tree import ShapeSearchTree
-from freeroute.dsn import parse_dsn
-from freeroute.geometry.octagon import overlaps_2d
-from freeroute.route import grid_router
-from freeroute.route.exact_router import route_board_exact
-from freeroute.route.grid_router import GridRouter, _ends_of
-from freeroute.route.pipeline import (
+from rpmroute.board import build_board
+from rpmroute.board.search_tree import ShapeSearchTree
+from rpmroute.dsn import parse_dsn
+from rpmroute.geometry.octagon import overlaps_2d
+from rpmroute.route import grid_router
+from rpmroute.route.exact_router import route_board_exact
+from rpmroute.route.grid_router import GridRouter, _ends_of
+from rpmroute.route.pipeline import (
     _mm_to_board,
     _net_widths_board,
     _rule_clearance_dsn,
@@ -215,6 +215,8 @@ def diagnose(
 
     # the board as the best pass left it
     state = _fresh(seen)
+    # pins on turned pads leave along their pad's axis: replay with the same exits
+    state._axis_exits = dict(routed._axis_exits)
     conns = state._conns
     for idx, (path, a_end, b_end) in best.items():
         conns[idx].a_end, conns[idx].b_end = a_end, b_end

bench/drc_check.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
-# Route one KiCad board with freeroute and judge the result with KiCad's DRC.
+# Route one KiCad board with rpmroute and judge the result with KiCad's DRC.
 #
-#   bench/drc_check.sh [--keep] <board.kicad_pcb> <out-dir> [freeroute args...]
+#   bench/drc_check.sh [--keep] <board.kicad_pcb> <out-dir> [rpmroute args...]
 #
 # Copies the board (and its .kicad_pro) into <out-dir>, strips its tracks and
 # vias unless --keep is given (then they reach the router as fixed wiring),
@@ -10,14 +10,14 @@
 # shorts, opens, hole problems (whatever severity the board gives them) and
 # the other errors. The source board is never touched.
 #
-# FREEROUTE (default: this checkout's .venv/bin/freeroute) and MCK (default
+# RPMROUTE (or the older FREEROUTE; default: this checkout's .venv/bin/rpmroute) and MCK (default
 # ~/claude/mckicad) pick the builds to judge.
 set -euo pipefail
 keep=0
 if [[ "${1:-}" == "--keep" ]]; then keep=1; shift; fi
 src="$1"; out="$2"; shift 2
 here="$(cd "$(dirname "$0")/.." && pwd)"
-FREEROUTE="${FREEROUTE:-$here/.venv/bin/freeroute}"
+RPMROUTE="${RPMROUTE:-${FREEROUTE:-$here/.venv/bin/rpmroute}}"
 MCK="${MCK:-$HOME/claude/mckicad}"
 rm -rf "$out"; mkdir -p "$out"
 cp "${src%.kicad_pcb}.kicad_pro" "$out/board.kicad_pro" 2>/dev/null || true
@@ -43,7 +43,7 @@ assert FreeRoutingEngine().export_dsn_from_kicad('$out/board.kicad_pcb', '$out/b
     >/dev/null 2>&1 || { echo "$out: DSN export failed"; exit 1; }
 
 start=$(date +%s.%N)
-"$FREEROUTE" "$out/board.dsn" -do "$out/board.ses" "$@" >"$out/route.log" 2>&1 || true
+"$RPMROUTE" "$out/board.dsn" -do "$out/board.ses" "$@" >"$out/route.log" 2>&1 || true
 secs=$(python3 -c "print(round($(date +%s.%N)-$start,1))")
 [[ -s "$out/board.ses" ]] || { echo "$out: no session ($(tail -1 "$out/route.log"))"; exit 1; }
 

docs/ARCHITECTURE.md

@@ -90,7 +90,7 @@ this is the structure the Python `reader.py` mirrors):
 
 **Python port status:** items 1 (tokenizer), the shape grammar, and every
 structure/library/network/placement/parser/resolution scope above are
-implemented in `src/freeroute/dsn/` this session (see below).
+implemented in `src/rpmroute/dsn/` this session (see below).
 
 ## 2. Board data model — `board/`
 
@@ -175,7 +175,7 @@ converge toward FreeRouting's free-space rooms. Not started this session.
   into the read result).
 
 ## Port order (this file drives the roadmap)
-1. **DSN parser** — done this session (`src/freeroute/dsn/`).
+1. **DSN parser** — done this session (`src/rpmroute/dsn/`).
 2. **SES writer** — next. Start with an empty/no-op session to prove the loop
    end-to-end through `kicad-cli pcb import specctra-ses`. See `SesWriter.java`
    and `SpecctraSesFileWriter.java`: `(session <name> (base_design <name>)
@@ -184,6 +184,6 @@ converge toward FreeRouting's free-space rooms. Not started this session.
 3. **Geometry primitives** — `geometry/planar` subset needed by the board model.
 4. **Board model** — `board` items + spatial index.
 5. **Autorouter** — maze/rip-up core, then optimize pass.
-6. **CLI + kicad-mcp integration** — `freeroute board.dsn -o board.ses`.
+6. **CLI + kicad-mcp integration** — `rpmroute board.dsn -o board.ses`.
 </content>
 </invoke>

docs/PORTING_PLAN.md

@@ -43,7 +43,7 @@ the output. Match that I/O and the rest of `kicad-mcp` is unchanged.
 4. **Autorouter core** — maze routing with rip-up-and-retry. Start grid-based
    Manhattan/45° for an MVP; converge toward FreeRouting's approach. _(TBD.)_
 5. **Optimize pass** — via minimization, trace smoothing. _(TBD.)_
-6. **CLI + kicad-mcp integration** — `freeroute board.dsn -o board.ses`, then
+6. **CLI + kicad-mcp integration** — `rpmroute board.dsn -o board.ses`, then
    swap it in behind `kicad_mcp/utils/freerouting_engine.py`'s JAR step.
 
 ## Validation strategy

pyproject.toml

@@ -3,9 +3,9 @@ requires = ["hatchling"]
 build-backend = "hatchling.build"
 
 [project]
-name = "freeroute"
-version = "2026.07.14"
-description = "Native Python PCB autorouter — a Java-free port of the FreeRouting engine (Specctra DSN in, SES out)"
+name = "rpmroute"
+version = "2026.10.07"
+description = "Native Python PCB autorouter with negotiated congestion and tree routing (Specctra DSN in, SES out)"
 readme = "README.md"
 license = "GPL-3.0-or-later"
 license-files = ["LICENSE"]
@@ -40,14 +40,17 @@ requires-python = ">=3.10"
 dependencies = []
 
 [project.urls]
-"Homepage" = "https://git.supported.systems/warehack.ing/freeroute"
-"Repository" = "https://git.supported.systems/warehack.ing/freeroute"
-"Issues" = "https://git.supported.systems/warehack.ing/freeroute/issues"
-# The Java engine this is a port of; freeroute ships no upstream code.
-"Upstream" = "https://github.com/freerouting/freerouting"
+"Homepage" = "https://git.supported.systems/warehack.ing/rpmroute"
+"Repository" = "https://git.supported.systems/warehack.ing/rpmroute"
+"Issues" = "https://git.supported.systems/warehack.ing/rpmroute/issues"
+# Where it started: a port of the Java FreeRouting engine. It has since grown
+# its own router (negotiation, tree nets, exact checks) and ships no upstream code.
+"Origin" = "https://github.com/freerouting/freerouting"
 
 [project.scripts]
-freeroute = "freeroute.cli:main"
+rpmroute = "rpmroute.cli:main"
+# the name it had until 2026-10-07, kept so existing scripts keep working
+freeroute = "rpmroute.cli:main"
 
 [dependency-groups]
 dev = [
@@ -57,7 +60,7 @@ dev = [
 ]
 
 [tool.hatch.build.targets.wheel]
-packages = ["src/freeroute"]
+packages = ["src/rpmroute"]
 
 [tool.hatch.build.targets.sdist]
 # Ship the package, the licence, and the docs — nothing else. `reference/` is a
@@ -95,7 +98,7 @@ select = ["E", "W", "F", "I", "B", "C4", "UP", "SIM"]
 ignore = ["E501"]
 
 [tool.ruff.lint.isort]
-known-first-party = ["freeroute"]
+known-first-party = ["rpmroute"]
 force-sort-within-sections = true
 
 [tool.pytest.ini_options]

src/freeroute/__init__.py

@@ -1,3 +0,0 @@
-"""freeroute — native Python PCB autorouter (Java-free FreeRouting port)."""
-
-__version__ = "0.1.0"

src/rpmroute/__init__.py

@@ -0,0 +1,3 @@
+"""rpmroute — native Python PCB autorouter (Java-free FreeRouting port)."""
+
+__version__ = "0.1.0"

src/rpmroute/board/__init__.py

@@ -1,9 +1,9 @@
-"""Board data model for freeroute.
+"""Board data model for rpmroute.
 
 The data model a parsed DSN produces and the (future) router operates on:
 layers, units, coordinate transform, nets, clearance matrix, the item hierarchy,
 and the :class:`BasicBoard` container. :func:`build_board` constructs a board
-from a :class:`~freeroute.dsn.model.DsnBoard`.
+from a :class:`~rpmroute.dsn.model.DsnBoard`.
 
 The routing operations (``RoutingBoard``) and the spatial ``ShapeSearchTree``
 belong to the router phase.

src/rpmroute/board/board.py

@@ -9,7 +9,7 @@ board-model invariants check.
 
 from __future__ import annotations
 
-from freeroute.geometry import IntBox
+from rpmroute.geometry import IntBox
 
 from .clearance import ClearanceMatrix
 from .items import ConductionArea, Item, ObstacleArea, Pin, Trace, Via
@@ -74,7 +74,7 @@ class BasicBoard:
         """Copper already routed on the board (the DSN's ``wiring``), as
         ``(net, layers, box)``. A track is its segments, its corners and the
         round caps at its ends (as squares); a via is its largest pad."""
-        from freeroute.geometry.polyline import Polyline, PolylineShape, corner_box
+        from rpmroute.geometry.polyline import Polyline, PolylineShape, corner_box
 
         out: list[tuple[int, frozenset[int], IntBox]] = []
         for item in self._items:

src/rpmroute/board/build.py

@@ -1,6 +1,6 @@
 """Build a :class:`BasicBoard` from a parsed DSN :class:`DsnBoard`.
 
-This is the load-bearing integration between :mod:`freeroute.dsn` and the board
+This is the load-bearing integration between :mod:`rpmroute.dsn` and the board
 model. It mirrors what FreeRouting's ``Structure.create_board`` / ``Library`` /
 ``Component`` / ``Network`` readers do collectively, but on the already-parsed
 ``DsnBoard``:
@@ -26,10 +26,10 @@ from __future__ import annotations
 import math
 import re
 
-from freeroute.dsn.model import DsnBoard
-from freeroute.dsn.shapes import Circle, Path, Polygon, Rectangle, Shape
-from freeroute.geometry import FloatPoint, IntBox, IntPoint, IntVector, Simplex
-from freeroute.geometry.polygon_shape import PolygonShape
+from rpmroute.dsn.model import DsnBoard
+from rpmroute.dsn.shapes import Circle, Path, Polygon, Rectangle, Shape
+from rpmroute.geometry import FloatPoint, IntBox, IntPoint, IntVector, Simplex
+from rpmroute.geometry.polygon_shape import PolygonShape
 
 from .board import BasicBoard
 from .clearance import ClearanceMatrix

src/rpmroute/board/items.py

@@ -3,22 +3,22 @@
 Ports the *data model* of ``board/Item.java`` and its subclasses (``Pin``,
 ``ObstacleArea``/``ConductionArea``, ``Via``, ``PolylineTrace``). The routing
 and search-tree machinery in the Java classes is out of scope here — these hold
-the geometry and connectivity a :class:`~freeroute.board.board.BasicBoard`
+the geometry and connectivity a :class:`~rpmroute.board.board.BasicBoard`
 needs and that the DSN-import invariants check.
 
 Coordinates are board units (DSN units scaled by the resolution). Shapes are the
-exact convex tiles / boxes from :mod:`freeroute.geometry`.
+exact convex tiles / boxes from :mod:`rpmroute.geometry`.
 
 ``Trace``/``Via`` are only produced by routing (an imported unrouted board has
 none); they are lightweight here and the router phase fleshes out
-``Trace`` with a proper :class:`~freeroute.geometry.Polyline` shape.
+``Trace`` with a proper :class:`~rpmroute.geometry.Polyline` shape.
 """
 
 from __future__ import annotations
 
 from dataclasses import dataclass, field
 
-from freeroute.geometry import IntBox, IntPoint
+from rpmroute.geometry import IntBox, IntPoint
 
 __all__ = ["Item", "Pin", "ObstacleArea", "ConductionArea", "Via", "Trace"]
 
@@ -126,7 +126,7 @@ class Trace(Item):
     """A routed trace (router-produced).
 
     Held as its corner points plus a half-width; the router phase attaches the
-    full :class:`~freeroute.geometry.Polyline` swept shape.
+    full :class:`~rpmroute.geometry.Polyline` swept shape.
     """
 
     layer: int = 0

src/rpmroute/board/outline.py

@@ -9,7 +9,7 @@ from __future__ import annotations
 
 import math
 
-from freeroute.geometry import IntBox, IntPoint
+from rpmroute.geometry import IntBox, IntPoint
 
 
 class BoardOutline:

src/rpmroute/board/search_tree.py

@@ -2,7 +2,7 @@
 
 Ports the query role of ``board/ShapeSearchTree*.java``. It replaces the exact
 router's occupancy grid: instead of rasterizing shapes into cells, it indexes
-each item's convex tiles (:class:`~freeroute.geometry.IntBox`) and answers
+each item's convex tiles (:class:`~rpmroute.geometry.IntBox`) and answers
 overlap / region queries with a broad phase (a bounding-box spatial hash) and an
 **exact** narrow phase (exact ``IntBox`` intersection). Insert and remove keep
 the index in step as traces are added.
@@ -18,7 +18,7 @@ from __future__ import annotations
 
 from dataclasses import dataclass
 
-from freeroute.geometry import IntBox, Simplex, overlaps_2d, segment_octagon
+from rpmroute.geometry import IntBox, IntPoint, Simplex, overlaps_2d, segment_octagon, segment_slab
 
 __all__ = ["TreeShape", "ShapeSearchTree"]
 
@@ -34,7 +34,7 @@ class TreeShape:
 
     ``exact`` / ``seg`` are set only for a 45-degree (diagonal) trace tile: ``tile``
     is then the bounding box (broad-phase only), ``exact`` is the tight octagon
-    copper :class:`~freeroute.geometry.Simplex`, and ``seg`` is ``(a, b,
+    copper :class:`~rpmroute.geometry.Simplex`, and ``seg`` is ``(a, b,
     half_width)`` so the clearance region can be rebuilt exactly on demand. For
     every orthogonal tile both are ``None`` and all code paths are byte-identical
     to the box-only tree.
@@ -63,7 +63,9 @@ class TreeShape:
         segment swept by ``half_width + clearance`` (exact integer superset)."""
         if self.seg is None:
             return self.tile.offset(clearance)
-        a, b, half_width = self.seg
+        a, b, half_width = self.seg[-3:]
+        if self.seg[0] == "slab":  # a slanted pin exit, at any angle
+            return segment_slab(a, b, half_width + clearance)
         return segment_octagon(a, b, half_width + clearance)
 
 
@@ -151,6 +153,25 @@ class ShapeSearchTree:
                 return True
         return False
 
+    def segment_conflict(
+        self, a: IntPoint, b: IntPoint, half_width: int, net_no: int, layer: int,
+        clearance: int, kind: str = "wire",
+    ) -> bool:
+        """:meth:`clearance_conflict` for a slanted segment, checked on its
+        exact swept copper instead of its bounding box (which would reach the
+        neighbouring pads of a pin leaving along its turned pad's axis)."""
+        copper = segment_slab(a, b, half_width)
+        grown = segment_slab(a, b, half_width + clearance)
+        for shape in self.overlapping(grown.bounding_box()):
+            if shape.net_no == net_no or not shape.on_layer(layer):
+                continue
+            if shape.blocks != "all" and shape.blocks != kind + "s":
+                continue
+            other = shape.exact if shape.exact is not None else shape.tile
+            if overlaps_2d(copper if not shape.clearance else grown, other):
+                return True
+        return False
+
     def rule_area_overlap(self, box: IntBox, layer: int, kind: str = "wire") -> bool:
         """True if ``box`` overlaps a rule area on ``layer`` that stops ``kind``."""
         for shape in self.overlapping(box):

src/rpmroute/board/transform.py

@@ -8,7 +8,7 @@ resolution`` and zero offset (see ``Structure.create_board``).
 
 from __future__ import annotations
 
-from freeroute.geometry import FloatPoint, IntPoint
+from rpmroute.geometry import FloatPoint, IntPoint
 
 __all__ = ["CoordinateTransform"]
 

src/rpmroute/cli.py

@@ -1,8 +1,8 @@
-"""freeroute command-line interface: Specctra DSN in, routed SES out.
+"""rpmroute command-line interface: Specctra DSN in, routed SES out.
 
 Flag-compatible with the FreeRouting JAR (``-de`` / ``-do`` / ``-mp``) so it can
 be dropped in wherever ``java -jar freerouting.jar`` was invoked, plus the
-freeroute-specific engine selection (``--engine``) and its opt-in passes.
+rpmroute-specific engine selection (``--engine``) and its opt-in passes.
 
 Not every engine supports every pass. The matrix below is the single source of
 truth; an unsupported combination is an error, never a silent no-op::
@@ -18,20 +18,23 @@ from __future__ import annotations
 import argparse
 import sys
 
-from freeroute.dsn.reader import parse_dsn
-from freeroute.route.orders import best_of_orders, promote_failures
-from freeroute.route.pipeline import (
+from rpmroute.dsn.reader import parse_dsn
+from rpmroute.route.orders import best_of_orders, promote_failures
+from rpmroute.route.pipeline import (
     build_exact_routing_result,
     build_rooms_routing_result,
     build_routing_result,
 )
-from freeroute.ses import write_ses
+from rpmroute.ses import write_ses
 
 #: which optional flags each engine actually implements. Anything not listed for
 #: an engine is rejected by :func:`_validate` rather than quietly ignored.
 ENGINE_OPTIONS: dict[str, frozenset[str]] = {
-    "grid": frozenset({"rip_up", "max_passes", "seed", "orders", "promote", "access", "negotiate", "rollback"}),
-    "exact": frozenset({"shove", "diagonal", "rip_up", "max_passes", "seed", "orders", "promote", "access", "negotiate", "rollback"}),
+    "grid": frozenset({"rip_up", "max_passes", "seed", "orders", "promote", "access", "negotiate", "rollback", "tree"}),
+    "exact": frozenset({
+        "shove", "diagonal", "rip_up", "max_passes", "seed", "orders", "promote", "access",
+        "negotiate", "rollback", "tree", "window",
+    }),
     "room": frozenset({"shove", "pack"}),
 }
 
@@ -48,6 +51,8 @@ _FLAG_NAMES = {
     "access": "--access-cost",
     "negotiate": "--negotiate",
     "rollback": "--no-rollback",
+    "tree": "--no-tree",
+    "window": "--window-reroute",
 }
 
 
@@ -69,7 +74,7 @@ def _validate(parser: argparse.ArgumentParser, engine: str, requested: list[str]
 
 def build_parser() -> argparse.ArgumentParser:
     parser = argparse.ArgumentParser(
-        prog="freeroute",
+        prog="rpmroute",
         description="Native PCB autorouter — route a Specctra DSN and write an SES session file.",
     )
     parser.add_argument("dsn", nargs="?", help="input Specctra .dsn file")
@@ -89,11 +94,12 @@ def build_parser() -> argparse.ArgumentParser:
     parser.add_argument(
         "--engine",
         choices=sorted(ENGINE_OPTIONS),
-        default="grid",
+        default="exact",
         help=(
-            "routing track: grid (default; multi-layer rip-up maze, highest coverage), "
-            "exact (orthogonal, exact-geometry DRC-verified output), "
-            "room (continuous expansion rooms, routes off-grid channels)"
+            "routing track: exact (default; every route checked against exact pad and "
+            "copper shapes, DRC-clean output), grid (quick maze on the grid alone: its "
+            "copper is NOT clearance-checked and can short), room (continuous expansion "
+            "rooms, routes off-grid channels; not clearance-checked either)"
         ),
     )
     parser.add_argument(
@@ -184,6 +190,53 @@ def build_parser() -> argparse.ArgumentParser:
         "connections a rip-up displaces are rerouted at once and the rip-up is undone "
         "if fewer connections end up routed",
     )
+    parser.add_argument(
+        "--no-tree",
+        dest="tree_nets",
+        action="store_false",
+        help="grid and exact engines: join a multi-pin net's pins as a chain in pin "
+        "order, each connection ending on one chosen pin, as before. By default they are "
+        "paired by a minimum spanning tree and a connection may end on copper its net "
+        "has already routed",
+    )
+    parser.add_argument(
+        "--window-reroute",
+        type=int,
+        metavar="N",
+        help="exact engine: after routing, N rounds of window re-routes: around each "
+        "connection still unrouted, the nets routed wholly inside a window are ripped and "
+        "the window routed again on a finer grid, kept only if fewer connections are left "
+        "unrouted; each round doubles the window's margin (default 0: off)",
+    )
+    parser.add_argument(
+        "--window-resolution",
+        type=int,
+        default=4,
+        metavar="K",
+        help="the window re-route's grid resolution (default 4)",
+    )
+    parser.add_argument(
+        "--window-budget",
+        type=float,
+        default=0.25,
+        metavar="F",
+        help="the window re-route stops starting windows once it has spent this share "
+        "of the routing's own time (default 0.25)",
+    )
+    parser.add_argument(
+        "--window-cap",
+        type=int,
+        default=40,
+        metavar="W",
+        help="at most this many windows per round, smallest first (default 40)",
+    )
+    parser.add_argument(
+        "--window-margin",
+        type=float,
+        default=1.5,
+        metavar="MM",
+        help="the first round's window margin around the stuck connection's pins (default 1.5)",
+    )
     parser.add_argument(
         "--hole-to-hole",
         type=float,
@@ -223,6 +276,8 @@ def main(argv: list[str] | None = None) -> int:
             ("access", args.access_cost is not None),
             ("negotiate", args.negotiate is not None),
             ("rollback", not args.rollback),
+            ("tree", not args.tree_nets),
+            ("window", args.window_reroute is not None),
         )
         if asked
     ]
@@ -237,7 +292,7 @@ def main(argv: list[str] | None = None) -> int:
         with open(dsn_path, encoding="utf-8") as f:
             dsn_text = f.read()
     except OSError as e:
-        print(f"freeroute: cannot read {dsn_path}: {e}", file=sys.stderr)
+        print(f"rpmroute: cannot read {dsn_path}: {e}", file=sys.stderr)
         return 2
 
     dsn = parse_dsn(dsn_text)
@@ -260,6 +315,12 @@ def main(argv: list[str] | None = None) -> int:
             "negotiate": args.negotiate or 0,
             "hole_to_hole_mm": args.hole_to_hole,
             "rollback": args.rollback,
+            "tree_nets": args.tree_nets,
+            "window_reroute": args.window_reroute or 0,
+            "window_resolution": args.window_resolution,
+            "window_margin_mm": args.window_margin,
+            "window_budget": args.window_budget,
+            "window_cap": args.window_cap,
         }
     elif args.engine == "grid":
         options = {
@@ -272,6 +333,7 @@ def main(argv: list[str] | None = None) -> int:
             "negotiate": args.negotiate or 0,
             "hole_to_hole_mm": args.hole_to_hole,
             "rollback": args.rollback,
+            "tree_nets": args.tree_nets,
         }
     if args.engine == "room":
         result = build_rooms_routing_result(
@@ -285,14 +347,14 @@ def main(argv: list[str] | None = None) -> int:
             dsn_text, args.engine, options, rounds=args.promote_failures, seed=args.seed
         )
         counts = ", ".join(str(m) for m, _z in rounds)
-        print(f"freeroute: {len(rounds)} rounds, unrouted {counts}; kept the best", file=sys.stderr)
+        print(f"rpmroute: {len(rounds)} rounds, unrouted {counts}; kept the best", file=sys.stderr)
     elif args.orders and args.orders > 1:
         result, kept, tried = best_of_orders(
             dsn_text, args.engine, options, orders=args.orders, seed=args.seed, jobs=args.jobs
         )
         counts = ", ".join(f"{'default' if s is None else s}: {m}" for s, (m, _z) in tried)
         print(
-            f"freeroute: tried {len(tried)} orders, kept "
+            f"rpmroute: tried {len(tried)} orders, kept "
             f"{'the default order' if kept is None else f'--seed {kept}'} (unrouted {counts})",
             file=sys.stderr,
         )
@@ -306,12 +368,12 @@ def main(argv: list[str] | None = None) -> int:
     in_zone = [u for u in result.unrouted if u[3]]
     if missing:
         # the SES is still written; say plainly what it is missing
-        print(f"freeroute: {len(missing)} connection(s) not routed:", file=sys.stderr)
+        print(f"rpmroute: {len(missing)} connection(s) not routed:", file=sys.stderr)
         for net, a, b, _zone in missing:
             print(f"  {net}: {a} to {b}", file=sys.stderr)
     if result.narrowed:
         print(
-            f"freeroute: {len(result.narrowed)} connection(s) of a wider net class only fitted "
+            f"rpmroute: {len(result.narrowed)} connection(s) of a wider net class only fitted "
             "at the default width; their nets are written at the default width:",
             file=sys.stderr,
         )
@@ -319,12 +381,23 @@ def main(argv: list[str] | None = None) -> int:
             print(f"  {net}: {a} to {b}", file=sys.stderr)
     if in_zone:
         print(
-            f"freeroute: {len(in_zone)} more connection(s) left to a zone fill that may join them:",
+            f"rpmroute: {len(in_zone)} more connection(s) left to a zone fill that may join them:",
             file=sys.stderr,
         )
         for net, a, b, zone in in_zone:
             print(f"  {net}: {a} to {b} (both in zone {zone})", file=sys.stderr)
 
+    if args.engine != "exact":
+        # These engines route on approximations and do not check the copper
+        # they write against exact shapes: a board can come out with shorts
+        # that this report would otherwise never mention.
+        print(
+            f"rpmroute: WARNING: the {args.engine} engine does not check its copper for "
+            "clearance or shorts; run KiCad's DRC on the result, or route with "
+            "--engine exact (the default)",
+            file=sys.stderr,
+        )
+
     if args.output:
         with open(args.output, "w", encoding="utf-8") as f:
             f.write(ses_text)

src/rpmroute/dsn/__init__.py

@@ -1,13 +1,13 @@
-"""Specctra DSN parsing for freeroute.
+"""Specctra DSN parsing for rpmroute.
 
 Public API::
 
-    from freeroute.dsn import parse_dsn
+    from rpmroute.dsn import parse_dsn
     board = parse_dsn(dsn_text)
 
-``parse_dsn`` returns a typed :class:`~freeroute.dsn.model.DsnBoard`. The
-lower-level :func:`~freeroute.dsn.tokenizer.tokenize` and
-:func:`~freeroute.dsn.sexp.parse` are exposed for tooling and tests.
+``parse_dsn`` returns a typed :class:`~rpmroute.dsn.model.DsnBoard`. The
+lower-level :func:`~rpmroute.dsn.tokenizer.tokenize` and
+:func:`~rpmroute.dsn.sexp.parse` are exposed for tooling and tests.
 """
 
 from __future__ import annotations

src/rpmroute/dsn/sexp.py

@@ -22,7 +22,7 @@ class SExp:
 
     ``head`` is the text of the first token when it is an atom (e.g. ``pcb``,
     ``layer``, ``net``), else ``None``. ``items`` holds the remaining elements,
-    each either a :class:`~freeroute.dsn.tokenizer.Token` (a leaf atom/string)
+    each either a :class:`~rpmroute.dsn.tokenizer.Token` (a leaf atom/string)
     or a nested :class:`SExp`.
     """
 

src/rpmroute/geometry/__init__.py

@@ -1,4 +1,4 @@
-"""Planar geometry primitives for freeroute.
+"""Planar geometry primitives for rpmroute.
 
 A port of the subset of FreeRouting's ``geometry/planar`` package the router
 needs, with the exact-arithmetic types preserved. Arithmetic model per type:
@@ -21,7 +21,7 @@ from .direction import Direction, IntDirection
 from .float_point import FloatPoint
 from .limits import CRIT_DOUBLE, CRIT_INT
 from .line import Line
-from .octagon import ceil_sqrt2, overlaps_2d, segment_octagon
+from .octagon import ceil_sqrt2, overlaps_2d, segment_octagon, segment_slab
 from .point import IntPoint, Point, RationalPoint, point, rational_point
 from .polygon import Polygon
 from .polygon_shape import PolygonShape
@@ -59,5 +59,6 @@ __all__ = [
     "shove_segment",
     "ceil_sqrt2",
     "segment_octagon",
+    "segment_slab",
     "overlaps_2d",
 ]

src/rpmroute/geometry/box.py

@@ -231,7 +231,7 @@ class IntBox:
         return [FloatPoint(c.x, c.y) for c in self.corners()]
 
     def to_simplex(self):
-        """Return this box as a :class:`~freeroute.geometry.simplex.Simplex`.
+        """Return this box as a :class:`~rpmroute.geometry.simplex.Simplex`.
 
         Four directed border lines whose common right side is the box interior
         (ports ``IntBox.to_Simplex``).

src/rpmroute/geometry/float_point.py

@@ -6,7 +6,7 @@ Ports ``geometry/planar/FloatPoint.java``.
 keeps ``FloatPoint`` *outside* the exact ``Point`` hierarchy because float math
 is inexact; it is used for distances, rounding, and speed-over-accuracy paths.
 Its :meth:`side_of` has no reliable ``COLLINEAR`` result (numerical noise), so
-exact side tests must go through :class:`~freeroute.geometry.point.Point`.
+exact side tests must go through :class:`~rpmroute.geometry.point.Point`.
 """
 
 from __future__ import annotations
@@ -137,13 +137,13 @@ class FloatPoint:
     # --- rounding to integer points ----------------------------------------
 
     def round(self):
-        """Round to the nearest :class:`~freeroute.geometry.point.IntPoint`."""
+        """Round to the nearest :class:`~rpmroute.geometry.point.IntPoint`."""
         from .point import IntPoint
 
         return IntPoint(_round_half_up(self.x), _round_half_up(self.y))
 
     def bounding_box(self):
-        """Smallest :class:`~freeroute.geometry.box.IntBox` containing this point."""
+        """Smallest :class:`~rpmroute.geometry.box.IntBox` containing this point."""
         from .box import IntBox
 
         return IntBox(

src/rpmroute/geometry/line.py

@@ -2,12 +2,12 @@
 
 Ports ``geometry/planar/Line.java`` (the subset needed for the router's
 half-plane work). Like the upstream class, a ``Line`` is defined by two
-:class:`~freeroute.geometry.point.IntPoint` endpoints.
+:class:`~rpmroute.geometry.point.IntPoint` endpoints.
 
 **Arithmetic model: exact.** :meth:`side_of` uses an exact integer determinant,
-and :meth:`intersection` returns an :class:`~freeroute.geometry.point.IntPoint`
+and :meth:`intersection` returns an :class:`~rpmroute.geometry.point.IntPoint`
 when the crossing is integral and a
-:class:`~freeroute.geometry.point.RationalPoint` otherwise (``z == 0`` when the
+:class:`~rpmroute.geometry.point.RationalPoint` otherwise (``z == 0`` when the
 lines are parallel — the "point at infinity"). :meth:`intersection_approx` is
 the fast ``float`` path.
 """

src/rpmroute/geometry/octagon.py

@@ -29,7 +29,7 @@ from .line import Line
 from .point import IntPoint
 from .simplex import Simplex
 
-__all__ = ["ceil_sqrt2", "segment_octagon", "overlaps_2d"]
+__all__ = ["ceil_sqrt2", "segment_octagon", "segment_slab", "overlaps_2d"]
 
 
 def ceil_sqrt2(radius: int) -> int:
@@ -82,6 +82,46 @@ def segment_octagon(a: IntPoint, b: IntPoint, radius: int) -> Simplex:
     return Simplex.get_instance(lines)
 
 
+def segment_slab(a: IntPoint, b: IntPoint, radius: int) -> Simplex:
+    """Convex cover of segment ``a``-``b`` swept by ``radius``, at any angle.
+
+    The rectangle along the segment, ``radius`` either side, with flush ends
+    like :func:`polyline.segment_box`: the ends of a trace leg sit on a pad or
+    on the square corner tile of the next leg, which cover them. Corners are
+    rounded away from the middle and the radius gets one unit more, so the
+    side bounds never under-report, and it stays tight for a slanted segment
+    off the 45-degree lines (a pin leaving along its pad's axis on a part
+    turned 30 degrees).
+    """
+    dx, dy = b.x - a.x, b.y - a.y
+    length = math.hypot(dx, dy)
+    r = max(radius, 0) + 1
+    if length == 0:
+        return Simplex.from_corners([
+            IntPoint(a.x - r, a.y - r), IntPoint(a.x + r, a.y - r),
+            IntPoint(a.x + r, a.y + r), IntPoint(a.x - r, a.y + r),
+        ])
+    ux, uy = dx / length, dy / length
+    nx, ny = -uy, ux
+    mx, my = (a.x + b.x) / 2, (a.y + b.y) / 2
+
+    def out(x: float, y: float) -> IntPoint:
+        return IntPoint(math.ceil(x) if x >= mx else math.floor(x),
+                        math.ceil(y) if y >= my else math.floor(y))
+
+    corners = [
+        out(a.x + nx * r, a.y + ny * r),
+        out(b.x + nx * r, b.y + ny * r),
+        out(b.x - nx * r, b.y - ny * r),
+        out(a.x - nx * r, a.y - ny * r),
+    ]
+    for winding in (corners, corners[::-1]):
+        slab = Simplex.from_corners(winding)
+        if not slab.is_empty():
+            return slab
+    return Simplex(())
+
+
 def overlaps_2d(shape_a, shape_b) -> bool:
     """True if the two convex tiles share 2-D area (a real clearance overlap).
 

src/rpmroute/geometry/polygon.py

@@ -1,7 +1,7 @@
 """``Polygon`` — a normalized corner list (no duplicate or collinear corners).
 
 Ports ``geometry/planar/Polygon.java``. Used as the corner normalizer behind
-:class:`~freeroute.geometry.polygon_shape.PolygonShape`.
+:class:`~rpmroute.geometry.polygon_shape.PolygonShape`.
 
 **Arithmetic model:** corner de-duplication and collinearity removal are
 **exact** (exact ``Point.side_of``); the winding-number test is approximate

src/rpmroute/geometry/polygon_shape.py

@@ -2,7 +2,7 @@
 
 Ports ``geometry/planar/PolygonShape.java``, in particular the recursive
 ``split_to_convex`` that decomposes a simple polygon into convex
-:class:`~freeroute.geometry.simplex.Simplex` tiles — the decomposition the
+:class:`~rpmroute.geometry.simplex.Simplex` tiles — the decomposition the
 router's search tree relies on.
 
 **Arithmetic model:** corner orientation / convexity tests are **exact**

src/rpmroute/geometry/polyline.py

@@ -7,7 +7,7 @@ trace half-width — the copper region — as a set of exact convex tiles.
 
 **Arithmetic model: exact, integer.** The router that uses this routes
 *orthogonally* (axis-aligned segments), so each swept segment is an exact
-:class:`~freeroute.geometry.box.IntBox` (centreline offset by the half-width,
+:class:`~rpmroute.geometry.box.IntBox` (centreline offset by the half-width,
 squared at the ends). The 45-degree case (which needs ``IntOctagon`` caps to
 stay exact) is deferred; ``segment_box`` returns the axis-aligned bounding box
 for a diagonal segment, which is a *conservative* cover (it never under-reports

src/rpmroute/geometry/simplex.py

@@ -1,10 +1,10 @@
 """``Simplex`` — a convex region as the intersection of directed half-planes.
 
 Ports ``geometry/planar/Simplex.java``. A simplex is defined by an array of
-directed :class:`~freeroute.geometry.line.Line`s sorted by direction angle; the
+directed :class:`~rpmroute.geometry.line.Line`s sorted by direction angle; the
 region is the intersection of the *right* half-plane of each line. Corners are
 the exact intersections of consecutive border lines
-(:meth:`~freeroute.geometry.line.Line.intersection`).
+(:meth:`~rpmroute.geometry.line.Line.intersection`).
 
 **Arithmetic model: exact where it matters.** Corners and all point-containment
 tests are exact (exact line intersection + exact ``side_of``). ``offset`` is

src/rpmroute/geometry/tile.py

@@ -3,11 +3,11 @@
 Ports the concrete (non-abstract) behaviour of ``geometry/planar/TileShape.java``
 that is defined purely in terms of the border lines and corners: point
 containment, area, centre of gravity, and border tests. Concrete subclasses
-(:class:`~freeroute.geometry.simplex.Simplex`) supply ``border_line_count``,
+(:class:`~rpmroute.geometry.simplex.Simplex`) supply ``border_line_count``,
 ``border_line``, ``corner`` and ``corner_approx``.
 
 **Arithmetic model:** containment and ``contains_on_border`` are **exact**
-(they use the exact :meth:`~freeroute.geometry.line.Line.side_of`); ``area`` and
+(they use the exact :meth:`~rpmroute.geometry.line.Line.side_of`); ``area`` and
 ``centre_of_gravity`` are approximate (``float``), as upstream.
 
 A convex tile is the intersection of the right half-planes of its directed

src/rpmroute/geometry/vector.py

@@ -13,7 +13,7 @@ Ports ``geometry/planar/{Vector,IntVector,RationalVector}.java``.
   representing the affine vector ``(x/z, y/z)``; ``z`` is kept non-negative.
   Mirrors the upstream ``BigInteger`` triple. ``BigIntDirection`` is not needed
   because ``int`` is unbounded, so normalized directions are always
-  :class:`~freeroute.geometry.direction.IntDirection`.
+  :class:`~rpmroute.geometry.direction.IntDirection`.
 """
 
 from __future__ import annotations

src/rpmroute/route/__init__.py

@@ -1,9 +1,9 @@
-"""Autorouting for freeroute.
+"""Autorouting for rpmroute.
 
 An MVP grid-based maze router and the DSN-in / SES-out pipeline that makes
-freeroute a Java-free replacement for the ``freerouting.jar`` step::
+rpmroute a Java-free replacement for the ``freerouting.jar`` step::
 
-    from freeroute.route import route
+    from rpmroute.route import route
     ses_text = route(dsn_text)
 
 The router (:class:`GridRouter`) is intentionally simple — single-layer A* over

src/rpmroute/route/exact_router.py

@@ -1,18 +1,18 @@
 """Exact-geometry routing track (orthogonal), built on the search tree.
 
-The grid MVP (:mod:`freeroute.route.grid_router`) approximates clearance with
+The grid MVP (:mod:`rpmroute.route.grid_router`) approximates clearance with
 cell occupancy and emits centrelines with no width-aware DRC check. This track
 keeps the grid's rip-up/multi-layer/via *topology* search (in orthogonal mode,
 so segments are axis-aligned) but replaces the occupancy check with an **exact**
-one: every item's copper is an exact :class:`~freeroute.geometry.IntBox` tile
-indexed in a :class:`~freeroute.board.search_tree.ShapeSearchTree`, and the
+one: every item's copper is an exact :class:`~rpmroute.geometry.IntBox` tile
+indexed in a :class:`~rpmroute.board.search_tree.ShapeSearchTree`, and the
 routed board is verified to have **no clearance violation** by exact tile
 intersection. A net whose copper would violate is dropped, so the output is
 DRC-clean by construction.
 
 **Shove (opt-in, ``shove=True``).** Before a dropped net is abandoned, the
 router tries to make room by *moving an existing trace aside* geometrically
-(:func:`~freeroute.geometry.shove_segment`) rather than dropping the incoming
+(:func:`~rpmroute.geometry.shove_segment`) rather than dropping the incoming
 net. A shove is accepted only if the moved trace still connects its pads, clears
 every other item exactly (via the tree), and stays in the board outline — so
 cleanliness is preserved. Shoves are bounded (``max_shove_depth`` and a
@@ -30,10 +30,10 @@ from __future__ import annotations
 from dataclasses import dataclass, field
 import math
 
-from freeroute.board.board import BasicBoard
-from freeroute.board.items import Pin, Via
-from freeroute.board.search_tree import ShapeSearchTree, TreeShape
-from freeroute.geometry import (
+from rpmroute.board.board import BasicBoard
+from rpmroute.board.items import Pin, Via
+from rpmroute.board.search_tree import ShapeSearchTree, TreeShape
+from rpmroute.geometry import (
     IntBox,
     IntPoint,
     Polyline,
@@ -41,9 +41,10 @@ from freeroute.geometry import (
     Simplex,
     segment_box,
     segment_octagon,
+    segment_slab,
     shove_segment,
 )
-from freeroute.geometry.polyline import corner_box
+from rpmroute.geometry.polyline import corner_box
 
 from .grid_router import RouteResult, route_board
 
@@ -101,9 +102,12 @@ def route_board_exact(
     access_cost: float = 0.0,
     negotiate: int = 0,
     rollback: bool = True,
+    tree_nets: bool = True,
     net_widths: dict[int, int] | None = None,
     via_drill: int | None = None,
     hole_to_hole: int = 0,
+    only_nets: frozenset | None = None,
+    bounds: IntBox | None = None,
 ) -> ExactRouteResult:
     """Route ``board`` orthogonally and verify the result with exact geometry.
 
@@ -137,9 +141,12 @@ def route_board_exact(
         access_cost=access_cost,
         negotiate=negotiate,
         rollback=rollback,
+        tree_nets=tree_nets,
         net_widths=net_widths,
         via_drill=via_drill,
         hole_to_hole=hole_to_hole,
+        only_nets=only_nets,
+        bounds=bounds,
     )
     edge = 0 if edge_clearance is None else edge_clearance
     outline = board.outline
@@ -193,20 +200,35 @@ def route_board_exact(
     # 25-pin supply net costs that one connection, not the whole net.
     rejected: list[tuple[int, str, str]] = []
     ends_list = result.connection_ends or [("?", "?", "")] * len(result.connections)
+    anchors_list = getattr(result, "connection_anchors", None) or [()] * len(result.connections)
     # each net is checked at the width it will be written at: its class's
     # when all of its connections went in at that, else the default
     net_half = dict(result.net_half)
-    for (net_no, wires, vias), ends in sorted(
-        zip(result.connections, ends_list, strict=False), key=lambda c: c[0][0]
+    # a connection that ended on another's copper (a T into its net's tree)
+    # dangles if that one is dropped, so it is dropped too; connections come
+    # in commit order, anchors first
+    dropped_at: set[int] = set()
+    for pos, ((net_no, wires, vias), ends, anchors) in sorted(
+        enumerate(zip(result.connections, ends_list, anchors_list, strict=False)),
+        key=lambda c: c[1][0][0],
     ):
+        if any(a in dropped_at for a in anchors):
+            dropped_at.add(pos)
+            rejected.append((net_no, *ends))
+            continue
         wire_half = net_half.get(net_no, half_width)
-        boxes = _copper_boxes(wires, vias, wire_half, via_layers, via_half)
-        wire_count = len(_copper_boxes(wires, [], wire_half, via_layers, via_half))
+        pieces = _copper_pieces(wires, vias, wire_half, via_layers, via_half)
+        boxes = [(box, box_layers) for box, box_layers, _ in pieces]
+        wire_count = len(_copper_pieces(wires, [], wire_half, via_layers, via_half))
         if any(
-            tree.clearance_conflict(
+            (
+                tree.segment_conflict(*seg, wire_half, net_no, layer, clearance)
+                if seg is not None
+                else tree.clearance_conflict(
                     box, net_no, layer, clearance, "wire" if i < wire_count else "via"
                 )
-            for i, (box, box_layers) in enumerate(boxes)
+            )
+            for i, (box, box_layers, seg) in enumerate(pieces)
             for layer in box_layers
         ) or _end_in_rule_area(tree, wires, wire_half) or (
             outline is not None and not _inside_outline(
@@ -214,6 +236,7 @@ def route_board_exact(
             )
         ):
             rejected.append((net_no, *ends))
+            dropped_at.add(pos)
             continue  # exact-clearance conflict -> drop (may be recovered by shove)
         acc = accepted.get(net_no)
         if acc is None:
@@ -225,16 +248,25 @@ def route_board_exact(
             v for v in dict.fromkeys(vias)
             if v not in acc.vias and not _on_fixed_via(net_no, v, fixed_vias, via_half)
         )
-        for box, box_layers in boxes:
+        for box, box_layers, seg in pieces:
             oid = next(owner)
+            if seg is None:
                 tree.insert(TreeShape(oid, net_no, box_layers, box, routed=True))
+            else:  # a slanted pin exit: its exact copper, rebuilt for the DRC check
+                tree.insert(TreeShape(
+                    oid, net_no, box_layers, box, routed=True,
+                    exact=segment_slab(*seg, wire_half), seg=("slab", *seg, wire_half),
+                ))
             acc.owners.append(oid)
 
     accepted_before_recovery = set(accepted)
     # a net is dropped if it has a real ratsnest (>= 2 pins on a signal layer)
     # but was not accepted — whether the grid failed to route it or its exact
     # copper conflicted.
-    dropped = sorted(_routable_nets(board, signal_layers) - set(accepted))
+    routable = _routable_nets(board, signal_layers)
+    if only_nets is not None:  # a window re-route: the other nets are not ours to route
+        routable &= set(only_nets)
+    dropped = sorted(routable - set(accepted))
 
     shoves = 0
     if shove and dropped:
@@ -259,7 +291,7 @@ def route_board_exact(
 
     if diagonal:
         outline = board.bounding_box
-        for net_no in sorted(_routable_nets(board, signal_layers)):
+        for net_no in sorted(routable):
             _diagonalize(
                 net_no, board, tree, accepted, owner, signal_layers, half_width, clearance, outline
             )
@@ -601,7 +633,7 @@ def _conflicting_segment(corners, d_boxes, half_width, clearance):
         horizontal = a.y == b.y
         if not horizontal and a.x != b.x:
             continue  # skip diagonal grid stubs
-        from freeroute.geometry import segment_box
+        from rpmroute.geometry import segment_box
 
         seg = segment_box(a, b, half_width).offset(clearance)
         if any(seg.overlaps(box) for box in d_boxes):
@@ -662,6 +694,27 @@ def _on_fixed_via(net_no, point, fixed_vias, via_half) -> bool:
     )
 
 
+def _copper_pieces(wires, vias, half_width, via_layers, via_half=None):
+    """Like :func:`_copper_boxes`, but a slanted wire segment (a pin leaving
+    along a turned pad's axis) comes with its end points, so it can be checked
+    on its exact copper: ``(box, layers, (a, b) or None)``."""
+    via_half = via_half or half_width
+    pieces: list[tuple[IntBox, frozenset[int], tuple | None]] = []
+    for layer, points in wires:
+        on = frozenset({layer})
+        for a, b in zip(points, points[1:], strict=False):
+            if a.x == b.x or a.y == b.y:
+                pieces.append((segment_box(a, b, half_width), on, None))
+            else:
+                pieces.append((segment_slab(a, b, half_width).bounding_box(), on, (a, b)))
+        for c in points[1:-1]:
+            pieces.append((corner_box(c, half_width), on, None))
+    for loc in vias:
+        vbox = IntBox(loc.x - via_half, loc.y - via_half, loc.x + via_half, loc.y + via_half)
+        pieces.append((vbox, via_layers, None))
+    return pieces
+
+
 def _copper_boxes(wires, vias, half_width, via_layers, via_half=None):
     via_half = via_half or half_width
     boxes: list[tuple[IntBox, frozenset[int]]] = []

src/rpmroute/route/grid_router.py

@@ -31,11 +31,11 @@ import itertools
 import math
 import random
 
-from freeroute.board.board import BasicBoard
-from freeroute.board.items import ConductionArea, ObstacleArea, Pin, Via
-from freeroute.geometry import IntBox, IntPoint, Simplex
-from freeroute.geometry.octagon import overlaps_2d
-from freeroute.geometry.polyline import corner_box
+from rpmroute.board.board import BasicBoard
+from rpmroute.board.items import ConductionArea, ObstacleArea, Pin, Via
+from rpmroute.geometry import IntBox, IntPoint, Simplex
+from rpmroute.geometry.octagon import overlaps_2d, segment_slab
+from rpmroute.geometry.polyline import corner_box, segment_box
 
 __all__ = ["GridRouter", "RouteResult", "route_board"]
 
@@ -65,7 +65,7 @@ class RouteResult:
 
     __slots__ = (
         "wires", "vias", "half_width", "unrouted", "connections", "connection_ends", "failed",
-        "net_half", "narrowed",
+        "net_half", "narrowed", "connection_anchors",
     )
 
     def __init__(self, half_width: int) -> None:
@@ -79,6 +79,9 @@ class RouteResult:
         #: what each routed connection joins, and the zone both ends sit in
         #: (or ""), parallel to ``connections``
         self.connection_ends: list[tuple[str, str, str]] = []
+        #: for each routed connection, the earlier ones (positions in
+        #: ``connections``) whose copper it ended on, parallel to ``connections``
+        self.connection_anchors: list[tuple[int, ...]] = []
         #: connections left unrouted: (net_no, one end, the other end)
         self.failed: list[tuple[int, str, str]] = []
         #: half width of each net routed wider than the default (its class)
@@ -126,6 +129,10 @@ class _Connection:
         "narrow",
         "half",
         "stubs",
+        "stub_near",
+        "anchors",
+        "copper",
+        "seq",
     )
 
     def __init__(self, index: int, net_no: int, a: Pin, b: Pin) -> None:
@@ -143,6 +150,8 @@ class _Connection:
         self.halo_nodes: list[Node] = []
         # each end's stub: its layer, its copper tiles, and the nodes it claims
         self.stubs: list[tuple[int, list[IntBox], set[Node]]] = []
+        # every node its stubs come near, claimed or not (see GridRouter._stub_near)
+        self.stub_near: list[Node] = []
         # the pins and zones each end may use, and which pin the route ended
         # on (None when it ended on a zone)
         self.a_group: tuple[list[Pin], list] = ([a], [])
@@ -155,6 +164,14 @@ class _Connection:
         # routed at the default width instead; the half width it went in at
         self.narrow = False
         self.half = 0
+        # connections whose copper this one ended on (a T into its net's
+        # tree): ripping one of them leaves this one dangling
+        self.anchors: frozenset[int] = frozenset()
+        # the nodes of its committed copper (path cells, via cells on every
+        # layer), where another connection of its net may end
+        self.copper: frozenset[Node] = frozenset()
+        # commit order: a connection is always committed after its anchors
+        self.seq = 0
 
 
 class GridRouter:
@@ -185,8 +202,27 @@ class GridRouter:
         net_widths: dict[int, int] | None = None,
         via_drill: int | None = None,
         hole_to_hole: int = 0,
+        tree_nets: bool = True,
+        only_nets: frozenset | None = None,
+        bounds: IntBox | None = None,
     ) -> None:
         self.board = board
+        # A window re-route routes some nets inside part of the board: only
+        # these nets get connections, and the grid covers only ``bounds``
+        # (cells outside it do not exist, so nothing is routed there).
+        self.only_nets = frozenset(only_nets) if only_nets is not None else None
+        self._bounds = bounds
+        # connections with an end outside ``bounds``: never searched, since
+        # the grid has no cells to reach that end by
+        self._outside: set[int] = set()
+        # Multi-pin nets: pair a net's pin groups by a minimum spanning tree,
+        # and let a connection start or end on copper its net already routed
+        # (a T into the tree), not only on one chosen pin.
+        self.tree = bool(tree_nets)
+        self._dependents: dict[int, set[int]] = {}
+        self._commits = 0
+        self._plane_nets: set[int] = set()
+        self._net_conns: dict[int, list[_Connection]] = {}
         # Pin access: while a pin still has connections to route, the cells
         # its route would leave by (its end cells, the via it may need there,
         # and the clearance around both) cost other nets this much extra, so
@@ -218,6 +254,12 @@ class GridRouter:
         self._escape_cells = 12
         self._crowded_cache: dict = {}
         self._trapped_cache: dict = {}
+        # pin location -> where a pin on a turned fine-pitch pad leaves its
+        # pin row along the pad's axis (None: it leaves like any other pin)
+        self._axis_exits: dict[IntPoint, IntPoint | None] = {}
+        # and the other nets' pads near each such pin, its stubs' obstacles
+        self._axis_pads: dict[IntPoint, list] = {}
+        self._part_centres: dict[int, tuple[float, float] | None] = {}
         self.heuristic_weight = max(float(heuristic_weight), 1.0)
         self.trace_width = max(trace_width, 1)
         self.clearance = max(clearance, 0)
@@ -292,6 +334,11 @@ class GridRouter:
         self.layers = list(layers)
 
         box = board.bounding_box
+        if bounds is not None:
+            box = IntBox(
+                max(box.ll.x, bounds.ll.x), max(box.ll.y, bounds.ll.y),
+                min(box.ur.x, bounds.ur.x), min(box.ur.y, bounds.ur.y),
+            )
         self.origin_x = box.ll.x
         self.origin_y = box.ll.y
         self.cols = max(1, math.ceil((box.ur.x - box.ll.x) / self.step) + 1)
@@ -309,6 +356,12 @@ class GridRouter:
         self._zone_cells: dict[int, list[Node]] = {}
         # per-connection occupancy (owner = connection index)
         self._cell_owner: dict[Node, int] = {}
+        # Node -> connections whose stub comes near it. A cell has one owner,
+        # and a stub claims only cells nobody owns yet, so where several pins
+        # leave side by side (a QFN turned 45 degrees: neighbours 0.35 mm apart
+        # on each axis) the cell two stubs share names only the first, and the
+        # exact check between the later stubs would never run.
+        self._stub_near: dict[Node, set[int]] = {}
         # every connection whose via covers a cell, in claim order: a via two
         # connections share still blocks after the first of them is ripped,
         # and a route through it must rip all of them
@@ -536,6 +589,13 @@ class GridRouter:
                 if conns[i].net_no != net_no:
                     blocking = i
                     break
+        if blocking is None:
+            # another net's pin stub comes too close, though the cell it once
+            # claimed may since have been freed by a rip of its first owner
+            for i in self._stub_near.get(node, ()):
+                if conns[i].net_no != net_no:
+                    blocking = i
+                    break
         if blocking is None:
             return 0.0
         if not allow_ripup:
@@ -661,6 +721,8 @@ class GridRouter:
     def _search(
         self, conn: _Connection, allow_ripup: bool, conns: list[_Connection]
     ) -> list[Node] | None:
+        if conn.index in self._outside:
+            return None
         half = self._conn_half(conn)
         self._cur_half, self._spread = half, self._spread_for(half)
         try:
@@ -677,6 +739,13 @@ class GridRouter:
             goal_cell = self._group_target(conn.a_group)
         starts = self._group_ends(conn.a_group, conn.net_no, conns, allow_ripup)
         goals = self._group_ends(conn.b_group, conn.net_no, conns, allow_ripup)
+        # either side may also start or end on copper its net already routed
+        a_tree = self._tree_ends(conn, conn.a_group)
+        b_tree = self._tree_ends(conn, conn.b_group)
+        for node in a_tree:
+            starts.setdefault(node, None)
+        for node in b_tree:
+            goals.setdefault(node, None)
         if not starts or not goals:
             return None
         # A start that is already an end joins at once, except that ending on
@@ -689,6 +758,7 @@ class GridRouter:
         ]
         if common:
             conn.a_end, conn.b_end = starts[common[0]], goals[common[0]]
+            conn.anchors = _anchors([common[0]], starts, goals, a_tree, b_tree)
             return [common[0]]
         net_no = conn.net_no
 
@@ -754,6 +824,7 @@ class GridRouter:
                 if ok:
                     path = _reconstruct(came_from, current)
                     conn.a_end, conn.b_end = starts.get(path[0]), end
+                    conn.anchors = _anchors(path, starts, goals, a_tree, b_tree)
                     return path
             cx, cy, cl = current
             base = g_score[current]
@@ -800,6 +871,55 @@ class GridRouter:
                         )
         return None
 
+    def _tree_ends(self, conn: _Connection, group) -> dict[Node, frozenset[int]]:
+        """Copper its net has already routed on ``group``'s side of ``conn``: a
+        route may start or end anywhere on it. Each node maps to what a route
+        ending there relies on: the connection that laid the copper and every
+        one between it and ``group`` (routed connections of a net form a
+        forest, so that path is unique). Ripping any of them would cut the
+        route off. Empty for plane nets, which keep their drops to the plane,
+        and when tree routing is off."""
+        if not self.tree or conn.net_no in self._plane_nets:
+            return {}
+        adjacent: dict[int, list[tuple[int, _Connection]]] = {}
+        for c in self._net_conns.get(conn.net_no, ()):
+            if c is conn or not c.routed:
+                continue
+            a, b = id(c.a_group), id(c.b_group)
+            adjacent.setdefault(a, []).append((b, c))
+            adjacent.setdefault(b, []).append((a, c))
+        owners: dict[Node, frozenset[int]] = {}
+        path_to: dict[int, frozenset[int]] = {id(group): frozenset()}
+        stack = [id(group)]
+        while stack:
+            here = stack.pop()
+            for other, c in adjacent.get(here, ()):
+                if other in path_to:
+                    continue
+                path = path_to[here] | {c.index}
+                path_to[other] = path
+                stack.append(other)
+                for node in c.copper:
+                    # a walled cell's via moved into the pad: no copper there
+                    if node not in self._keepout and node not in self._via_only:
+                        owners.setdefault(node, path)
+        return owners
+
+    def _with_dependents(self, victims: list[_Connection], conns: list[_Connection]) -> list[_Connection]:
+        """``victims`` and every routed connection that ended on their copper,
+        directly or through another: ripping a route rips the routes teed onto
+        it, which would otherwise dangle. Anchors come before what hangs on
+        them, as they were committed."""
+        found = {v.index: v for v in victims}
+        stack = list(victims)
+        while stack:
+            for i in self._dependents.get(stack.pop().index, ()):
+                c = conns[i]
+                if c.routed and i not in found:
+                    found[i] = c
+                    stack.append(c)
+        return sorted(found.values(), key=lambda c: (c.seq, c.index))
+
     # --- pin stubs ----------------------------------------------------------
     # A pin rarely sits on a cell centre, so every route starts and ends with a
     # short stub from the pin to its first cell. The grid has to see that
@@ -857,30 +977,143 @@ class GridRouter:
         clearance of the pad next door, though the straight exit clears it.
         """
         end = self._cell_center(cell)
-        dx, dy = end.x - pin_location.x, end.y - pin_location.y
+        head = [pin_location]
+        start = pin_location
+        exit_point = self._axis_exits.get(pin_location)
+        if exit_point is not None:
+            # a pin on a turned fine-pitch pad first leaves along the pad's
+            # axis, past the pin row, then takes the usual L to its cell
+            head = [pin_location, exit_point]
+            start = exit_point
+        dx, dy = end.x - start.x, end.y - start.y
         if not self._orthogonal or dx == 0 or dy == 0:
-            return [pin_location, end]
-        if abs(dx) >= abs(dy):
-            return [pin_location, IntPoint(end.x, pin_location.y), end]
-        return [pin_location, IntPoint(pin_location.x, end.y), end]
+            tail = [end]
+        elif abs(dx) >= abs(dy):
+            tail = [IntPoint(end.x, start.y), end]
+        else:
+            tail = [IntPoint(start.x, end.y), end]
+        points = []
+        for point in head + tail:
+            if not points or points[-1] != point:
+                points.append(point)
+        return points if len(points) > 1 else [pin_location, end]
+
+    def _leg_shapes(self, points: list[IntPoint], half: int, grow: int = 0) -> list:
+        """A stub's copper, grown by ``grow``: a box per straight leg and per
+        inner corner, and an exact slab for a slanted leg (a pad-axis exit),
+        whose bounding box would reach the neighbouring pads."""
+        shapes: list = []
+        for a, b in zip(points, points[1:], strict=False):
+            if a == b:
+                continue
+            if a.x == b.x or a.y == b.y:
+                box = segment_box(a, b, half)
+                shapes.append(box.offset(grow) if grow else box)
+            else:
+                shapes.append(segment_slab(a, b, half + grow))
+        for c in points[1:-1]:
+            box = corner_box(c, half)
+            shapes.append(box.offset(grow) if grow else box)
+        return shapes
+
+    def _axis_exit(self, pin: Pin) -> IntPoint | None:
+        """Where a pin on a turned fine-pitch pad clears its pin row.
+
+        A QFN placed at 45 degrees has no straight exit on the grid: every
+        horizontal or vertical step from a pin passes its neighbours closer
+        than the clearance. The way out is along the pad's own axis, away
+        from the part, until an L from there to a grid cell clears every
+        other net's pad (checked on exact shapes, as the exact engine will).
+        Any angle off the grid axes counts, not just 45 degrees.
+        """
+        loc = pin.location
+        if loc in self._axis_exits:
+            return self._axis_exits[loc]
+        self._axis_exits[loc] = None
+        shape = pin.shape
+        if not isinstance(shape, Simplex) or shape.is_int_box():
+            return None
+        corners = [shape.corner_approx(i) for i in range(shape.border_line_count())]
+        edges = [(b.x - a.x, b.y - a.y) for a, b in zip(corners, corners[1:] + corners[:1], strict=False)]
+        lengths = [math.hypot(dx, dy) for dx, dy in edges]
+        if len(edges) < 3 or max(lengths) < 1.25 * min(lengths):
+            return None  # no long axis to leave along
+        dx, dy = edges[lengths.index(max(lengths))]
+        ux, uy = dx / max(lengths), dy / max(lengths)
+        if min(abs(ux), abs(uy)) < 0.17:
+            return None  # within ten degrees of a grid axis: the usual exits work
+        centre = self._part_centre(pin)
+        if centre is None:
+            return None
+        if (loc.x - centre[0]) * ux + (loc.y - centre[1]) * uy < 0:
+            ux, uy = -ux, -uy
+        reach = max((c.x - loc.x) * ux + (c.y - loc.y) * uy for c in corners)
+        h, cl = self.half_width, self.clearance
+        span = reach + h + cl + 16 * self.step
+        others = [
+            p.shape for p in self.board.get_pins()
+            if p.shape is not None and p is not pin and not set(p.net_nos) & set(pin.net_nos)
+            and set(p.layers) & set(pin.layers)
+            and abs(p.location.x - loc.x) < 2 * span and abs(p.location.y - loc.y) < 2 * span
+        ]
+        self._axis_pads[loc] = others
+        for j in range(16):
+            d = reach + h + cl + j * self.step / 2
+            exit_point = IntPoint(round(loc.x + ux * d), round(loc.y + uy * d))
+            out = segment_slab(loc, exit_point, h + cl)
+            if any(overlaps_2d(out, o) for o in others):
+                continue
+            ex, ey = self._cell_of(exit_point)
+            self._axis_exits[loc] = exit_point
+            for ddx, ddy in itertools.product((0, -1, 1), repeat=2):
+                cell = (ex + ddx, ey + ddy)
+                if not (0 <= cell[0] < self.cols and 0 <= cell[1] < self.rows):
+                    continue
+                legs = self._leg_shapes(self._stub_points(loc, cell)[1:], h, cl)
+                if not any(overlaps_2d(g, o) for g in legs for o in others):
+                    return exit_point
+            self._axis_exits[loc] = None
+        return None
+
+    def _exit_clips_a_pad(self, pin: Pin, cell: Cell) -> bool:
+        """Whether the stub from an axis exit to ``cell`` comes closer than the
+        clearance to another net's pad (exactly, as the exact engine checks):
+        the exit was chosen with one clear cell, not every cell around it."""
+        legs = self._leg_shapes(
+            self._stub_points(pin.location, cell)[1:], self._cur_half, self.clearance
+        )
+        return any(overlaps_2d(g, pad) for g in legs for pad in self._axis_pads.get(pin.location, ()))
+
+    def _part_centre(self, pin: Pin) -> tuple[float, float] | None:
+        key = pin.component_no
+        if key not in self._part_centres:
+            mates = [p.location for p in self.board.get_pins() if p.component_no == key] if key else []
+            self._part_centres[key] = (
+                (sum(m.x for m in mates) / len(mates), sum(m.y for m in mates) / len(mates))
+                if len(mates) > 2 else None
+            )
+        return self._part_centres[key]
 
     def _stub_cells(self, pin_location: IntPoint, cell: Cell, half: int | None = None) -> list[Cell]:
         """Cells where another net's trace would come too close to the stub."""
-        from freeroute.board.outline import _point_segment
+        from rpmroute.board.outline import _point_segment
 
         points = self._stub_points(pin_location, cell)
-        end = points[-1]
         reach = (half or self._cur_half) + self.half_width + self.clearance
         box = IntBox(
-            min(pin_location.x, end.x), min(pin_location.y, end.y),
-            max(pin_location.x, end.x), max(pin_location.y, end.y),
+            min(p.x for p in points), min(p.y for p in points),
+            max(p.x for p in points), max(p.y for p in points),
         )
         legs = list(zip(points, points[1:], strict=False))
-        return [
-            c
-            for c in self._cells_in_box(box, reach)
-            if min(_point_segment(self._cell_center(c), a, b) for a, b in legs) < reach
-        ]
+        joints = points[1:]  # each carries a square corner tile
+
+        def near(c) -> bool:
+            p = self._cell_center(c)
+            if min(_point_segment(p, a, b) for a, b in legs) < reach:
+                return True
+            return any(max(abs(p.x - j.x), abs(p.y - j.y)) < reach for j in joints)
+
+        return [c for c in self._cells_in_box(box, reach) if near(c)]
 
     def _stub_clear(
         self,
@@ -896,13 +1129,12 @@ class GridRouter:
         if keepouts:
             # the stub is off the grid, so check it exactly, as the exact
             # engine will: its copper grown by clearance must miss every keepout
-            from freeroute.geometry.polyline import Polyline, PolylineShape
-
             points = self._stub_points(pin.location, cell)
             if points[-1] != pin.location:
-                for tile in PolylineShape(Polyline(points), self._cur_half).tiles():
-                    grown = tile.offset(self.clearance)
-                    if any(k.overlaps(grown if needs else tile) for k, needs in keepouts):
+                legs = self._leg_shapes(points, self._cur_half)
+                grown_legs = self._leg_shapes(points, self._cur_half, self.clearance)
+                for tile, grown in zip(legs, grown_legs, strict=True):
+                    if any(overlaps_2d(k, grown if needs else tile) for k, needs in keepouts):
                         return False
                 # the track's round end at the pin, for a rule area
                 cap = corner_box(pin.location, self._cur_half)
@@ -916,15 +1148,16 @@ class GridRouter:
             allow_ripup and all(conns[i].rip_count < self.rip_cap for i in owners)
         )
 
-    def _stub_tiles(self, pin_location: IntPoint, cell: Cell, half: int) -> list[IntBox]:
-        """The stub's copper: its legs, and a square at each corner and at the
-        cell end, where the route carries on."""
+    def _stub_tiles(self, pin_location: IntPoint, cell: Cell, half: int, grow: int = 0) -> list:
+        """The stub's copper (grown by ``grow``): its legs, and a square at each
+        corner and at the cell end, where the route carries on."""
         points = self._stub_points(pin_location, cell)
-        tiles = [corner_box(point, half) for point in points[1:]]
+        tiles: list = [
+            corner_box(point, half).offset(grow) if grow else corner_box(point, half)
+            for point in points[1:]
+        ]
         if len(points) > 1 and points[-1] != pin_location:
-            from freeroute.geometry.polyline import Polyline, PolylineShape
-
-            tiles += PolylineShape(Polyline(points), half).tiles()
+            tiles += self._leg_shapes(points, half, grow)
         return tiles
 
     def _stub_owners(
@@ -944,13 +1177,23 @@ class GridRouter:
                 other = [tiles for lay, tiles, nodes in conns[owner].stubs if node in nodes]
                 if other:
                     if grown is None:
-                        grown = [
-                            t.offset(self.clearance)
-                            for t in self._stub_tiles(pin.location, cell, half or self._cur_half)
-                        ]
-                    if not any(g.overlaps(t) for tiles in other for t in tiles for g in grown):
+                        grown = self._stub_tiles(
+                            pin.location, cell, half or self._cur_half, self.clearance
+                        )
+                    if not any(overlaps_2d(g, t) for tiles in other for t in tiles for g in grown):
                         continue
                 owners.add(owner)
+            for idx in self._stub_near.get(node, ()):
+                if idx in owners or conns[idx].net_no == net_no:
+                    continue
+                theirs = [tiles for lay, tiles, _ in conns[idx].stubs if lay == layer]
+                if theirs:
+                    if grown is None:
+                        grown = self._stub_tiles(
+                            pin.location, cell, half or self._cur_half, self.clearance
+                        )
+                    if any(overlaps_2d(g, t) for tiles in theirs for t in tiles for g in grown):
+                        owners.add(idx)
             owners.update(self._via_others(c, net_no, conns))
         return owners
 
@@ -1031,11 +1274,16 @@ class GridRouter:
         return self._cell_of(IntPoint((box.ll.x + box.ur.x) // 2, (box.ll.y + box.ur.y) // 2))
 
     def _stub_cost(self, pin: Pin, node: Node) -> float:
+        if self._axis_exits.get(pin.location) is None:
             c = self._cell_center(node[:2])
             dx, dy = abs(c.x - pin.location.x), abs(c.y - pin.location.y)
             if self._orthogonal:  # measured the way the route itself is allowed to move
                 return (dx + dy) / self.step
             return math.hypot(dx, dy) / self.step
+        points = self._stub_points(pin.location, node[:2])
+        return sum(
+            math.hypot(b.x - a.x, b.y - a.y) for a, b in zip(points, points[1:], strict=False)
+        ) / self.step
 
     def _end_nodes(self, pin: Pin, net_no: int, conns, allow_ripup: bool = False) -> set[Node]:
         """Nodes a route may start or end on for ``pin``: the nearest cell and
@@ -1045,14 +1293,21 @@ class GridRouter:
         everywhere else, or a pin whose only way out another net has taken
         could never have it back."""
         layers = [layer for layer in pin.layers if layer in self.layers]
-        cx, cy = self._cell_of(pin.location)
+        exit_point = None
+        if self._orthogonal and self._crowded(pin, net_no):
+            exit_point = self._axis_exit(pin)
+        cx, cy = self._cell_of(exit_point if exit_point is not None else pin.location)
         nodes: set[Node] = set()
         for dx, dy in ((0, 0), *self._neighbours):
             cell = (cx + dx, cy + dy)
             if not (0 <= cell[0] < self.cols and 0 <= cell[1] < self.rows):
                 continue
+            if exit_point is not None and self._exit_clips_a_pad(pin, cell):
+                continue
             for layer in layers:
-                if (dx or dy) and self._enter_cost(cell, layer, net_no, allow_ripup, conns) is None:
+                # the pin's own cell is in its pad; an exit cell is not
+                checked = dx or dy or exit_point is not None
+                if checked and self._enter_cost(cell, layer, net_no, allow_ripup, conns) is None:
                     continue
                 if self._stub_clear(pin, cell, layer, net_no, conns, allow_ripup=allow_ripup):
                     nodes.add((*cell, layer))
@@ -1062,6 +1317,11 @@ class GridRouter:
         # cost, so it is only taken where a short step would not do.
         if self._orthogonal and self._crowded(pin, net_no) and self._trapped(pin, net_no, nodes):
             nodes |= self._escape_nodes(pin, net_no, conns, layers, (cx, cy), allow_ripup)
+        if not nodes and exit_point is not None:
+            # every cell past the pin row is taken: report no way out, so the
+            # search goes on to rip-up, rather than fall back to a cell out in
+            # the open on top of another net's route
+            return nodes
         if not nodes:  # nothing clear: fall back to the nearest cell, as before
             nodes = {(cx, cy, layer) for layer in layers}
             if self._keepout_boxes and not any(
@@ -1135,7 +1395,6 @@ class GridRouter:
         whose stub from the pin clears every other net's pad by the full
         clearance, checked on the stub's copper tiles as the exact engine
         will rather than on the grid."""
-        from freeroute.geometry.polyline import Polyline, PolylineShape
 
         reach = self._escape_cells
         near = [
@@ -1157,17 +1416,14 @@ class GridRouter:
                 cell = (cx + dx * k + sx, cy + dy * k + sy)
                 if not (0 <= cell[0] < self.cols and 0 <= cell[1] < self.rows):
                     break
-                grown = [
-                    tile.offset(self.clearance)
-                    for tile in PolylineShape(
-                        Polyline(self._stub_points(pin.location, cell)), self._cur_half
-                    ).tiles()
-                ]
+                grown = self._leg_shapes(
+                    self._stub_points(pin.location, cell), self._cur_half, self.clearance
+                )
                 for layer in layers:
                     if self._enter_cost(cell, layer, net_no, allow_ripup, conns) is None:
                         continue
                     if any(
-                        layer in box_layers and any(g.overlaps(box) for g in grown)
+                        layer in box_layers and any(overlaps_2d(g, box) for g in grown)
                         for box, box_layers in near
                     ):
                         continue
@@ -1230,6 +1486,7 @@ class GridRouter:
                     conn.via_halo.append(c)
         ends = ((conn.a_end, wire_segs[0], 0), (conn.b_end, wire_segs[-1], -1)) if wire_segs else ()
         conn.stubs = []
+        self._forget_stubs(conn)
         for pin, (layer, cells), at in ends:
             if not isinstance(pin, Pin):
                 continue  # ended on a zone or a plane: no stub
@@ -1237,6 +1494,8 @@ class GridRouter:
             claimed: set[Node] = set()
             for c in self._stub_cells(pin.location, cell, half):
                 node = (*c, layer)
+                self._stub_near.setdefault(node, set()).add(conn.index)
+                conn.stub_near.append(node)
                 if node not in self._cell_owner:
                     self._cell_owner[node] = conn.index
                     conn.trace_cells.append((c, layer))
@@ -1270,8 +1529,24 @@ class GridRouter:
             # via k joins wire segments k and k + 1
             conn.vias[0 if idx == 0 else idx - 1] = location
         conn.routed = True
+        self._commits += 1
+        conn.seq = self._commits
+        conn.copper = frozenset(path) | frozenset(
+            (*cell, layer) for cell in conn.via_cells for layer in self.layers
+        )
+        for anchor in conn.anchors:
+            self._dependents.setdefault(anchor, set()).add(conn.index)
         self._settle(conn, -1)
 
+    def _forget_stubs(self, conn: _Connection) -> None:
+        for node in conn.stub_near:
+            near = self._stub_near.get(node)
+            if near is not None:
+                near.discard(conn.index)
+                if not near:
+                    del self._stub_near[node]
+        conn.stub_near = []
+
     def _rip(self, conn: _Connection) -> None:
         for cell, layer in conn.trace_cells:
             if self._cell_owner.get((*cell, layer)) == conn.index:
@@ -1292,6 +1567,7 @@ class GridRouter:
         conn.halo_nodes = []
         conn.trace_cells = []
         conn.stubs = []
+        self._forget_stubs(conn)
         for cell in conn.via_cells:
             count = self._via_nets.get(cell)
             if count and count.get(conn.net_no):
@@ -1302,6 +1578,12 @@ class GridRouter:
         conn.wires = []
         conn.vias = []
         conn.routed = False
+        for anchor in conn.anchors:
+            hanging = self._dependents.get(anchor)
+            if hanging is not None:
+                hanging.discard(conn.index)
+        conn.anchors = frozenset()
+        conn.copper = frozenset()
         conn.rip_count += 1
         self._settle(conn, +1)
 
@@ -1328,6 +1610,9 @@ class GridRouter:
             for i in self._halo.get((cx, cy, cl), ()):
                 if conns[i].net_no != net_no:
                     owners.add(i)
+            for i in self._stub_near.get((cx, cy, cl), ()):
+                if conns[i].net_no != net_no:
+                    owners.add(i)
         return owners
 
     # --- pin access ---------------------------------------------------------
@@ -1514,7 +1799,7 @@ class GridRouter:
                     crossed |= self._stub_owners(
                         end, node[:2], node[2], conn.net_no, conns, self._conn_half(conn)
                     )
-            victims = [conns[i] for i in sorted(crossed)]
+            victims = self._with_dependents([conns[i] for i in sorted(crossed)], conns)
             if self.rollback:
                 return self._ripup_transaction(conn, path, victims, conns)
             for victim in victims:
@@ -1525,7 +1810,7 @@ class GridRouter:
     def _ripup_transaction(self, conn, path, victims, conns) -> bool:
         """Route ``conn`` through ``victims``, reroute them at once in free
         space, and undo it all if fewer connections end up routed."""
-        saved = [(v, v.path, v.a_end, v.b_end, v.rip_count) for v in victims]
+        saved = [(v, v.path, v.a_end, v.b_end, v.rip_count, v.anchors) for v in victims]
         own_rips = conn.rip_count
         for victim in victims:
             self._rip(victim)
@@ -1543,8 +1828,8 @@ class GridRouter:
                 self._rip(victim)
         self._rip(conn)
         conn.rip_count = own_rips
-        for victim, old_path, a_end, b_end, rips in saved:
-            victim.a_end, victim.b_end = a_end, b_end
+        for victim, old_path, a_end, b_end, rips, anchors in saved:
+            victim.a_end, victim.b_end, victim.anchors = a_end, b_end, anchors
             self._commit(victim, old_path)
             victim.rip_count = rips
         return False
@@ -1566,8 +1851,11 @@ class GridRouter:
                 planes_by_net.setdefault(zone.net_nos[0], []).append(zone)
         plane_ids = frozenset(id(z) for zs in planes_by_net.values() for z in zs)
         conns: list[_Connection] = []
+        self._plane_nets: set[int] = set()
         nets = set(pins_by_net) | set(zones_by_net) | set(planes_by_net)
         # deterministic: fewer-pin nets first, then by net number
+        if self.only_nets is not None:
+            nets &= self.only_nets
         for net_no in sorted(nets, key=lambda n: (len(pins_by_net.get(n, [])), n)):
             zones = zones_by_net.get(net_no, []) + planes_by_net.get(net_no, [])
             groups = _connected_groups(
@@ -1578,20 +1866,31 @@ class GridRouter:
                 # a plane net: every other group goes straight to the plane
                 # (usually a stub and a via), not pad to pad across the board
                 pairs = [(g, hubs[0]) for g in groups if g is not hubs[0]]
+                self._plane_nets.add(net_no)
+            elif self.tree:
+                pairs = _spanning_pairs(groups)
             else:
                 pairs = list(zip(groups, groups[1:], strict=False))
             for ga, gb in pairs:
                 conn = _Connection(len(conns), net_no, _first(ga[0]), _first(gb[0]))
                 conn.a_group, conn.b_group = ga, gb
                 conns.append(conn)
+        self._net_conns: dict[int, list[_Connection]] = {}
+        for conn in conns:
+            self._net_conns.setdefault(conn.net_no, []).append(conn)
+        if self._bounds is not None:
+            self._outside = {
+                c.index for c in conns
+                if not (_group_inside(c.a_group, self._bounds) and _group_inside(c.b_group, self._bounds))
+            }
         return conns
 
     def _fixed_pieces(self, net_no: int) -> list[_FixedPiece]:
         """The net's tracks and vias already on the board, as connectivity."""
         cache = getattr(self, "_fixed_cache", None)
         if cache is None:
-            from freeroute.board.items import Trace
-            from freeroute.geometry.polyline import Polyline, PolylineShape, corner_box
+            from rpmroute.board.items import Trace
+            from rpmroute.geometry.polyline import Polyline, PolylineShape, corner_box
 
             cache = self._fixed_cache = {}
             for item in self.board.get_items():
@@ -1633,18 +1932,22 @@ class GridRouter:
         return wide, narrowed
 
     def _snapshot(self, conns: list[_Connection]) -> list[tuple]:
+        # in commit order, so a connection teed onto another comes after it;
+        # its anchors as positions in this list
+        routed = sorted((c for c in conns if c.routed), key=lambda c: (c.seq, c.index))
+        position = {c.index: i for i, c in enumerate(routed)}
         return [
             (c.net_no, [(layer, list(pts)) for layer, pts in c.wires], list(c.vias),
-             (*_ends_of(c), self._left_to_zone(c)))
-            for c in conns
-            if c.routed
+             (*_ends_of(c), self._left_to_zone(c)),
+             tuple(sorted(position[a] for a in c.anchors if a in position)))
+            for c in routed
         ]
 
     def _result_from(self, snapshot, unrouted: int) -> RouteResult:
         result = RouteResult(self.half_width)
         written: set[tuple[int, IntPoint]] = set()
         result.unrouted = unrouted
-        for net_no, wires, vias, ends in snapshot:
+        for net_no, wires, vias, ends, anchors in snapshot:
             for layer, points in wires:
                 result.add_wire(net_no, layer, points)
             for location in vias:
@@ -1655,7 +1958,8 @@ class GridRouter:
                 result.add_via(net_no, location)
             result.connections.append((net_no, wires, vias))
             result.connection_ends.append(ends)
-        routed = {ends[:2] + (net_no,) for net_no, _w, _v, ends in snapshot}
+            result.connection_anchors.append(anchors)
+        routed = {ends[:2] + (net_no,) for net_no, _w, _v, ends, _a in snapshot}
         result.failed = [
             (c.net_no, *_ends_of(c), self._left_to_zone(c))
             for c in self._conns
@@ -1668,6 +1972,53 @@ def _first(items):
     return items[0] if items else None
 
 
+def _anchors(path, starts, goals, a_tree, b_tree) -> frozenset[int]:
+    """What a found path relies on: the connections between the copper it
+    starts or ends on and its own groups."""
+    found: set[int] = set()
+    if starts.get(path[0]) is None and path[0] in a_tree:
+        found |= a_tree[path[0]]
+    if goals.get(path[-1]) is None and path[-1] in b_tree:
+        found |= b_tree[path[-1]]
+    return frozenset(found)
+
+
+def _group_points(group) -> list[tuple[int, int]]:
+    pins, zones = group
+    if pins:
+        return [(p.location.x, p.location.y) for p in pins]
+    points = []
+    for zone in zones:
+        box = zone.bounding_box()
+        points.append(((box.ll.x + box.ur.x) // 2, (box.ll.y + box.ur.y) // 2))
+    return points or [(0, 0)]
+
+
+def _spanning_pairs(groups) -> list[tuple]:
+    """A minimum spanning tree over a net's groups (Prim, Manhattan distance
+    between their nearest pins), as (in the tree, joining it) pairs: each
+    connection joins the nearest group not yet joined, not the next in pin
+    order."""
+    if len(groups) < 2:
+        return []
+    points = [_group_points(g) for g in groups]
+
+    def gap(i: int, j: int) -> int:
+        return min(abs(ax - bx) + abs(ay - by) for ax, ay in points[i] for bx, by in points[j])
+
+    best = {j: (gap(0, j), 0) for j in range(1, len(groups))}
+    pairs = []
+    while best:
+        j = min(best, key=lambda k: (best[k][0], k))
+        _, i = best.pop(j)
+        pairs.append((groups[i], groups[j]))
+        for k in best:
+            d = gap(j, k)
+            if d < best[k][0]:
+                best[k] = (d, j)
+    return pairs
+
+
 def _group_label(group) -> str:
     pins, zones = group
     parts = [f"{p.component_ref}-{p.name}" for p in pins[:3]]
@@ -1677,6 +2028,19 @@ def _group_label(group) -> str:
     return "/".join(parts) or "?"
 
 
+def _group_inside(group, bounds: IntBox) -> bool:
+    """A group has a pin inside ``bounds``, or a zone reaching into it."""
+    pins, zones = group
+    if any(bounds.ll.x <= p.location.x <= bounds.ur.x and bounds.ll.y <= p.location.y <= bounds.ur.y
+           for p in pins):
+        return True
+    for zone in zones:
+        box = zone.bounding_box()
+        if box.ll.x <= bounds.ur.x and bounds.ll.x <= box.ur.x and box.ll.y <= bounds.ur.y and bounds.ll.y <= box.ur.y:
+            return True
+    return False
+
+
 def _ends_of(conn) -> tuple[str, str]:
     """A readable description of what a connection joins."""
     return _group_label(conn.a_group), _group_label(conn.b_group)
@@ -1865,9 +2229,12 @@ def route_board(
     access_cost: float = 0.0,
     negotiate: int = 0,
     rollback: bool = True,
+    tree_nets: bool = True,
     net_widths: dict[int, int] | None = None,
     via_drill: int | None = None,
     hole_to_hole: int = 0,
+    only_nets: frozenset | None = None,
+    bounds: IntBox | None = None,
 ) -> RouteResult:
     """Convenience wrapper: build a :class:`GridRouter` and route the board."""
     router = GridRouter(
@@ -1888,8 +2255,11 @@ def route_board(
         access_cost=access_cost,
         negotiate=negotiate,
         rollback=rollback,
+        tree_nets=tree_nets,
         net_widths=net_widths,
         via_drill=via_drill,
         hole_to_hole=hole_to_hole,
+        only_nets=only_nets,
+        bounds=bounds,
     )
     return router.route()

src/rpmroute/route/orders.py

@@ -15,8 +15,8 @@ from __future__ import annotations
 from concurrent.futures import ProcessPoolExecutor
 import os
 
-from freeroute.dsn import parse_dsn
-from freeroute.ses import RoutingResult
+from rpmroute.dsn import parse_dsn
+from rpmroute.ses import RoutingResult
 
 from .pipeline import build_exact_routing_result, build_routing_result
 

src/rpmroute/route/pipeline.py

@@ -13,14 +13,16 @@ to DSN units (dividing by the resolution) for the SES ``(wire (path ...))`` and
 from __future__ import annotations
 
 import re
+import time
 
-from freeroute.board import build_board
-from freeroute.dsn import DsnBoard, parse_dsn
-from freeroute.ses import RoutedVia, RoutedWire, RoutingResult, write_ses
+from rpmroute.board import build_board
+from rpmroute.dsn import DsnBoard, parse_dsn
+from rpmroute.ses import RoutedVia, RoutedWire, RoutingResult, write_ses
 
 from .exact_router import ExactRouteResult, route_board_exact
 from .grid_router import RouteResult, route_board
 from .room_router import route_board_rooms
+from .window import window_reroute as window_reroute_stage
 
 __all__ = ["route", "route_dsn_board", "build_routing_result"]
 
@@ -121,6 +123,7 @@ def route_dsn_board(
     negotiate: int = 0,
     hole_to_hole_mm: float = 0.25,
     rollback: bool = True,
+    tree_nets: bool = True,
 ) -> tuple[RouteResult, int, list[str]]:
     """Route a parsed :class:`DsnBoard`; return the board-unit result, the scale,
     and the layer names. ``layers`` restricts routing to those signal-layer
@@ -146,6 +149,7 @@ def route_dsn_board(
         access_cost=access_cost,
         negotiate=negotiate,
         rollback=rollback,
+        tree_nets=tree_nets,
         net_widths=_net_widths_board(dsn, scale),
         via_drill=_via_drill_board(dsn, scale),
         hole_to_hole=_mm_to_board(dsn, scale, hole_to_hole_mm) or 0,
@@ -201,6 +205,7 @@ def build_routing_result(
     negotiate: int = 0,
     hole_to_hole_mm: float = 0.25,
     rollback: bool = True,
+    tree_nets: bool = True,
 ) -> RoutingResult:
     """Route ``dsn`` (grid track) and convert to a DSN-unit RoutingResult."""
     route, scale, layer_names = route_dsn_board(
@@ -211,6 +216,7 @@ def build_routing_result(
         negotiate=negotiate,
         hole_to_hole_mm=hole_to_hole_mm,
         rollback=rollback,
+        tree_nets=tree_nets,
     )
     return _to_routing_result(route, dsn, scale, layer_names)
 
@@ -232,6 +238,12 @@ def route_dsn_board_exact(
     negotiate: int = 0,
     hole_to_hole_mm: float = 0.25,
     rollback: bool = True,
+    tree_nets: bool = True,
+    window_reroute: int = 0,
+    window_resolution: int = 4,
+    window_margin_mm: float = 1.5,
+    window_budget: float = 0.25,
+    window_cap: int = 40,
 ) -> tuple[ExactRouteResult, int, list[str]]:
     """Route a parsed :class:`DsnBoard` with the exact-geometry (orthogonal,
     DRC-verified) track; return the exact result, the scale, and layer names.
@@ -243,27 +255,47 @@ def route_dsn_board_exact(
     edge_clearance_board = _mm_to_board(dsn, scale, edge_clearance_mm)
     width_board = round(_rule_width_dsn(dsn) * scale)
     clearance_board = round(_rule_clearance_dsn(dsn) * scale)
+    # the settings a window re-route repeats, at its own resolution
+    common = {
+        "heuristic_weight": heuristic_weight,
+        "via_half": _via_half_board(dsn, scale),
+        "edge_clearance": edge_clearance_board,
+        "trace_width": width_board,
+        "clearance": clearance_board,
+        "layers": layers,
+        "max_passes": max_passes,
+        "rip_up": rip_up,
+        "shove": shove,
+        "diagonal": diagonal,
+        "rollback": rollback,
+        "tree_nets": tree_nets,
+        "net_widths": _net_widths_board(dsn, scale),
+        "via_drill": _via_drill_board(dsn, scale),
+        "hole_to_hole": _mm_to_board(dsn, scale, hole_to_hole_mm) or 0,
+    }
+    started = time.monotonic()
     exact = route_board_exact(
         board,
         resolution=resolution,
-        heuristic_weight=heuristic_weight,
-        via_half=_via_half_board(dsn, scale),
-        edge_clearance=edge_clearance_board,
-        trace_width=width_board,
-        clearance=clearance_board,
-        layers=layers,
-        max_passes=max_passes,
-        rip_up=rip_up,
-        shove=shove,
-        diagonal=diagonal,
         seed=seed,
         route_first=route_first,
         access_cost=access_cost,
         negotiate=negotiate,
-        rollback=rollback,
-        net_widths=_net_widths_board(dsn, scale),
-        via_drill=_via_drill_board(dsn, scale),
-        hole_to_hole=_mm_to_board(dsn, scale, hole_to_hole_mm) or 0,
+        **common,
+    )
+    if window_reroute > 0:
+        via_half = common["via_half"] or max(width_board // 2, 1)
+        exact.result = window_reroute_stage(
+            dsn, exact.result, common,
+            rounds=window_reroute,
+            resolution=max(int(window_resolution), resolution),
+            margin=_mm_to_board(dsn, scale, window_margin_mm) or 0,
+            via_half=via_half,
+            via_drill=common["via_drill"] or 2 * via_half,
+            via_name=_via_padstack(dsn),
+            # a share of what the routing itself took
+            budget_s=max(float(window_budget), 0.0) * (time.monotonic() - started),
+            max_windows=window_cap,
         )
     return exact, scale, [layer.name for layer in dsn.layers]
 
@@ -285,6 +317,12 @@ def build_exact_routing_result(
     negotiate: int = 0,
     hole_to_hole_mm: float = 0.25,
     rollback: bool = True,
+    tree_nets: bool = True,
+    window_reroute: int = 0,
+    window_resolution: int = 4,
+    window_margin_mm: float = 1.5,
+    window_budget: float = 0.25,
+    window_cap: int = 40,
 ) -> RoutingResult:
     """Route ``dsn`` (exact track) and convert to a DSN-unit RoutingResult."""
     exact, scale, layer_names = route_dsn_board_exact(
@@ -303,6 +341,12 @@ def build_exact_routing_result(
         negotiate=negotiate,
         hole_to_hole_mm=hole_to_hole_mm,
         rollback=rollback,
+        tree_nets=tree_nets,
+        window_reroute=window_reroute,
+        window_resolution=window_resolution,
+        window_margin_mm=window_margin_mm,
+        window_budget=window_budget,
+        window_cap=window_cap,
     )
     return _to_routing_result(exact.result, dsn, scale, layer_names)
 

src/rpmroute/route/room_router.py

@@ -30,10 +30,10 @@ from __future__ import annotations
 from dataclasses import dataclass, field
 import heapq
 
-from freeroute.board.board import BasicBoard
-from freeroute.board.items import Pin
-from freeroute.board.search_tree import ShapeSearchTree, TreeShape
-from freeroute.geometry import IntBox, IntPoint, Polyline, PolylineShape, shove_segment
+from rpmroute.board.board import BasicBoard
+from rpmroute.board.items import Pin
+from rpmroute.board.search_tree import ShapeSearchTree, TreeShape
+from rpmroute.geometry import IntBox, IntPoint, Polyline, PolylineShape, shove_segment
 
 from .exact_router import ExactRouteResult, _routable_nets
 from .grid_router import RouteResult
@@ -56,7 +56,7 @@ class _Accepted:
     ``wires`` / ``vias`` are the *same* list objects as ``RouteResult.wires`` /
     ``.vias`` for this net, so rewriting a shoved wire in place also updates the
     routed output. ``wire_owners`` is parallel to ``wires``: each entry is the
-    list of :class:`~freeroute.board.search_tree.TreeShape` owner ids for that
+    list of :class:`~rpmroute.board.search_tree.TreeShape` owner ids for that
     wire's copper tiles, so a later shove can locate, remove, and roll back a
     specific wire without disturbing a multi-wire net's other connections.
     """

src/rpmroute/route/shove.py

@@ -1,6 +1,6 @@
 """Shared orthogonal shove primitives for the exact and room routers.
 
-The exact-geometry router (:mod:`freeroute.route.exact_router`) grew the first
+The exact-geometry router (:mod:`rpmroute.route.exact_router`) grew the first
 shove implementation; the continuous room router reuses its geometry so both
 tracks agree on how a blocking trace's conflicting segment is found, how the
 perpendicular displacement ladder is generated, and how a reshaped trace is
@@ -19,8 +19,8 @@ from __future__ import annotations
 
 from collections.abc import Iterator
 
-from freeroute.board.search_tree import ShapeSearchTree, TreeShape
-from freeroute.geometry import IntBox, IntPoint, Polyline, PolylineShape
+from rpmroute.board.search_tree import ShapeSearchTree, TreeShape
+from rpmroute.geometry import IntBox, IntPoint, Polyline, PolylineShape
 
 from .exact_router import _conflicting_segment as conflicting_segment
 

src/rpmroute/route/window.py

@@ -0,0 +1,248 @@
+"""Window re-route: a last stage for the connections still unrouted.
+
+Around each stuck connection a window is cut: the box of its two end pins
+plus a margin. Every net whose routed copper lies wholly inside it is
+ripped; everything else stays, as fixed copper. The window is then routed
+again on its own, on a finer grid than the whole board can afford, the
+stuck connection's net and the ripped nets only. The result is kept only
+if fewer connections are left unrouted than before; otherwise the board is
+as it was. Each round doubles the margin for the connections still stuck.
+
+It is a last stage, so it is kept cheap: a window's board holds only what
+the window needs (every pin and piece of copper of the nets it reroutes,
+so their connectivity is unchanged, and of the other items only those near
+the window), the smallest windows go first, at most ``max_windows`` run per
+round, and no new window starts once ``budget_s`` seconds are spent.
+
+What makes it differ from re-running the same search near the failure: the
+finer grid finds gaps the board's grid steps over, and the ripped nets go in
+again in a new order around the stuck one. A finer grid on the whole board
+costs routes elsewhere (its cells are slower and its order changes); inside
+a small window it only ever replaces what it can improve.
+"""
+
+from __future__ import annotations
+
+import time
+from typing import Any
+
+from rpmroute.board import BasicBoard, build_board
+from rpmroute.board.items import ObstacleArea, Pin, Trace, Via
+from rpmroute.dsn import DsnBoard
+from rpmroute.geometry import IntBox, IntPoint
+
+from .exact_router import route_board_exact
+from .grid_router import RouteResult
+
+Copper = tuple[list[tuple[int, list[IntPoint]]], list[IntPoint]]
+
+
+def _pin_labels(board) -> dict[tuple[int, str], IntPoint]:
+    """Each pin's location by (net, label), the label a failure names it by."""
+    found: dict[tuple[int, str], IntPoint] = {}
+    for pin in board.get_pins():
+        for net in pin.net_nos:
+            found.setdefault((net, f"{pin.component_ref}-{pin.name}"), pin.location)
+    return found
+
+
+def _end_point(labels, net: int, label: str) -> IntPoint | None:
+    """Where a failure's end is: the first pin its label names."""
+    return labels.get((net, label.split("/")[0]))
+
+
+def _inside(copper: Copper, window: IntBox) -> bool:
+    wires, vias = copper
+    points = [p for _layer, path in wires for p in path] + list(vias)
+    return bool(points) and all(
+        window.ll.x <= p.x <= window.ur.x and window.ll.y <= p.y <= window.ur.y for p in points
+    )
+
+
+def _item_box(item) -> IntBox | None:
+    if isinstance(item, (Pin, Via)):
+        return item.shape.bounding_box() if item.shape is not None else None
+    if isinstance(item, ObstacleArea):
+        return item.bounding_box()
+    if isinstance(item, Trace) and item.corners:
+        h = item.half_width
+        xs, ys = [p.x for p in item.corners], [p.y for p in item.corners]
+        return IntBox(min(xs) - h, min(ys) - h, max(xs) + h, max(ys) + h)
+    return None
+
+
+def _meets(box: IntBox | None, view: IntBox) -> bool:
+    return box is not None and box.ll.x <= view.ur.x and view.ll.x <= box.ur.x and (
+        box.ll.y <= view.ur.y and view.ll.y <= box.ur.y
+    )
+
+
+def _path_box(path: list[IntPoint], grow: int) -> IntBox:
+    xs, ys = [p.x for p in path], [p.y for p in path]
+    return IntBox(min(xs) - grow, min(ys) - grow, max(xs) + grow, max(ys) + grow)
+
+
+def _window_board(
+    base: BasicBoard, base_items: list, view: IntBox, affected: set[int],
+    copper: dict[int, Copper], keep: set[int], half: dict[int, int], default_half: int,
+    via_half: int, via_drill: int, layers: list[int], via_name: str,
+) -> BasicBoard:
+    """The board a window is routed on: the base board's items of the nets
+    being rerouted and those near ``view``, plus the routed copper being kept
+    (all of an affected net's, so its connectivity is the whole board's, and
+    of other nets only what is near ``view``), as fixed copper."""
+    board = BasicBoard(base.layer_structure, base.nets, base.clearance_matrix, base.bounding_box)
+    board.outline = base.outline
+    for item, box in base_items:
+        if (item.net_nos and item.net_nos[0] in affected) or _meets(box, view):
+            board.insert(item)
+    for net in keep:
+        wires, vias = copper.get(net, ([], []))
+        width = half.get(net, default_half)
+        mine = net in affected
+        for layer, path in wires:
+            if len(path) >= 2 and (mine or _meets(_path_box(path, width), view)):
+                board.insert(Trace(net_nos=[net], fixed=True, layer=layer, half_width=width, corners=list(path)))
+        for location in dict.fromkeys(vias):
+            shape = IntBox(location.x - via_half, location.y - via_half,
+                           location.x + via_half, location.y + via_half)
+            if mine or _meets(shape, view):
+                board.insert(Via(
+                    net_nos=[net], fixed=True, padstack_name=via_name, drill=via_drill,
+                    location=location, layers=list(layers), shape=shape,
+                ))
+    return board
+
+
+def _open(failed) -> list:
+    """Failures that are real opens, not connections left to a zone fill."""
+    return [f for f in failed if not (len(f) > 3 and f[3])]
+
+
+def window_reroute(
+    dsn: DsnBoard,
+    result: RouteResult,
+    route_args: dict[str, Any],
+    *,
+    rounds: int,
+    resolution: int,
+    margin: int,
+    via_half: int,
+    via_drill: int,
+    via_name: str,
+    budget_s: float | None = None,
+    max_windows: int = 40,
+) -> RouteResult:
+    """Re-route a window around each still-failing connection; keep only gains.
+
+    ``route_args`` are the exact engine's settings for the whole board (width,
+    clearance, layers, shove, ...); the window runs them at ``resolution``.
+    ``margin`` is the first round's window margin in board units. No new
+    window starts once ``budget_s`` seconds have gone by (None: no limit),
+    and at most ``max_windows`` run per round."""
+    started = time.monotonic()
+    if rounds < 1 or not _open(result.failed):
+        return result
+    default_half = result.half_width
+    copper: dict[int, Copper] = {
+        net: (list(result.wires.get(net, [])), list(result.vias.get(net, [])))
+        for net in set(result.wires) | set(result.vias)
+    }
+    half = dict(result.net_half)
+    failed = list(result.failed)
+    base = build_board(dsn)
+    base_items = [(item, _item_box(item)) for item in base.get_items()]
+    layers = route_args.get("layers") or [
+        i for i, layer in enumerate(base.layer_structure.arr) if layer.is_signal
+    ]
+    labels = _pin_labels(base)
+    # the copper a window's routing can feel from outside it
+    context = 2 * (route_args["trace_width"] + route_args["clearance"]) + 2 * via_half + (
+        route_args.get("edge_clearance") or 0
+    )
+
+    def window_of(entry, reach: int) -> IntBox | None:
+        ends = [_end_point(labels, entry[0], label) for label in entry[1:3]]
+        ends = [p for p in ends if p is not None]
+        if not ends:
+            return None
+        return IntBox(
+            min(p.x for p in ends) - reach, min(p.y for p in ends) - reach,
+            max(p.x for p in ends) + reach, max(p.y for p in ends) + reach,
+        )
+
+    def area(box: IntBox | None) -> float:
+        return float("inf") if box is None else (box.ur.x - box.ll.x) * (box.ur.y - box.ll.y)
+
+    changed = out_of_time = False
+    for rnd in range(rounds):
+        reach = margin * (2 ** rnd)
+
+        # the cheap wins first: the smallest windows
+        todo = sorted(_open(list(failed)), key=lambda f: area(window_of(f, reach)))
+        for entry in todo[:max(int(max_windows), 1)]:
+            if budget_s is not None and time.monotonic() - started >= budget_s:
+                out_of_time = True
+                break
+            if entry not in failed:
+                continue  # an earlier window routed it
+            net = entry[0]
+            window = window_of(entry, reach)
+            if window is None:
+                continue
+            victims = {n for n, c in copper.items() if _inside(c, window)}
+            affected = victims | {net}
+            before = _open(f for f in failed if f[0] in affected)
+            keep = set(copper) - victims
+            view = IntBox(window.ll.x - context, window.ll.y - context,
+                          window.ur.x + context, window.ur.y + context)
+            board = _window_board(base, base_items, view, affected, copper, keep, half,
+                                  default_half, via_half, via_drill, layers, via_name)
+            sub = route_board_exact(
+                board, **route_args, resolution=resolution,
+                only_nets=frozenset(affected), bounds=window,
+                route_first=frozenset((f[0], f[1], f[2]) for f in before),
+            ).result
+            after = _open(f for f in sub.failed if f[0] in affected)
+            if len(after) >= len(before):
+                continue
+            # the window board left out what lies away from it, so copper
+            # reaching out of the window was never checked against it
+            if any(not _inside((sub.wires.get(n, []), sub.vias.get(n, [])), window)
+                   for n in affected if sub.wires.get(n) or sub.vias.get(n)):
+                continue
+            # a net keeping some of its copper is written at one width: the
+            # window's new copper has to have gone in at that width too
+            if any(
+                n not in victims and copper.get(n) and (sub.wires.get(n) or sub.vias.get(n))
+                and sub.net_half.get(n, default_half) != half.get(n, default_half)
+                for n in affected
+            ):
+                continue
+            for n in affected:
+                kept_wires, kept_vias = copper.get(n, ([], [])) if n not in victims else ([], [])
+                copper[n] = (kept_wires + sub.wires.get(n, []), kept_vias + sub.vias.get(n, []))
+                if n in victims:
+                    half.pop(n, None)
+                    if n in sub.net_half:
+                        half[n] = sub.net_half[n]
+            failed = [f for f in failed if f[0] not in affected] + [
+                f for f in sub.failed if f[0] in affected
+            ]
+            changed = True
+        if out_of_time or not _open(failed):
+            break
+
+    if not changed:
+        return result
+    out = RouteResult(default_half)
+    for net, (wires, vias) in copper.items():
+        for layer, path in wires:
+            out.add_wire(net, layer, path)
+        for location in dict.fromkeys(vias):
+            out.add_via(net, location)
+    out.failed = failed
+    out.unrouted = len(_open(failed))
+    out.net_half = half
+    out.narrowed = list(result.narrowed)
+    return out

src/rpmroute/ses/__init__.py

@@ -1,9 +1,9 @@
-"""Specctra SES (session) writing for freeroute.
+"""Specctra SES (session) writing for rpmroute.
 
 Public API::
 
-    from freeroute.dsn import parse_dsn
-    from freeroute.ses import write_ses, RoutingResult, RoutedWire, RoutedVia
+    from rpmroute.dsn import parse_dsn
+    from rpmroute.ses import write_ses, RoutingResult, RoutedWire, RoutedVia
 
     board = parse_dsn(dsn_text)
     ses_text = write_ses(board)                 # valid no-op session

src/rpmroute/ses/writer.py

@@ -1,8 +1,8 @@
 """Specctra SES session-file writer.
 
 Ports the write path of FreeRouting's ``io/specctra/SesWriter.java`` to operate
-on this project's parsed :class:`~freeroute.dsn.model.DsnBoard` plus an
-in-memory :class:`~freeroute.ses.model.RoutingResult`. The emitted structure is::
+on this project's parsed :class:`~rpmroute.dsn.model.DsnBoard` plus an
+in-memory :class:`~rpmroute.ses.model.RoutingResult`. The emitted structure is::
 
     (session <name>
       (base_design <name>)
@@ -30,8 +30,8 @@ from __future__ import annotations
 
 import math
 
-from freeroute.dsn.model import DsnBoard
-from freeroute.dsn.shapes import Circle, Path, Polygon, Rectangle, Shape
+from rpmroute.dsn.model import DsnBoard
+from rpmroute.dsn.shapes import Circle, Path, Polygon, Rectangle, Shape
 
 from .indent import Identifier, IndentWriter
 from .model import RoutedNet, RoutedVia, RoutedWire, RoutingResult

tests/board/test_board.py

@@ -2,7 +2,7 @@
 
 from __future__ import annotations
 
-from freeroute.board import (
+from rpmroute.board import (
     ClearanceMatrix,
     CoordinateTransform,
     Layer,

tests/board/test_build.py

@@ -15,9 +15,9 @@ import sys
 
 import pytest
 
-from freeroute.board import BasicBoard, ObstacleArea, Pin, build_board
-from freeroute.dsn import parse_dsn
-from freeroute.geometry import IntPoint
+from rpmroute.board import BasicBoard, ObstacleArea, Pin, build_board
+from rpmroute.dsn import parse_dsn
+from rpmroute.geometry import IntPoint
 
 sys.path.insert(0, str(Path(__file__).resolve().parent.parent))
 
@@ -184,7 +184,7 @@ def test_place_keepout_does_not_block_routing():
 
 
 def test_grid_router_leaves_the_interior_of_a_ring_keepout_open():
-    from freeroute.route.pipeline import route_dsn_board
+    from rpmroute.route.pipeline import route_dsn_board
 
     ring_only = "\n".join(
         line for line in _RING_DSN.splitlines() if "wire_keepout" not in line
@@ -251,7 +251,7 @@ def test_oval_pad_keeps_its_width():
 
 
 def test_via_size_comes_from_the_via_padstack():
-    from freeroute.route.pipeline import _via_half_board
+    from rpmroute.route.pipeline import _via_half_board
 
     assert _via_half_board(parse_dsn(_PAD_DSN), 10) == 3000   # 0.6 mm via, board units
 
@@ -279,7 +279,7 @@ def test_a_keepout_named_rule_area_takes_no_clearance():
 
 
 def _route_channel(name):
-    from freeroute.route.pipeline import build_exact_routing_result
+    from rpmroute.route.pipeline import build_exact_routing_result
 
     return build_exact_routing_result(parse_dsn(_CHANNEL_DSN.format(name=name)), resolution=2)
 

tests/board/test_search_tree.py

@@ -2,8 +2,8 @@
 
 from __future__ import annotations
 
-from freeroute.board import ShapeSearchTree, TreeShape
-from freeroute.geometry import IntBox
+from rpmroute.board import ShapeSearchTree, TreeShape
+from rpmroute.geometry import IntBox
 
 
 def shape(owner, net, layer, box, routed=False):

tests/dsn/test_reader.py

@@ -6,10 +6,10 @@ from pathlib import Path
 
 import pytest
 
-from freeroute.dsn import parse_dsn
-from freeroute.dsn.reader import DsnParseError
-from freeroute.dsn.shapes import Circle, Rectangle
-from freeroute.dsn.shapes import Path as DsnPath
+from rpmroute.dsn import parse_dsn
+from rpmroute.dsn.reader import DsnParseError
+from rpmroute.dsn.shapes import Circle, Rectangle
+from rpmroute.dsn.shapes import Path as DsnPath
 
 FIXTURES = Path(__file__).parent / "fixtures"
 

tests/dsn/test_sexp.py

@@ -4,8 +4,8 @@ from __future__ import annotations
 
 import pytest
 
-from freeroute.dsn.sexp import SExp, parse
-from freeroute.dsn.tokenizer import DsnSyntaxError, Token
+from rpmroute.dsn.sexp import SExp, parse
+from rpmroute.dsn.tokenizer import DsnSyntaxError, Token
 
 
 def test_parse_simple_head_and_values():

tests/dsn/test_shapes.py

@@ -2,8 +2,8 @@
 
 from __future__ import annotations
 
-from freeroute.dsn.sexp import parse
-from freeroute.dsn.shapes import (
+from rpmroute.dsn.sexp import parse
+from rpmroute.dsn.shapes import (
     Circle,
     Path,
     Polygon,

tests/dsn/test_tokenizer.py

@@ -4,7 +4,7 @@ from __future__ import annotations
 
 import pytest
 
-from freeroute.dsn.tokenizer import DsnSyntaxError, TokenKind, tokenize
+from rpmroute.dsn.tokenizer import DsnSyntaxError, TokenKind, tokenize
 
 
 def kinds(text: str) -> list[TokenKind]:

tests/geometry/test_box.py

@@ -6,7 +6,7 @@ containment and degenerate (empty / point / segment) tiles.
 
 from __future__ import annotations
 
-from freeroute.geometry import IntBox, IntPoint, IntVector, RationalPoint
+from rpmroute.geometry import IntBox, IntPoint, IntVector, RationalPoint
 
 
 def test_measures():

tests/geometry/test_direction.py

@@ -5,7 +5,7 @@ Oracles hand-derived from ``geometry/planar/{Direction,IntDirection}.java``.
 
 from __future__ import annotations
 
-from freeroute.geometry import Direction, IntDirection, IntPoint, IntVector, Side
+from rpmroute.geometry import Direction, IntDirection, IntPoint, IntVector, Side
 
 
 def test_normalized_direction_reduces_by_gcd():

tests/geometry/test_line.py

@@ -5,7 +5,7 @@ Oracles hand-derived from ``geometry/planar/Line.java``.
 
 from __future__ import annotations
 
-from freeroute.geometry import IntPoint, Line, RationalPoint, Side
+from rpmroute.geometry import IntPoint, Line, RationalPoint, Side
 
 
 def test_side_of_point():
@@ -79,7 +79,7 @@ def test_intersection_approx_matches_exact():
 def test_translate_and_opposite():
     line = Line.from_coords(0, 0, 4, 0)
     assert line.opposite().direction().equals(line.direction()) is False
-    from freeroute.geometry import IntVector
+    from rpmroute.geometry import IntVector
 
     moved = line.translate_by(IntVector(0, 5))
     assert moved.side_of(IntPoint(2, 5)) == Side.COLLINEAR

tests/geometry/test_octagon.py

@@ -7,7 +7,7 @@ import random
 
 import pytest
 
-from freeroute.geometry import IntBox, IntPoint, ceil_sqrt2, overlaps_2d, segment_octagon
+from rpmroute.geometry import IntBox, IntPoint, ceil_sqrt2, overlaps_2d, segment_octagon
 
 
 @pytest.mark.parametrize("r", [0, 1, 2, 3, 1000, 2000, 3000, 12345, 999999])

tests/geometry/test_point_vector.py

@@ -8,7 +8,7 @@ Java ``long``, and rational equality.
 
 from __future__ import annotations
 
-from freeroute.geometry import (
+from rpmroute.geometry import (
     IntPoint,
     IntVector,
     RationalPoint,
@@ -139,7 +139,7 @@ def test_rational_point_infinite():
 
 
 def test_rational_point_contained_in_box_exact():
-    from freeroute.geometry import IntBox
+    from rpmroute.geometry import IntBox
 
     box = IntBox(0, 0, 2, 2)
     assert RationalPoint(3, 2, 2).is_contained_in(box)  # (1.5, 1.0) inside

tests/geometry/test_polygon.py

@@ -13,9 +13,9 @@ from __future__ import annotations
 
 import pytest
 
-from freeroute.geometry import IntPoint, Side
-from freeroute.geometry.polygon import Polygon
-from freeroute.geometry.polygon_shape import PolygonShape
+from rpmroute.geometry import IntPoint, Side
+from rpmroute.geometry.polygon import Polygon
+from rpmroute.geometry.polygon_shape import PolygonShape
 
 
 def pts(*coords):

tests/geometry/test_polyline.py

@@ -2,7 +2,7 @@
 
 from __future__ import annotations
 
-from freeroute.geometry import (
+from rpmroute.geometry import (
     IntBox,
     IntPoint,
     Polyline,

tests/geometry/test_simplex.py

@@ -16,7 +16,7 @@ Source: ``geometry/planar/{TileShape,Simplex}.java``.
 
 from __future__ import annotations
 
-from freeroute.geometry import IntBox, IntPoint, Line, Side, Simplex
+from rpmroute.geometry import IntBox, IntPoint, Line, Side, Simplex
 
 
 def _grid(lo: int, hi: int):
@@ -162,7 +162,7 @@ def test_get_instance_detects_empty_from_opposing_halfplanes():
 
 def test_translate_preserves_shape():
     tri = right_triangle()
-    from freeroute.geometry import IntVector
+    from rpmroute.geometry import IntVector
 
     moved = tri.translate_by(IntVector(100, 50))
     for p in _grid(-3, 13):

tests/oracle.py

@@ -1,8 +1,8 @@
 """FreeRouting JAR oracle for behaviour-level validation.
 
-**Dev/test only — not part of the shipped package** (freeroute is Java-free by
+**Dev/test only — not part of the shipped package** (rpmroute is Java-free by
 design). This runs the reference FreeRouting JAR to route a Specctra DSN so that
-freeroute's own output can be diffed against the reference implementation. There
+rpmroute's own output can be diffed against the reference implementation. There
 are no unit-test oracles for FreeRouting's geometry/router, so the oracle is how
 we validate at the behaviour level: same DSN in, compare routed connectivity.
 
@@ -10,7 +10,7 @@ Tests that use this skip automatically when a Java 21+ runtime or the JAR is not
 available (e.g. CI without a JVM), so the normal suite stays Java-free.
 
 Overrides:
-- ``FREEROUTE_ORACLE_JAVA`` — explicit path to a ``java`` binary.
+- ``RPMROUTE_ORACLE_JAVA`` (or the older ``FREEROUTE_ORACLE_JAVA``) — explicit path to a ``java`` binary.
 - ``FREEROUTING_JAR`` — explicit path to a freerouting JAR.
 """
 
@@ -27,7 +27,7 @@ import tempfile
 
 import pytest
 
-from freeroute.dsn.sexp import parse
+from rpmroute.dsn.sexp import parse
 
 _MIN_JAVA_MAJOR = 21
 _REPO_ROOT = Path(__file__).resolve().parents[1]
@@ -60,7 +60,7 @@ def _java_major(java: str) -> int:
 def find_java() -> str | None:
     """Return a path to a Java >= 21 runtime, or None."""
     candidates: list[str] = []
-    override = os.environ.get("FREEROUTE_ORACLE_JAVA")
+    override = os.environ.get("RPMROUTE_ORACLE_JAVA") or os.environ.get("FREEROUTE_ORACLE_JAVA")
     if override:
         candidates.append(override)
     java_home = os.environ.get("JAVA_HOME")

tests/route/test_axis_escapes.py

@@ -0,0 +1,113 @@
+"""Pins of a fine-pitch part turned off the grid axes leave along their pads.
+
+A QFN at 45 degrees has no straight exit: every horizontal or vertical step
+from a pin passes its neighbours closer than the clearance (0.35 mm away on
+each axis at 0.5 mm pitch). The grid leaves along the pad's own axis first,
+past the pin row, and the exact engine checks that slanted leg on its exact
+copper. Found on th-eda's lift ESC, where a QFN-24 at 45 degrees left 15
+connections unroutable on an empty board.
+"""
+
+from __future__ import annotations
+
+import math
+
+import pytest
+
+from rpmroute.board import build_board
+from rpmroute.dsn import parse_dsn
+from rpmroute.geometry import IntPoint, overlaps_2d, segment_slab
+from rpmroute.route.grid_router import GridRouter
+from rpmroute.route.pipeline import (
+    _rule_clearance_dsn,
+    _rule_width_dsn,
+    _via_half_board,
+    build_exact_routing_result,
+)
+
+
+def _qfn_side_dsn(rotation: float) -> str:
+    """Two rows of five 0.25 x 0.8 mm pads at 0.5 mm pitch (one side of a
+    QFN and its opposite side), turned by ``rotation``; each pin of the top
+    row is its own net, routed to a pad 4.5 mm out, the pads fanned 1.5 mm
+    apart."""
+    cx, cy = 100000, -100000
+    t = math.radians(rotation)
+    out = (-math.sin(t), math.cos(t))  # the pads' outward axis after turning
+    along = (math.cos(t), math.sin(t))  # the pin row
+    pins, targets, nets = [], [], []
+    for i in range(5):
+        x = -1000 + 500 * i
+        pins += [f"(pin P {i + 1} {x} 1000)", f"(pin P {i + 6} {x} -1000)"]
+        px = cx + x * math.cos(t) - 1000 * math.sin(t)
+        py = cy + x * math.sin(t) + 1000 * math.cos(t)
+        spread = 1500 * (i - 2) - x  # fan the far pads out to 1.5 mm apart
+        tx = px + 4500 * out[0] + spread * along[0]
+        ty = py + 4500 * out[1] + spread * along[1]
+        targets.append(f"(place T{i + 1} {round(tx)} {round(ty)} front 0)")
+        nets.append(f"(net N{i} (pins U1-{i + 1} T{i + 1}-1))")
+    return f"""(pcb qfn (parser) (resolution um 10) (unit um)
+  (structure
+    (layer F.Cu (type signal)) (layer B.Cu (type signal))
+    (boundary (path pcb 0  115000 -115000  85000 -115000  85000 -85000  115000 -85000
+      115000 -115000))
+    (via "Via[0-1]_450:200_um")
+    (rule (width 150) (clearance 150)))
+  (placement
+    (component Q (place U1 {cx} {cy} front {rotation}))
+    (component T {" ".join(targets)}))
+  (library
+    (image Q {" ".join(pins)})
+    (image T (pin t 1 0 0))
+    (padstack P (shape (rect F.Cu -125 -400 125 400)) (attach off))
+    (padstack t (shape (rect F.Cu -300 -300 300 300)) (attach off))
+    (padstack "Via[0-1]_450:200_um" (shape (circle F.Cu 450)) (shape (circle B.Cu 450))
+      (attach off)))
+  (network {" ".join(nets)}))"""
+
+
+@pytest.mark.parametrize("rotation", [45, 30, -45])
+def test_a_turned_fine_pitch_part_gets_its_pins_out(rotation):
+    result = build_exact_routing_result(parse_dsn(_qfn_side_dsn(rotation)), resolution=2, shove=True)
+    assert result.unrouted == []
+
+
+def test_the_exit_runs_along_the_pad_axis_and_clears_the_neighbours():
+    dsn = parse_dsn(_qfn_side_dsn(45))
+    s = dsn.resolution.value
+    board = build_board(dsn)
+    router = GridRouter(
+        board,
+        trace_width=round(_rule_width_dsn(dsn) * s),
+        clearance=round(_rule_clearance_dsn(dsn) * s),
+        via_half=_via_half_board(dsn, s),
+        orthogonal=True,
+    )
+    pins = {p.name: p for p in board.get_pins() if p.component_ref == "U1"}
+    pin = pins["3"]
+    exit_point = router._axis_exit(pin)
+    assert exit_point is not None
+    dx, dy = exit_point.x - pin.location.x, exit_point.y - pin.location.y
+    assert abs(abs(dx) - abs(dy)) <= 2  # along the 45-degree axis
+    leg = segment_slab(pin.location, exit_point, router.half_width + router.clearance)
+    for name in ("2", "4"):
+        assert not overlaps_2d(leg, pins[name].shape)
+
+
+def test_a_pad_on_the_grid_axes_keeps_the_usual_exits():
+    dsn = parse_dsn(_qfn_side_dsn(0))
+    s = dsn.resolution.value
+    board = build_board(dsn)
+    router = GridRouter(board, trace_width=round(_rule_width_dsn(dsn) * s),
+                        clearance=round(_rule_clearance_dsn(dsn) * s), via_half=_via_half_board(dsn, s))
+    pin = next(p for p in board.get_pins() if p.component_ref == "U1" and p.name == "3")
+    assert router._axis_exit(pin) is None
+
+
+def test_a_slanted_slab_is_tight_where_a_bounding_box_is_not():
+    slab = segment_slab(IntPoint(0, 0), IntPoint(10000, 10000), 750)
+    # a point beside the diagonal but inside its bounding box
+    from rpmroute.geometry import IntBox
+
+    assert not overlaps_2d(slab, IntBox(8000, 0, 8100, 100))
+    assert overlaps_2d(slab, IntBox(4900, 4900, 5100, 5100))

tests/route/test_diagonal.py

@@ -16,11 +16,11 @@ from pathlib import Path
 
 import pytest
 
-from freeroute.board import build_board
-from freeroute.dsn import parse_dsn
-from freeroute.dsn.sexp import parse
-from freeroute.geometry import IntBox, IntPoint, overlaps_2d, segment_octagon
-from freeroute.route import route, route_dsn_board_exact
+from rpmroute.board import build_board
+from rpmroute.dsn import parse_dsn
+from rpmroute.dsn.sexp import parse
+from rpmroute.geometry import IntBox, IntPoint, overlaps_2d, segment_octagon
+from rpmroute.route import route, route_dsn_board_exact
 
 FIXTURES = Path(__file__).resolve().parent.parent / "dsn" / "fixtures"
 DIAGONAL_WIN = FIXTURES / "diagonal_win.dsn"
@@ -55,7 +55,7 @@ def _pins_by_net(fixture):
 
 
 def _rule_clearance_board(fixture):
-    from freeroute.route.pipeline import _rule_clearance_dsn
+    from rpmroute.route.pipeline import _rule_clearance_dsn
 
     dsn = parse_dsn(fixture.read_text())
     return round(_rule_clearance_dsn(dsn) * max(dsn.resolution.value, 1))

tests/route/test_exact_router.py

@@ -15,12 +15,12 @@ import sys
 
 import pytest
 
-from freeroute.board import ShapeSearchTree, TreeShape, build_board
-from freeroute.dsn import parse_dsn
-from freeroute.dsn.sexp import parse
-from freeroute.geometry import IntBox, Polyline, PolylineShape
-from freeroute.route import route, route_dsn_board, route_dsn_board_exact
-from freeroute.route.pipeline import _rule_clearance_dsn, _rule_width_dsn
+from rpmroute.board import ShapeSearchTree, TreeShape, build_board
+from rpmroute.dsn import parse_dsn
+from rpmroute.dsn.sexp import parse
+from rpmroute.geometry import IntBox, Polyline, PolylineShape
+from rpmroute.route import route, route_dsn_board, route_dsn_board_exact
+from rpmroute.route.pipeline import _rule_clearance_dsn, _rule_width_dsn
 
 sys.path.insert(0, str(Path(__file__).resolve().parent.parent))
 

tests/route/test_fixed_wiring.py

@@ -2,9 +2,9 @@
 
 from __future__ import annotations
 
-from freeroute.board import build_board
-from freeroute.dsn import parse_dsn
-from freeroute.route.pipeline import route_dsn_board_exact
+from rpmroute.board import build_board
+from rpmroute.dsn import parse_dsn
+from rpmroute.route.pipeline import route_dsn_board_exact
 
 _DSN = """(pcb wired (parser) (resolution um 10) (unit um)
   (structure
@@ -95,9 +95,9 @@ def test_a_fanned_out_signal_is_routed_from_its_via():
 
 def test_the_session_never_repeats_copper_already_on_the_board():
     # the JAR writes the DSN's wiring back into its session, and an applier
-    # then adds it a second time on top of itself; freeroute writes only
+    # then adds it a second time on top of itself; rpmroute writes only
     # what it routed
-    from freeroute.route.pipeline import build_exact_routing_result
+    from rpmroute.route.pipeline import build_exact_routing_result
 
     fixed_vias = {(5000.0, -11500.0), (10000.0, -11500.0)}
     fixed_paths = {(5000.0, -10000.0, 5000.0, -11500.0), (10000.0, -10000.0, 10000.0, -11500.0),

tests/route/test_grid_exact_agreement.py

@@ -12,11 +12,11 @@ import math
 
 import pytest
 
-from freeroute.board import build_board
-from freeroute.dsn import parse_dsn
-from freeroute.geometry import IntBox, Simplex
-from freeroute.route.grid_router import GridRouter
-from freeroute.route.pipeline import (
+from rpmroute.board import build_board
+from rpmroute.dsn import parse_dsn
+from rpmroute.geometry import IntBox, Simplex
+from rpmroute.route.grid_router import GridRouter
+from rpmroute.route.pipeline import (
     _rule_clearance_dsn,
     _rule_width_dsn,
     _via_half_board,
@@ -268,9 +268,9 @@ def test_a_via_by_a_chamfered_corner_is_judged_round():
     """The grid keeps a via's centre its radius plus the edge clearance from
     the outline. The exact check used the via's square, whose corner reaches
     past a 45-degree chamfer where the round via does not."""
-    from freeroute.board.outline import BoardOutline
-    from freeroute.geometry import IntBox, IntPoint
-    from freeroute.route.exact_router import _inside_outline
+    from rpmroute.board.outline import BoardOutline
+    from rpmroute.geometry import IntBox, IntPoint
+    from rpmroute.route.exact_router import _inside_outline
 
     # a 10 mm square with its lower-left corner cut at 45 degrees
     outline = BoardOutline([IntPoint(*p) for p in

tests/route/test_negotiate.py

@@ -6,10 +6,10 @@ from pathlib import Path
 
 import pytest
 
-from freeroute.board import build_board
-from freeroute.dsn import parse_dsn
-from freeroute.route.grid_router import GridRouter
-from freeroute.route.pipeline import _rule_clearance_dsn, _rule_width_dsn, route_dsn_board
+from rpmroute.board import build_board
+from rpmroute.dsn import parse_dsn
+from rpmroute.route.grid_router import GridRouter
+from rpmroute.route.pipeline import _rule_clearance_dsn, _rule_width_dsn, route_dsn_board
 
 FIXTURES = Path(__file__).resolve().parent.parent / "dsn" / "fixtures"
 

tests/route/test_net_widths.py

@@ -2,8 +2,8 @@
 
 from __future__ import annotations
 
-from freeroute.dsn import parse_dsn
-from freeroute.route.pipeline import build_exact_routing_result
+from rpmroute.dsn import parse_dsn
+from rpmroute.route.pipeline import build_exact_routing_result
 
 _BOARD = """(pcb widths (parser) (resolution um 10) (unit um)
   (structure

tests/route/test_orders.py

@@ -4,8 +4,8 @@ from __future__ import annotations
 
 from pathlib import Path
 
-from freeroute.cli import main
-from freeroute.route.orders import (
+from rpmroute.cli import main
+from rpmroute.route.orders import (
     best_of_orders,
     candidate_seeds,
     promote_failures,

tests/route/test_real_board_geometry.py

@@ -6,9 +6,9 @@ import math
 
 import pytest
 
-from freeroute.board import build_board
-from freeroute.dsn import parse_dsn
-from freeroute.route.pipeline import route_dsn_board_exact
+from rpmroute.board import build_board
+from rpmroute.dsn import parse_dsn
+from rpmroute.route.pipeline import route_dsn_board_exact
 
 # 20 x 20 mm board whose corners are rounded with a 3 mm radius, as polylines
 _R = 3000.0
@@ -70,7 +70,7 @@ def test_every_pin_of_a_half_millimetre_pitch_row_escapes(resolution):
 
 
 def test_resolution_one_has_no_halo_so_the_grid_is_unchanged():
-    from freeroute.route.grid_router import GridRouter
+    from rpmroute.route.grid_router import GridRouter
 
     board = build_board(parse_dsn(_dsn("", "")))
     assert GridRouter(board, trace_width=2500, clearance=1500)._halo_offsets == []
@@ -101,7 +101,7 @@ def test_heuristic_weight_bounds_route_length():
 
 # --- copper zones (DSN planes) -----------------------------------------------
 # rc4 power stage: pads inside "keep router off" pours connect through the pour,
-# and freeroute, not knowing zones, dropped every such connection.
+# and rpmroute, not knowing zones, dropped every such connection.
 
 _ZONE = "(plane N (polygon F.Cu 0  4000 -4000  10000 -4000  10000 -10000  4000 -10000  4000 -4000))"
 _NO_TRACKS = "(wire_keepout \"pour\" (polygon F.Cu 0  4000 -4000  10000 -4000  10000 -10000  4000 -10000))"
@@ -121,7 +121,7 @@ def test_planes_are_read_and_are_not_obstacles():
 
 
 def test_pads_in_one_zone_need_no_route_between_them():
-    from freeroute.route.grid_router import _connected_groups
+    from rpmroute.route.grid_router import _connected_groups
 
     board = build_board(_zone_board())
     pins = sorted(board.get_pins(), key=lambda p: p.component_ref)
@@ -155,7 +155,7 @@ def test_a_pour_other_nets_can_cross_is_not_trusted_to_connect():
 
 def test_cli_names_the_connections_it_could_not_route(tmp_path, capsys):
     # a keepout wall across the board on both layers: A and B cannot be joined
-    from freeroute.cli import main
+    from rpmroute.cli import main
 
     wall = " ".join(
         f"(keepout \"wall\" (polygon {layer} 0  9000 1000  11000 1000  11000 -21000  9000 -21000))"
@@ -218,7 +218,7 @@ def test_a_pad_outside_the_plane_routes_to_it():
 
 
 def test_a_through_hole_pad_inside_a_plane_needs_no_route():
-    from freeroute.route.grid_router import _connected_groups
+    from rpmroute.route.grid_router import _connected_groups
 
     board = build_board(parse_dsn(_four_layer_dsn()))
     plane = [z for z in board.get_conduction_areas() if z.name == "GND"]

tests/route/test_rollback.py

@@ -6,10 +6,10 @@ from pathlib import Path
 
 import pytest
 
-from freeroute.board import build_board
-from freeroute.dsn import parse_dsn
-from freeroute.route.grid_router import GridRouter
-from freeroute.route.pipeline import _rule_clearance_dsn, _rule_width_dsn, route_dsn_board
+from rpmroute.board import build_board
+from rpmroute.dsn import parse_dsn
+from rpmroute.route.grid_router import GridRouter
+from rpmroute.route.pipeline import _rule_clearance_dsn, _rule_width_dsn, route_dsn_board
 
 FIXTURES = Path(__file__).resolve().parent.parent / "dsn" / "fixtures"
 

tests/route/test_room_pack.py

@@ -23,11 +23,11 @@ from pathlib import Path
 
 import pytest
 
-from freeroute.dsn import parse_dsn
-from freeroute.dsn.sexp import parse
-from freeroute.geometry import Polyline, PolylineShape
-from freeroute.route import route, route_dsn_board_rooms
-from freeroute.route.pipeline import _rule_clearance_dsn
+from rpmroute.dsn import parse_dsn
+from rpmroute.dsn.sexp import parse
+from rpmroute.geometry import Polyline, PolylineShape
+from rpmroute.route import route, route_dsn_board_rooms
+from rpmroute.route.pipeline import _rule_clearance_dsn
 
 FIXTURES = Path(__file__).resolve().parent.parent / "dsn" / "fixtures"
 CHANNEL_PACK = FIXTURES / "channel_pack.dsn"
@@ -134,7 +134,7 @@ def test_channel_pack_is_deterministic():
 def test_channel_pack_endpoints_stay_on_pads():
     dsn = parse_dsn(CHANNEL_PACK.read_text())
     board_pins: dict[int, set[tuple[int, int]]] = {}
-    from freeroute.board import build_board
+    from rpmroute.board import build_board
 
     for pin in build_board(dsn).get_pins():
         for net_no in pin.net_nos:

tests/route/test_room_router.py

@@ -13,11 +13,11 @@ import sys
 
 import pytest
 
-from freeroute.board import build_board
-from freeroute.dsn import parse_dsn
-from freeroute.dsn.sexp import parse
-from freeroute.geometry import Polyline
-from freeroute.route import route, route_dsn_board_exact, route_dsn_board_rooms
+from rpmroute.board import build_board
+from rpmroute.dsn import parse_dsn
+from rpmroute.dsn.sexp import parse
+from rpmroute.geometry import Polyline
+from rpmroute.route import route, route_dsn_board_exact, route_dsn_board_rooms
 
 sys.path.insert(0, str(Path(__file__).resolve().parent.parent))
 
@@ -31,7 +31,7 @@ WIDE_DOOR = FIXTURES / "rooms_wide_door.dsn"
 
 
 def _clearance(dsn, scale):
-    from freeroute.route.pipeline import _rule_clearance_dsn
+    from rpmroute.route.pipeline import _rule_clearance_dsn
 
     return round(_rule_clearance_dsn(dsn) * scale)
 

tests/route/test_room_shove.py

@@ -32,12 +32,12 @@ import sys
 
 import pytest
 
-from freeroute.board import build_board
-from freeroute.dsn import parse_dsn
-from freeroute.dsn.sexp import parse
-from freeroute.geometry import IntBox, IntPoint, Polyline, PolylineShape
-from freeroute.route import route, route_dsn_board_exact, route_dsn_board_rooms
-from freeroute.route.pipeline import _rule_clearance_dsn
+from rpmroute.board import build_board
+from rpmroute.dsn import parse_dsn
+from rpmroute.dsn.sexp import parse
+from rpmroute.geometry import IntBox, IntPoint, Polyline, PolylineShape
+from rpmroute.route import route, route_dsn_board_exact, route_dsn_board_rooms
+from rpmroute.route.pipeline import _rule_clearance_dsn
 
 
 def _emitted_drc_violations(result, clearance):
@@ -265,8 +265,8 @@ def test_shove_is_byte_identical_on_foundation_fixtures(fixture):
 
 
 def test_project_gate_reduces_to_clamp_without_occupancy():
-    from freeroute.board.search_tree import ShapeSearchTree
-    from freeroute.route.room_router import _Door, _edge_gate, _project_gate
+    from rpmroute.board.search_tree import ShapeSearchTree
+    from rpmroute.route.room_router import _Door, _edge_gate, _project_gate
 
     door = _Door(other=1, kind="edge", lo=IntPoint(0, 100), hi=IntPoint(200, 100))
     tree = ShapeSearchTree()
@@ -277,8 +277,8 @@ def test_project_gate_reduces_to_clamp_without_occupancy():
 
 
 def test_project_gate_avoids_other_net_copper_on_the_door():
-    from freeroute.board.search_tree import ShapeSearchTree, TreeShape
-    from freeroute.route.room_router import _Door, _project_gate
+    from rpmroute.board.search_tree import ShapeSearchTree, TreeShape
+    from rpmroute.route.room_router import _Door, _project_gate
 
     door = _Door(other=1, kind="edge", lo=IntPoint(0, 100), hi=IntPoint(200, 100))
     tree = ShapeSearchTree()
@@ -293,7 +293,7 @@ def test_project_gate_avoids_other_net_copper_on_the_door():
 
 
 def test_free_intervals_splits_around_forbidden_band():
-    from freeroute.route.room_router import _best_free_point, _free_intervals
+    from rpmroute.route.room_router import _best_free_point, _free_intervals
 
     free = _free_intervals(0, 200, [(87, 113)])
     assert free == [(0, 87), (113, 200)]

tests/route/test_router.py

@@ -16,11 +16,11 @@ import sys
 
 import pytest
 
-from freeroute.board import build_board
-from freeroute.dsn import parse_dsn
-from freeroute.dsn.sexp import parse
-from freeroute.route import route, route_dsn_board
-from freeroute.ses.writer import ses_scale
+from rpmroute.board import build_board
+from rpmroute.dsn import parse_dsn
+from rpmroute.dsn.sexp import parse
+from rpmroute.route import route, route_dsn_board
+from rpmroute.ses.writer import ses_scale
 
 sys.path.insert(0, str(Path(__file__).resolve().parent.parent))
 
@@ -287,11 +287,11 @@ def test_connectivity_parity_on_congested_board():
     if not HAS_ORACLE:
         pytest.skip("FreeRouting oracle unavailable")
     our_nets = routed_net_set(route(RIPUP.read_text()))
-    assert our_nets == {"NET_A", "NET_B"}  # freeroute connects both via rip-up
+    assert our_nets == {"NET_A", "NET_B"}  # rpmroute connects both via rip-up
     oracle_nets = routed_net_set(route_dsn(RIPUP, max_passes=3, timeout=300))
     if not oracle_nets:
         # the reference JAR does not route this synthetic single-signal-layer
-        # board (it expects a routing/via layer); freeroute's rip-up connecting
+        # board (it expects a routing/via layer); rpmroute's rip-up connecting
         # both nets is already asserted above and by the fast tests.
         pytest.skip("reference JAR routed nothing on the synthetic single-layer board")
     assert oracle_nets <= our_nets  # rip-up matches the JAR's connectivity
@@ -306,7 +306,7 @@ def test_connectivity_parity_on_crossing_board():
     our_nets = routed_net_set(route(CROSSING.read_text()))
     oracle_nets = routed_net_set(route_dsn(CROSSING, max_passes=3, timeout=300))
     assert oracle_nets, "oracle routed nothing on a routable board"
-    assert oracle_nets <= our_nets  # freeroute connects every net the JAR does
+    assert oracle_nets <= our_nets  # rpmroute connects every net the JAR does
 
 
 @pytest.mark.oracle

tests/route/test_shove.py

@@ -17,10 +17,10 @@ import sys
 
 import pytest
 
-from freeroute.dsn import parse_dsn
-from freeroute.dsn.sexp import parse
-from freeroute.route import route, route_dsn_board_exact
-from freeroute.route.pipeline import _rule_clearance_dsn
+from rpmroute.dsn import parse_dsn
+from rpmroute.dsn.sexp import parse
+from rpmroute.route import route, route_dsn_board_exact
+from rpmroute.route.pipeline import _rule_clearance_dsn
 
 sys.path.insert(0, str(Path(__file__).resolve().parent.parent))
 
@@ -66,7 +66,7 @@ def test_shove_result_is_deterministic():
 
 
 def test_shoved_trace_endpoints_still_on_pads():
-    from freeroute.board import build_board
+    from rpmroute.board import build_board
 
     on, _, _ = route_dsn_board_exact(parse_dsn(SHOVE.read_text()), rip_up=False, shove=True)
     board = build_board(parse_dsn(SHOVE.read_text()))

tests/route/test_straight_pin_exits.py

@@ -8,12 +8,12 @@ from __future__ import annotations
 
 import pytest
 
-from freeroute.board import build_board
-from freeroute.board.items import Pin
-from freeroute.dsn import parse_dsn
-from freeroute.geometry import IntPoint
-from freeroute.route.grid_router import GridRouter
-from freeroute.route.pipeline import route_dsn_board_exact
+from rpmroute.board import build_board
+from rpmroute.board.items import Pin
+from rpmroute.dsn import parse_dsn
+from rpmroute.geometry import IntPoint
+from rpmroute.route.grid_router import GridRouter
+from rpmroute.route.pipeline import route_dsn_board_exact
 
 
 def _row(x0: int, pins: int = 6, skew: int = 3000) -> str:

tests/route/test_tree_nets.py

@@ -0,0 +1,170 @@
+"""Multi-pin nets: spanning-tree pairs, and connections that end on copper
+their net has already routed (a T into the tree)."""
+
+from __future__ import annotations
+
+import pytest
+
+from rpmroute.board import build_board
+from rpmroute.dsn import parse_dsn
+from rpmroute.route import exact_router
+from rpmroute.route.grid_router import GridRouter, RouteResult
+from rpmroute.route.pipeline import _rule_clearance_dsn, _rule_width_dsn
+
+# P1 and P2 are nearest each other, so the tree pairs them first; P3 sits
+# under the middle of that leg, 50 mm below it and 90 mm from either pin.
+TEE = """(pcb "tee.dsn"
+  (parser (string_quote ") (space_in_quoted_tokens on) (host_cad "t") (host_version "1"))
+  (resolution um 10)
+  (unit um)
+  (structure
+    (layer F.Cu (type signal) (property (index 0)))
+    (boundary (path pcb 0  0 0  200000 0  200000 -100000  0 -100000  0 0))
+    (rule (width 2000) (clearance 2000))
+  )
+  (library
+    (padstack Rect_Pad (shape (rect F.Cu -1000 -1000 1000 1000)) (attach off))
+    (image PAD (pin Rect_Pad 1 0 0))
+  )
+  (placement
+    (component PAD
+      (place P1 60000 -20000 front 0)
+      (place P2 140000 -20000 front 0)
+      (place P3 100000 -70000 front 0)
+    )
+  )
+  (network
+    (net N (pins P1-1 P2-1 P3-1))
+    (class default (rule (width 2000) (clearance 2000)))
+  )
+  (wiring)
+)
+"""
+
+
+def _router(tree_nets=True, text=TEE):
+    dsn = parse_dsn(text)
+    s = dsn.resolution.value
+    return GridRouter(
+        build_board(dsn),
+        trace_width=round(_rule_width_dsn(dsn) * s),
+        clearance=round(_rule_clearance_dsn(dsn) * s),
+        orthogonal=True,
+        tree_nets=tree_nets,
+    )
+
+
+def test_pairs_follow_a_spanning_tree_not_the_pin_order():
+    router = _router()
+    conns = router._build_connections()
+    pairs = [(c.a.component_ref, c.b.component_ref) for c in conns]
+    assert pairs == [("P1", "P2"), ("P1", "P3")]
+    chain = _router(tree_nets=False)._build_connections()
+    assert [(c.a.component_ref, c.b.component_ref) for c in chain] == [("P1", "P2"), ("P2", "P3")]
+
+
+def test_the_third_pin_tees_into_the_first_leg():
+    router = _router()
+    result = router.route()
+    first, second = router._conns
+    assert result.unrouted == 0
+    # the second connection starts on the first one's copper, mid-leg
+    start = second.path[0]
+    assert start in first.copper and second.a_end is None
+    assert second.anchors == {first.index}
+    assert router._dependents[first.index] == {second.index}
+    assert abs(router._cell_center(start[:2]).x - 1_000_000) <= router.step
+    # and so its copper is the 50 mm drop, not 90 mm back to a pin
+    assert len(second.path) < len(router._conns[0].path)
+
+
+def test_without_trees_each_connection_ends_on_a_pin():
+    router = _router(tree_nets=False)
+    router.route()
+    assert all(c.anchors == frozenset() for c in router._conns)
+    assert all(c.a_end is not None and c.b_end is not None for c in router._conns)
+
+
+def test_ripping_an_anchor_takes_what_hangs_on_it():
+    router = _router()
+    router.route()
+    first, second = router._conns
+    victims = router._with_dependents([first], router._conns)
+    assert victims == [first, second]  # anchors first, as committed
+    for victim in victims:
+        router._rip(victim)
+    assert not first.routed and not second.routed
+    assert not router._dependents.get(first.index)
+    assert not router._cell_owner
+
+
+def test_the_snapshot_lists_anchors_before_what_hangs_on_them():
+    router = _router()
+    result = router.route()
+    assert result.connection_anchors == [(), (0,)]
+
+
+def test_the_exact_engine_drops_a_tee_whose_anchor_it_rejects(monkeypatch):
+    """A connection teed onto copper the exact check refuses would dangle."""
+    dsn = parse_dsn(TEE)
+    board = build_board(dsn)
+    real = exact_router.route_board
+
+    def grid_then_spoil(*args, **kwargs):
+        result: RouteResult = real(*args, **kwargs)
+        assert result.connection_anchors == [(), (0,)]
+        # move the first leg off the board edge so the exact check rejects it
+        net, wires, vias = result.connections[0]
+        result.connections[0] = (net, [(layer, [type(p)(p.x, p.y + 2_000_000) for p in pts])
+                                       for layer, pts in wires], vias)
+        return result
+
+    monkeypatch.setattr(exact_router, "route_board", grid_then_spoil)
+    s = dsn.resolution.value
+    exact = exact_router.route_board_exact(
+        board,
+        trace_width=round(_rule_width_dsn(dsn) * s),
+        clearance=round(_rule_clearance_dsn(dsn) * s),
+    )
+    assert len(exact.result.failed) == 2  # the leg and the T hanging on it
+    assert not exact.result.wires
+
+
+@pytest.mark.parametrize("tree_nets", [True, False])
+def test_occupancy_stays_honest(tree_nets):
+    router = _router(tree_nets)
+    router.route()
+    conns = router._conns
+    assert all(conns[i].routed for i in router._cell_owner.values())
+    for anchor, hanging in router._dependents.items():
+        for i in hanging:
+            assert conns[i].routed and conns[anchor].routed
+
+
+# P1-P2 along the top, P3 far off to the lower right, P4 just under the
+# middle of the P1-P2 leg.
+CHAIN_TEE = TEE.replace(
+    """      (place P3 100000 -70000 front 0)
+""",
+    """      (place P3 190000 -90000 front 0)
+      (place P4 100000 -40000 front 0)
+""",
+).replace("(pins P1-1 P2-1 P3-1)", "(pins P1-1 P2-1 P3-1 P4-1)")
+
+
+def test_a_tee_depends_on_every_connection_back_to_its_group():
+    """Joined as P1-P2, P2-P3, P3-P4, P4's connection tees onto P1-P2 copper,
+    which reaches P3's group only through P2-P3. Ripping P2-P3 must take the T
+    too, or it would be counted routed while cut off from P3."""
+    router = _router(text=CHAIN_TEE)
+    conns = router._conns = router._build_connections()
+    groups = {c.a.component_ref: c.a_group for c in conns}
+    groups.update({c.b.component_ref: c.b_group for c in conns})
+    for conn, (a, b) in zip(conns, (("P1", "P2"), ("P2", "P3"), ("P3", "P4")), strict=True):
+        conn.a_group, conn.b_group = groups[a], groups[b]
+    for conn in conns:
+        assert router._try_route(conn, conns)
+    first, second, third = conns
+    assert third.path[0] in first.copper  # the T lands on the far leg
+    assert third.anchors == {first.index, second.index}
+    assert router._with_dependents([second], conns) == [second, third]

tests/route/test_via_spacing.py

@@ -5,8 +5,8 @@ from __future__ import annotations
 import itertools
 import math
 
-from freeroute.dsn import parse_dsn
-from freeroute.route.pipeline import route_dsn_board_exact
+from rpmroute.dsn import parse_dsn
+from rpmroute.route.pipeline import route_dsn_board_exact
 
 # four GND pads 0.5 mm apart over a GND plane: each drops a via to the plane
 _DSN = """(pcb holes (parser) (resolution um 10) (unit um)
@@ -57,9 +57,9 @@ def test_connections_sharing_a_plane_via_write_it_once():
 
 
 def _router(dsn_text, via_drill_um=300):
-    from freeroute.board import build_board
-    from freeroute.route.grid_router import GridRouter
-    from freeroute.route.pipeline import _rule_clearance_dsn, _rule_width_dsn
+    from rpmroute.board import build_board
+    from rpmroute.route.grid_router import GridRouter
+    from rpmroute.route.pipeline import _rule_clearance_dsn, _rule_width_dsn
 
     dsn = parse_dsn(dsn_text)
     s = dsn.resolution.value
@@ -90,7 +90,7 @@ def test_no_via_goes_near_a_through_hole_pads_hole_even_of_its_own_net():
 
 
 def test_a_via_in_a_pad_keeps_hole_spacing_from_a_fixed_via():
-    from freeroute.geometry import IntPoint
+    from rpmroute.geometry import IntPoint
 
     text = _THT.replace("(network (net SIG (pins J1-1))))",
                         "(network (net SIG (pins J1-1)))\n"

tests/route/test_window_reroute.py

@@ -0,0 +1,128 @@
+"""Window re-route: a finer grid around a stuck connection, kept only when
+it leaves fewer connections unrouted."""
+
+from __future__ import annotations
+
+from rpmroute.board import build_board
+from rpmroute.dsn import parse_dsn
+from rpmroute.geometry import IntBox
+from rpmroute.route.grid_router import GridRouter
+from rpmroute.route.pipeline import _rule_clearance_dsn, _rule_width_dsn, route_dsn_board_exact
+
+
+def _slot(gap: int = 640, far: bool = False) -> str:
+    """A wall across the board with a slot in it. A trace fits the slot
+    only along a narrow band of heights that the board's 1x grid has no row
+    in and a 4x grid does. ``far`` adds a second net nowhere near the wall."""
+    yc = -5000
+    lo, hi = yc - gap // 2, yc + gap // 2
+    extra_place = "(place Q1 2000 -1000 front 0) (place Q2 6000 -1000 front 0)" if far else ""
+    extra_net = "(net M (pins Q1-1 Q2-1))" if far else ""
+    return f"""(pcb "slot.dsn"
+  (parser (string_quote ") (space_in_quoted_tokens on) (host_cad "t") (host_version "1"))
+  (resolution um 10)
+  (unit um)
+  (structure
+    (layer F.Cu (type signal) (property (index 0)))
+    (boundary (path pcb 0  0 0  20000 0  20000 -10000  0 -10000  0 0))
+    (keepout "" (rect F.Cu 9000 -10000 11000 {lo}))
+    (keepout "" (rect F.Cu 9000 {hi} 11000 0))
+    (rule (width 200) (clearance 200))
+  )
+  (library
+    (padstack Rect_Pad (shape (rect F.Cu -100 -100 100 100)) (attach off))
+    (image PAD (pin Rect_Pad 1 0 0))
+  )
+  (placement
+    (component PAD
+      (place P1 3000 {yc} front 0)
+      (place P2 17000 {yc} front 0)
+      {extra_place}
+    )
+  )
+  (network
+    (net N (pins P1-1 P2-1))
+    {extra_net}
+    (class default (rule (width 200) (clearance 200)))
+  )
+  (wiring)
+)
+"""
+
+
+def _route(text: str, rounds: int, **window):
+    exact, _scale, _layers = route_dsn_board_exact(
+        parse_dsn(text), resolution=1, window_reroute=rounds, window_resolution=4, **window,
+    )
+    return exact.result
+
+
+def test_the_board_grid_misses_the_slot_and_a_finer_window_finds_it():
+    plain = _route(_slot(), 0)
+    assert len(plain.failed) == 1
+    windowed = _route(_slot(), 1)
+    assert windowed.failed == []
+    assert windowed.wires  # and the copper it found is in the result
+
+
+def test_a_window_that_cannot_help_leaves_the_board_as_it_was():
+    plain = _route(_slot(gap=500, far=True), 0)  # too narrow for any grid
+    windowed = _route(_slot(gap=500, far=True), 2)
+    assert len(windowed.failed) == len(plain.failed) == 1
+    assert windowed.wires == plain.wires
+    assert windowed.vias == plain.vias
+
+
+def test_copper_outside_the_window_is_kept_as_it_was():
+    plain = _route(_slot(far=True), 0)
+    windowed = _route(_slot(far=True), 1)
+    assert windowed.failed == []
+    far_net = 2  # M, the second net in the DSN
+    assert windowed.wires[far_net] == plain.wires[far_net]
+
+
+def test_a_router_limited_to_some_nets_and_a_box_builds_only_those():
+    dsn = parse_dsn(_slot(far=True))
+    s = dsn.resolution.value
+    board = build_board(dsn)
+    whole = GridRouter(board, trace_width=round(_rule_width_dsn(dsn) * s),
+                       clearance=round(_rule_clearance_dsn(dsn) * s), orthogonal=True)
+    part = GridRouter(board, trace_width=round(_rule_width_dsn(dsn) * s),
+                      clearance=round(_rule_clearance_dsn(dsn) * s), orthogonal=True,
+                      only_nets=frozenset({2}), bounds=IntBox(0, -20000, 80000, 0))
+    assert {c.net_no for c in whole._build_connections()} == {1, 2}
+    assert {c.net_no for c in part._build_connections()} == {2}
+    assert part.cols * part.rows < whole.cols * whole.rows
+
+
+def test_a_spent_budget_starts_no_window():
+    assert len(_route(_slot(), 1, window_budget=0.0).failed) == 1
+    assert _route(_slot(), 1, window_budget=1000.0).failed == []
+
+
+def test_window_board_keeps_far_items_of_the_rerouted_nets_only():
+    from rpmroute.route.window import _item_box, _window_board
+
+    board = build_board(parse_dsn(_slot(far=True)))
+    items = [(item, _item_box(item)) for item in board.get_items()]
+    view = IntBox(80000, -60000, 120000, -40000)  # around the slot, far from Q1/Q2
+    sub = _window_board(board, items, view, {1}, {}, set(), {}, 100, 300, 300, [0], "via")
+    refs = {p.component_ref for p in sub.get_pins()}
+    assert {"P1", "P2"} <= refs  # net N's pins, though outside the view
+    assert not refs & {"Q1", "Q2"}  # net M's, far away, left out
+
+
+def test_a_connection_ending_outside_the_window_gets_no_copper():
+    """Its far end has no grid cells; a stub out to it would cross items the
+    window board never saw."""
+    from rpmroute.route.exact_router import route_board_exact
+
+    dsn = parse_dsn(_slot(far=True))
+    s = dsn.resolution.value
+    window = IntBox(70000, -70000, 130000, -30000)  # the slot only; net M's pins are far off
+    result = route_board_exact(
+        build_board(dsn), trace_width=round(_rule_width_dsn(dsn) * s),
+        clearance=round(_rule_clearance_dsn(dsn) * s), only_nets=frozenset({2}), bounds=window,
+    ).result
+    assert [f[0] for f in result.failed] == [2]
+    assert not result.wires.get(2) and not result.vias.get(2)

tests/ses/test_indent.py

@@ -2,7 +2,7 @@
 
 from __future__ import annotations
 
-from freeroute.ses.indent import Identifier, IndentWriter
+from rpmroute.ses.indent import Identifier, IndentWriter
 
 
 def test_nested_scopes_indent_by_two_spaces():

tests/ses/test_writer.py

@@ -1,7 +1,7 @@
 """End-to-end tests for the SES writer.
 
 Where possible these re-parse the emitted SES with the project's own tokenizer /
-S-expression parser (:mod:`freeroute.dsn.sexp`) and assert structural
+S-expression parser (:mod:`rpmroute.dsn.sexp`) and assert structural
 invariants, mirroring what FreeRouting's ``SesReader`` and ``kicad-cli pcb
 import specctra-ses`` walk: ``session > routes > network_out > net >
 wire(path)/via``.
@@ -13,9 +13,9 @@ from pathlib import Path
 
 import pytest
 
-from freeroute.dsn import parse_dsn
-from freeroute.dsn.sexp import SExp, parse
-from freeroute.ses import RoutedVia, RoutedWire, RoutingResult, write_ses
+from rpmroute.dsn import parse_dsn
+from rpmroute.dsn.sexp import SExp, parse
+from rpmroute.ses import RoutedVia, RoutedWire, RoutingResult, write_ses
 
 FIXTURES = Path(__file__).parent.parent / "dsn" / "fixtures"
 
@@ -142,7 +142,7 @@ def test_round_trip_from_empty_board_fixture():
 
 # --- SES coordinate units ---------------------------------------------------
 # FreeRouting's SesWriter writes coordinates in resolution units, and KiCad's
-# importer and mckicad's ses_apply read them that way. On 2026-09-26 freeroute
+# importer and mckicad's ses_apply read them that way. On 2026-09-26 rpmroute
 # was found writing DSN units instead, so every routed board came back 10x small.
 
 
@@ -155,8 +155,8 @@ def test_round_trip_from_empty_board_fixture():
     ],
 )
 def test_ses_scale(resolution, unit, expected):
-    from freeroute.dsn import parse_dsn
-    from freeroute.ses.writer import ses_scale
+    from rpmroute.dsn import parse_dsn
+    from rpmroute.ses.writer import ses_scale
 
     dsn = parse_dsn(f"(pcb t (parser) {resolution} {unit} (structure) (placement) (library) (network))")
     assert ses_scale(dsn) == pytest.approx(expected)

tests/test_cli.py

@@ -1,4 +1,4 @@
-"""Tests for the freeroute CLI (Specctra DSN in, SES out).
+"""Tests for the rpmroute CLI (Specctra DSN in, SES out).
 
 Covers the engine selection contract: every engine must route a fixture from the
 command line, and every option the selected engine does not implement must fail
@@ -11,7 +11,7 @@ from pathlib import Path
 
 import pytest
 
-from freeroute.cli import ENGINE_OPTIONS, main
+from rpmroute.cli import ENGINE_OPTIONS, main
 
 FIXTURES = Path(__file__).parent / "dsn" / "fixtures"
 FIXTURE = FIXTURES / "simple_2net.dsn"
@@ -71,13 +71,25 @@ def test_cli_every_engine_routes_a_fixture(engine, tmp_path):
     assert "(wire" in text
 
 
-def test_cli_default_engine_is_grid(tmp_path):
-    """The default must stay grid — the drop-in JAR replacement behaviour."""
+def test_cli_default_engine_is_exact(tmp_path):
+    """The default is the engine that checks its copper: grid output can short
+    and say nothing (a user routing with no flags shipped 15 crossings)."""
     default = tmp_path / "default.ses"
-    grid = tmp_path / "grid.ses"
+    exact = tmp_path / "exact.ses"
     assert main([str(FIXTURE), "-do", str(default)]) == 0
-    assert main([str(FIXTURE), "--engine", "grid", "-do", str(grid)]) == 0
-    assert default.read_text() == grid.read_text()
+    assert main([str(FIXTURE), "--engine", "exact", "-do", str(exact)]) == 0
+    assert default.read_text() == exact.read_text()
+
+
+@pytest.mark.parametrize("engine", ["grid", "room"])
+def test_unchecked_engines_say_so(tmp_path, capsys, engine):
+    assert main([str(FIXTURE), "--engine", engine, "-do", str(tmp_path / "out.ses")]) == 0
+    assert "does not check its copper" in capsys.readouterr().err
+
+
+def test_the_exact_engine_does_not_warn(tmp_path, capsys):
+    assert main([str(FIXTURE), "-do", str(tmp_path / "out.ses")]) == 0
+    assert "WARNING" not in capsys.readouterr().err
 
 
 def test_cli_room_pack_routes(tmp_path):
@@ -160,6 +172,8 @@ def test_cli_supported_combinations_are_accepted(tmp_path):
         "access": ["--access-cost", "5"],
         "negotiate": ["--negotiate", "2"],
         "rollback": ["--no-rollback"],
+        "tree": ["--no-tree"],
+        "window": ["--window-reroute", "1"],
     }
     for engine, options in ENGINE_OPTIONS.items():
         for option in options:

uv.lock

@@ -126,27 +126,6 @@ wheels = [
     { url = "https://files.pythonhosted.org/packages/8a/0e/97c33bf5009bdbac74fd2beace167cab3f978feb69cc36f1ef79360d6c4e/exceptiongroup-1.3.1-py3-none-any.whl", hash = "sha256:a7a39a3bd276781e98394987d3a5701d0c4edffb633bb7a5144577f82c773598", size = 16740, upload-time = "2025-11-21T23:01:53.443Z" },
 ]
 
-[[package]]
-name = "freeroute"
-version = "2026.7.14"
-source = { editable = "." }
-
-[package.dev-dependencies]
-dev = [
-    { name = "pytest" },
-    { name = "pytest-cov" },
-    { name = "ruff" },
-]
-
-[package.metadata]
-
-[package.metadata.requires-dev]
-dev = [
-    { name = "pytest", specifier = ">=7.0.0" },
-    { name = "pytest-cov", specifier = ">=4.0.0" },
-    { name = "ruff", specifier = ">=0.1.0" },
-]
-
 [[package]]
 name = "iniconfig"
 version = "2.3.0"
@@ -215,6 +194,27 @@ wheels = [
     { url = "https://files.pythonhosted.org/packages/9d/7a/d968e294073affff457b041c2be9868a40c1c71f4a35fcc1e45e5493067b/pytest_cov-7.1.0-py3-none-any.whl", hash = "sha256:a0461110b7865f9a271aa1b51e516c9a95de9d696734a2f71e3e78f46e1d4678", size = 22876, upload-time = "2026-03-21T20:11:14.438Z" },
 ]
 
+[[package]]
+name = "rpmroute"
+version = "2026.10.7"
+source = { editable = "." }
+
+[package.dev-dependencies]
+dev = [
+    { name = "pytest" },
+    { name = "pytest-cov" },
+    { name = "ruff" },
+]
+
+[package.metadata]
+
+[package.metadata.requires-dev]
+dev = [
+    { name = "pytest", specifier = ">=7.0.0" },
+    { name = "pytest-cov", specifier = ">=4.0.0" },
+    { name = "ruff", specifier = ">=0.1.0" },
+]
+
 [[package]]
 name = "ruff"
 version = "0.15.21"