Ryan Malloy 7223fcf810 Add Hamilton adversarial test suite for firmware safety validation ...

55-test suite covering operator error, invalid inputs, state machine
violations, boundary conditions, and rapid-fire stress. Verifies all
Phase E safety fixes (timeout protection, watchdog, error propagation,
DiSEqC rejection) survive malformed commands without hanging or
corrupting device state.

2026-02-17 13:46:14 -07:00

..

carrier_catalog.py

Add DiSEqC motor control, QO-100 DATV reception, and carrier survey

2026-02-15 17:01:11 -07:00

eeprom_dump.py

Extract real FX2 firmware from I2C EEPROM

2026-02-11 05:08:20 -07:00

eeprom_probe.py

Extract real FX2 firmware from I2C EEPROM

2026-02-11 05:08:20 -07:00

eeprom_write.py

Add EEPROM flash tool, TS analyzer, DVB-S2 investigation, and tune.py bugfix

2026-02-11 14:46:20 -07:00

fw_dump.py

Add FX2 firmware dumps and USB probe tool

2026-02-11 04:51:34 -07:00

fw_load.py

Add custom FX2 firmware and RAM loader for open-source development

2026-02-11 19:46:50 -07:00

motor.py

Add DiSEqC motor control, QO-100 DATV reception, and carrier survey

2026-02-15 17:01:11 -07:00

qo100.py

Add DiSEqC motor control, QO-100 DATV reception, and carrier survey

2026-02-15 17:01:11 -07:00

signal_analysis.py

Add DiSEqC motor control, QO-100 DATV reception, and carrier survey

2026-02-15 17:01:11 -07:00

skywalker_lib.py

Add I2C hot-plug detection and streaming diagnostics (firmware v3.04.0)

2026-02-15 18:24:45 -07:00

skywalker.py

Add alternative operating modes: spectrum, scan, monitor, lband, track

2026-02-12 17:29:00 -07:00

survey_engine.py

Add DiSEqC motor control, QO-100 DATV reception, and carrier survey

2026-02-15 17:01:11 -07:00

survey.py

Add DiSEqC motor control, QO-100 DATV reception, and carrier survey

2026-02-15 17:01:11 -07:00

test_boot_debug.py

Fix BCM4500 boot: spurious I2C STOP corrupted FX2 controller

2026-02-12 10:34:15 -07:00

test_boot.py

Fix BCM4500 boot: spurious I2C STOP corrupted FX2 controller

2026-02-12 10:34:15 -07:00

test_hamilton.py

Add Hamilton adversarial test suite for firmware safety validation

2026-02-17 13:46:14 -07:00

test_i2c_debug.py

Fix BCM4500 boot: spurious I2C STOP corrupted FX2 controller

2026-02-12 10:34:15 -07:00

test_i2c_isolate.py

Fix BCM4500 boot: spurious I2C STOP corrupted FX2 controller

2026-02-12 10:34:15 -07:00

test_i2c_pinpoint.py

Fix BCM4500 boot: spurious I2C STOP corrupted FX2 controller

2026-02-12 10:34:15 -07:00

ts_analyze.py

Add DiSEqC motor control, QO-100 DATV reception, and carrier survey

2026-02-15 17:01:11 -07:00

tune.py

Add alternative operating modes: spectrum, scan, monitor, lband, track

2026-02-12 17:29:00 -07:00

wine_memdump.py

Extract firmware from official Genpix updater EXEs via Wine memory dump

2026-02-11 06:05:13 -07:00