Ryan Malloy
4447d2c0e7
Updater EXEs are packed (RWX sections, near-random entropy) with anti-debug protection (IsDebuggerPresent/SoftICE check). Bypassed by running under plain Wine and reading /proc/PID/mem with elevated privileges. SW1 v2.13.x updater contains 3 firmware variants (likely .1/.2/.3): - All use LJMP 0x170D entry, 9322-9377 bytes, 10 C2 records each - FW2 vs FW3 differ by 1525 bytes (most similar pair) Rev.2 v2.10.4 updater contains 1 firmware image: - PID=0x0202 (vs SW1's 0x0203), LJMP 0x155F, 8843 bytes, 9 C2 records All images use standard Cypress C2 EEPROM format with entry at 0xE600 (CPUCS).
19 lines
946 B
Plaintext
19 lines
946 B
Plaintext
This firmware update utility will upgrade 8pSK-toUSB2 Rev.2 adapter firmware to ver.2.10.4
|
|
|
|
##############################################################################################################
|
|
#
|
|
# Make sure that genpix 8pSK-toUSB2 Rev.2 adapter is the ONLY genpix device connected to PC during firmware upgrade.
|
|
# Disconnect all other genpix devices.
|
|
#
|
|
# 8PSK module has to be connected to adapter during firmware upgrade procedure.
|
|
#
|
|
# Do NOT switch the PC power off during firmware upgrade procedure.
|
|
# Do NOT plug/unplug any USB devices during firmware upgrade procedure.
|
|
#
|
|
##############################################################################################################
|
|
|
|
8pSK-toUSB2 Rev.2 adapter firmware updater runs in Windows x32/x64 environment only (Windows XP and higher).
|
|
|
|
To start firmware upgrade:
|
|
double-click on Rev2_update_2_10_4.exe file, and follow the instruction on the screen.
|