Firmware v3.02.0 adds three new vendor commands:
- 0xB7 SIGNAL_MONITOR: fast 8-byte combined signal read
- 0xB8 TUNE_MONITOR: tune + dwell + read in one round-trip
- 0xB9 MULTI_REG_READ: batch read up to 64 indirect registers
New tools/skywalker.py provides five modes that use the BCM4500's
AGC registers as a crude power detector across 950-2150 MHz IF,
even without demodulator lock:
- spectrum: sweep analyzer with ASCII/waterfall/matplotlib display
- scan: automated transponder scanner (sweep + peak detect + blind scan)
- monitor: real-time signal strength for dish alignment
- lband: direct input analyzer with L-band allocation annotations
- track: carrier/beacon tracker with CSV/JSON logging and drift detection
Extracts shared SkyWalker1 class and constants into skywalker_lib.py;
tune.py now imports from the shared library.
New tools:
- tools/eeprom_write.py: EEPROM firmware flash with backup, verify, dry-run
- tools/ts_analyze.py: MPEG-2 transport stream analyzer with PAT/PMT parsing
DVB-S2 investigation confirms BCM4500 hardware limitation (no LDPC/BCH silicon).
Fix --json flag on tune.py subcommands (argparse parent/child scoping).
All tools verified against live SkyWalker-1 hardware.
Python tool (tools/tune.py) implements all vendor USB control
commands for tuning, LNB control, DiSEqC switching, and MPEG-2
transport stream capture via pyusb. Includes CLI subcommands for
status, tune, stream, diseqc, and lnb operations.
Consolidated hardware reference merges all Phase 1 analysis into
a single 12-section document covering the complete USB interface,
all 30 vendor commands, BCM4500 demodulator protocol, GPIF
streaming path, DiSEqC timing, and cross-version firmware
comparison.
