Measured against KiCad's own pads on the TerraHawk rc4 power stage:
- Back-side parts kept their pads on F.Cu (32 pads). Mirror the copper
layer for a back-side part.
- Pad outlines were copied unrotated (29 pads on rotated parts). Place the
outline through the same chain as the pin: pin rotation, back-side
mirror, part rotation. Oval pads, a path with a width, came out as a
zero-height sliver; pad them out by the aperture.
- Multi-shape padstacks used the first shape; use the largest.
- Footprint-level keepouts were parsed but never placed. KiCad exports a
mounting hole's plated ring that way, so the router could not see it.
- Vias were sized like a trace (0.25 mm square for a 0.6 mm via), and every
remaining short and clearance error was a via. Read the size from the
DSN's via padstack and use it in all three engines; the grid engine now
reserves the cells a via's copper reaches.
With these the exact and room engines route that board with no shorts,
clearance or other DRC errors. Pins now carry their component reference.
rsp2k
f1df60fc31