Ryan Malloy dbed318124 Initial commit: Heltec V3 MeshCore repeater

Standalone PlatformIO project using MeshCore as a library.

Features:
- Heltec LoRa32 V3 support (ESP32-S3 + SX1262)
- OLED display integration
- OTA firmware updates via WiFi
- Serial CLI for configuration

Uses symlinked MeshCore library from ../MeshCore

2026-01-25 12:15:15 -07:00

2.5 KiB

Raw Blame History

Serial Commands

Connect at 115200 baud:

screen /dev/ttyUSB0 115200

Commands are entered without a prompt. Type and press Enter.

System Commands

Command	Description
`ver`	Show firmware version
`board`	Show board/hardware info
`reboot`	Restart the device
`erase`	Factory reset (serial only, not remote)

Network Commands

Command	Description
`advert`	Send advertisement to mesh
`neighbors`	List known neighbor nodes
`neighbor.remove <id>`	Remove a neighbor by ID

Time/Clock Commands

Command	Description
`clock`	Show current RTC time
`clock sync`	Sync clock from mesh
`time <epoch>`	Set time (Unix epoch seconds)

GPS Commands

Command	Description
`gps`	Show GPS status
`gps on`	Enable GPS module
`gps off`	Disable GPS module
`gps sync`	Sync time from GPS
`gps setloc`	Set location from GPS fix
`gps advert none`	Don't include GPS in adverts
`gps advert share`	Share GPS location in adverts
`gps advert prefs`	Use preference setting

Configuration Commands

Command	Description
`get af`	Get airtime fairness setting
`set af <0-100>`	Set airtime fairness (0=off, 100=max)
`password <old> <new>`	Change admin password

Sensor Commands

Command	Description
`sensor list`	List detected sensors
`sensor get <name>`	Read a sensor value
`sensor set <name> <value>`	Configure a sensor

Radio Commands

Command	Description
`tempradio <params>`	Temporarily change radio settings

OTA Update

Command	Description
`start ota`	Start WiFi AP and OTA server

After running, connect to MeshCore-OTA WiFi and browse to http://192.168.4.1/update.

Logging Commands

Command	Description
`log start`	Start packet logging to SPIFFS
`log stop`	Stop packet logging
`clear stats`	Clear statistics counters

Example Session

ver
  -> MeshCore v1.10.0

neighbors
  -> 3 neighbors:
     1. AABBCCDD (-65 dBm, 2 hops)
     2. EEFF0011 (-78 dBm, 1 hop)
     3. 22334455 (-82 dBm, 3 hops)

clock
  -> 2025-01-25 11:45:32 UTC

advert
  -> Advertisement sent

start ota
  -> Started: http://192.168.4.1/update

2.5 KiB Raw Blame History