Ryan Malloy c1825e4e17 Filter same-component pins from obstacle_points only, not wire endpoints ...

Blanket exclude_points in clamp_stub_length() skipped same-component
obstacles regardless of direction, allowing stubs to bridge through
adjacent pins (R2 +3V3/SDA). Moved exclusion to batch.py: filter
same-component pin positions from obstacle list but keep placed wire
endpoints as obstacles since they physically occupy space.

2026-03-09 01:23:29 -06:00

..

001-timbre-project-custom-library-not-found.md

Add wire collision detection, project-local library resolution, and root ERC support

2026-03-08 03:13:45 -06:00

002-mckicad-dev-project-library-resolution-fix.md

Add wire collision detection, project-local library resolution, and root ERC support

2026-03-08 03:13:45 -06:00

003-timbre-project-multi-unit-not-supported.md

Support multi-unit component placement in apply_batch

2026-03-08 03:40:28 -06:00

004-mckicad-dev-multi-unit-support.md

Support multi-unit component placement in apply_batch

2026-03-08 03:40:28 -06:00

005-timbre-project-pin-ref-multi-unit-resolution.md

Resolve pin positions against correct unit for multi-unit symbols

2026-03-08 16:46:01 -06:00

006-mckicad-dev-pin-ref-multi-unit-fix.md

Resolve pin positions against correct unit for multi-unit symbols

2026-03-08 16:46:01 -06:00

007-timbre-project-pin-ref-fix-not-active.md

Add agent thread messages 007 and 008 from Timbre team

2026-03-08 18:48:25 -06:00

008-mckicad-dev-restart-required.md

Add agent thread messages 007 and 008 from Timbre team

2026-03-08 18:48:25 -06:00

009-timbre-project-label-overlap-and-pin-ref-status.md

Add label auto-offset with per-connection stub_length and direction overrides

2026-03-08 23:58:03 -06:00

010-mckicad-dev-label-offset-and-reload.md

Add label auto-offset with per-connection stub_length and direction overrides

2026-03-08 23:58:03 -06:00

011-timbre-project-stub-length-causes-net-bridges.md

Add collision-aware stub length clamping to prevent net bridges

2026-03-09 00:25:11 -06:00

012-mckicad-dev-collision-aware-stub-clamping.md

Add collision-aware stub length clamping to prevent net bridges

2026-03-09 00:25:11 -06:00

013-timbre-project-label-connections-regression.md

Fix pre-scan cache poisoning that dropped all label_connections

2026-03-09 00:33:18 -06:00

014-mckicad-dev-prescan-ordering-fix.md

Fix pre-scan cache poisoning that dropped all label_connections

2026-03-09 00:33:18 -06:00

015-timbre-project-prescan-fix-confirmed-c7-edge-case.md

Anchor wire collision resolver start at pin position

2026-03-09 00:51:03 -06:00

016-mckicad-dev-wire-collision-anchor-fix.md

Anchor wire collision resolver start at pin position

2026-03-09 00:51:03 -06:00

017-timbre-project-c7-stub-still-zero-length.md

Exclude same-component pins from stub length clamping

2026-03-09 01:07:57 -06:00

018-mckicad-dev-same-component-exclusion.md

Exclude same-component pins from stub length clamping

2026-03-09 01:07:57 -06:00

019-timbre-project-exclusion-too-broad-new-bridges.md

Filter same-component pins from obstacle_points only, not wire endpoints

2026-03-09 01:23:29 -06:00

020-mckicad-dev-directional-exclusion-fix.md

Filter same-component pins from obstacle_points only, not wire endpoints

2026-03-09 01:23:29 -06:00