- Add TLS security warning when certificate verification is disabled
- Add getMQTTErrorString() to translate PubSubClient error codes
- Show broker/user info on connection failure for debugging
- Standardize log prefix to [MQTT] (was inconsistent [MQTTS])
- Use transport-agnostic "Network" instead of "WiFi" in messages
- Fix WiFiState/NetworkState enum mismatch in getWiFiStatus()
Error codes now show meaningful messages like:
"Bad credentials (check username/password)" instead of "rc=4"
- Create INetworkManager interface for network abstraction
- Add EthernetManager for ENC28J60 module using EthernetENC library
- Update WiFiManager to implement INetworkManager interface
- Update MQTTBridge to use INetworkManager* instead of WiFiManager&
- Add heltec_v3_ethernet PlatformIO environment
- Uses HSPI bus (GPIO 19/20/47/48) separate from LoRa SPI
Feature-flagged WiFi/MQTT capability (WITH_MQTT) that bridges
LoRa mesh packets to MQTT topics over TLS (port 443). Includes:
- WiFiManager: connection handling with AP fallback mode
- MQTTBridge: TLS-secured pub/sub with FNV-1a deduplication
- WebConfig: REST API for WiFi/MQTT settings
- Embedded web UI dashboard for configuration
Default broker: meshqt.l.supported.systems:443 (MQTTS)
Build with: pio run -e heltec_v3_mqtt
Standalone PlatformIO project using MeshCore as a library.
Features:
- Heltec LoRa32 V3 support (ESP32-S3 + SX1262)
- OLED display integration
- OTA firmware updates via WiFi
- Serial CLI for configuration
Uses symlinked MeshCore library from ../MeshCore
