rsp2k
f79134fee6
Rotated oval pads were built from padded corners that are not in outline order, so they fell back to their bounding box; neighbouring boxes of a rotated socket overlap, and the grid's own-pad exemption opened the overlap to the pin's net, which the exact check then refused. Pads are now the convex hull of their corners, the exact tree checks a rotated pad against that outline, and the grid blocks cells against the same outline. A via reused by a second connection of its net left that connection with no claim on the via's footprint, so ripping the first owner freed cells around a via still on the board. Footprint cells now keep every claimant. A net class wider than the default was searched as a default trace: its spread was empty below half a cell, halos were circular while the exact check compares boxes, and a rip-up route only counted what its centre crossed. The spread now covers the extra width in whole cells, halos are square, and rip-up victims include what the spread crosses. bench/diagnose.py now routes with net-class widths and hole spacing, as the CLI does.
1810 lines
81 KiB
Python
1810 lines
81 KiB
Python
"""A grid-based maze router (MVP): multi-layer, vias, and rip-up-and-retry.
|
|
|
|
Still an *MVP* — not a port of FreeRouting's expansion-room maze / ripper — but
|
|
it routes across the board's signal layers, changes layers through vias, and
|
|
recovers from bad greedy net orderings with rip-up-and-retry:
|
|
|
|
* the occupancy grid has a layer axis; A* nodes are ``(col, row, layer)``;
|
|
* in-plane moves (8-connected, 45-degree) cost distance; a **via move** changes
|
|
layer at a cell for a configurable ``via_cost``; a through via must be clear on
|
|
every signal layer;
|
|
* occupancy is tracked *per connection* so a specific routed connection can be
|
|
removed. When a connection cannot reach its target through free space, the
|
|
router runs a **rip-up** search that may pass through other nets' traces (at a
|
|
penalty), rips up the connections it crosses, routes the failing connection,
|
|
and re-queues the ripped connections for a later pass;
|
|
* passes iterate up to ``max_passes``, keeping the best (fewest-unrouted) result
|
|
and stopping on full success or when a pass changes nothing;
|
|
* **thrash prevention:** each connection may be ripped at most ``rip_cap`` times,
|
|
and the penalty to rip a connection escalates with its rip count, so
|
|
repeatedly-ripped connections harden into walls. Everything is deterministic
|
|
(no RNG).
|
|
|
|
Deferred (still): FreeRouting's free-space expansion rooms, exact shove /
|
|
DRC-clean geometry, and blind/buried via spans.
|
|
"""
|
|
|
|
from __future__ import annotations
|
|
|
|
import heapq
|
|
import itertools
|
|
import math
|
|
import random
|
|
|
|
from freeroute.board.board import BasicBoard
|
|
from freeroute.board.items import ConductionArea, ObstacleArea, Pin, Via
|
|
from freeroute.geometry import IntBox, IntPoint, Simplex
|
|
from freeroute.geometry.octagon import overlaps_2d
|
|
from freeroute.geometry.polyline import corner_box
|
|
|
|
__all__ = ["GridRouter", "RouteResult", "route_board"]
|
|
|
|
# 8-connected in-plane neighbourhood (orthogonal + diagonal) for 45-degree routing.
|
|
_NEIGHBOURS = [
|
|
(1, 0),
|
|
(-1, 0),
|
|
(0, 1),
|
|
(0, -1),
|
|
(1, 1),
|
|
(1, -1),
|
|
(-1, 1),
|
|
(-1, -1),
|
|
]
|
|
|
|
Cell = tuple[int, int]
|
|
Node = tuple[int, int, int] # (col, row, layer)
|
|
|
|
|
|
class RouteResult:
|
|
"""Per-net routing outcome in *board* units.
|
|
|
|
``wires`` maps a net number to a list of ``(layer_index, [IntPoint, ...])``
|
|
trace segments; ``vias`` maps a net number to a list of via locations.
|
|
``routed_net_numbers`` are the nets that got any wire or via.
|
|
"""
|
|
|
|
__slots__ = (
|
|
"wires", "vias", "half_width", "unrouted", "connections", "connection_ends", "failed",
|
|
"net_half", "narrowed",
|
|
)
|
|
|
|
def __init__(self, half_width: int) -> None:
|
|
self.wires: dict[int, list[tuple[int, list[IntPoint]]]] = {}
|
|
self.vias: dict[int, list[IntPoint]] = {}
|
|
self.half_width = half_width
|
|
#: number of ratsnest connections left unrouted
|
|
self.unrouted = 0
|
|
#: the same copper per routed connection: (net_no, wires, vias)
|
|
self.connections: list[tuple[int, list[tuple[int, list[IntPoint]]], list[IntPoint]]] = []
|
|
#: what each routed connection joins, and the zone both ends sit in
|
|
#: (or ""), parallel to ``connections``
|
|
self.connection_ends: list[tuple[str, str, str]] = []
|
|
#: connections left unrouted: (net_no, one end, the other end)
|
|
self.failed: list[tuple[int, str, str]] = []
|
|
#: half width of each net routed wider than the default (its class)
|
|
self.net_half: dict[int, int] = {}
|
|
#: connections of a wider class that only fitted at the default width
|
|
self.narrowed: list[tuple[int, str, str]] = []
|
|
|
|
def add_wire(self, net_no: int, layer: int, path: list[IntPoint]) -> None:
|
|
self.wires.setdefault(net_no, []).append((layer, path))
|
|
|
|
def add_via(self, net_no: int, location: IntPoint) -> None:
|
|
self.vias.setdefault(net_no, []).append(location)
|
|
|
|
@property
|
|
def routed_net_numbers(self) -> set[int]:
|
|
nets = {n for n, w in self.wires.items() if w}
|
|
nets |= {n for n, v in self.vias.items() if v}
|
|
return nets
|
|
|
|
def via_count(self) -> int:
|
|
return sum(len(v) for v in self.vias.values())
|
|
|
|
|
|
class _Connection:
|
|
"""One ratsnest connection (a pin pair) and its routed state."""
|
|
|
|
__slots__ = (
|
|
"index",
|
|
"net_no",
|
|
"a",
|
|
"b",
|
|
"routed",
|
|
"rip_count",
|
|
"wires",
|
|
"vias",
|
|
"trace_cells",
|
|
"via_cells",
|
|
"via_halo",
|
|
"halo_nodes",
|
|
"a_group",
|
|
"b_group",
|
|
"a_end",
|
|
"b_end",
|
|
"path",
|
|
"narrow",
|
|
"half",
|
|
"stubs",
|
|
)
|
|
|
|
def __init__(self, index: int, net_no: int, a: Pin, b: Pin) -> None:
|
|
self.index = index
|
|
self.net_no = net_no
|
|
self.a = a
|
|
self.b = b
|
|
self.routed = False
|
|
self.rip_count = 0
|
|
self.wires: list[tuple[int, list[IntPoint]]] = []
|
|
self.vias: list[IntPoint] = []
|
|
self.trace_cells: list[tuple[Cell, int]] = []
|
|
self.via_cells: list[Cell] = []
|
|
self.via_halo: list[Cell] = []
|
|
self.halo_nodes: list[Node] = []
|
|
# each end's stub: its layer, its copper tiles, and the nodes it claims
|
|
self.stubs: list[tuple[int, list[IntBox], set[Node]]] = []
|
|
# the pins and zones each end may use, and which pin the route ended
|
|
# on (None when it ended on a zone)
|
|
self.a_group: tuple[list[Pin], list] = ([a], [])
|
|
self.b_group: tuple[list[Pin], list] = ([b], [])
|
|
self.a_end: Pin | None = a
|
|
self.b_end: Pin | None = b
|
|
# the node path last committed, so a rip-up can be undone
|
|
self.path: list[Node] | None = None
|
|
# a connection of a wider class that did not fit at that width is
|
|
# routed at the default width instead; the half width it went in at
|
|
self.narrow = False
|
|
self.half = 0
|
|
|
|
|
|
class GridRouter:
|
|
"""Routes a :class:`BasicBoard` with a grid A*, vias, and rip-up-and-retry."""
|
|
|
|
def __init__(
|
|
self,
|
|
board: BasicBoard,
|
|
*,
|
|
trace_width: int,
|
|
clearance: int,
|
|
layers: list[int] | None = None,
|
|
via_cost: float = 10.0,
|
|
rip_up: bool = True,
|
|
max_passes: int = 10,
|
|
rip_cap: int = 4,
|
|
rip_penalty: float = 30.0,
|
|
orthogonal: bool = False,
|
|
via_half: int | None = None,
|
|
edge_clearance: int | None = None,
|
|
resolution: int = 1,
|
|
heuristic_weight: float = 1.0,
|
|
seed: int | None = None,
|
|
route_first: frozenset | None = None,
|
|
access_cost: float = 0.0,
|
|
rollback: bool = True,
|
|
net_widths: dict[int, int] | None = None,
|
|
via_drill: int | None = None,
|
|
hole_to_hole: int = 0,
|
|
) -> None:
|
|
self.board = board
|
|
# Pin access: while a pin still has connections to route, the cells
|
|
# its route would leave by (its end cells, the via it may need there,
|
|
# and the clearance around both) cost other nets this much extra, so
|
|
# they route round a fine-pitch pin's way out instead of sealing it.
|
|
self.access_cost = max(float(access_cost), 0.0)
|
|
self._doorways: dict[Node, list[tuple[int, int]]] = {}
|
|
self._pending: dict[int, int] = {}
|
|
# Rip-up as a transaction: the connections a rip-up route crosses are
|
|
# rerouted at once, and if fewer connections are routed afterwards
|
|
# than before, everything goes back as it was. On by default: over
|
|
# 8 net orders it left 25 to 30 fewer connections unrouted on dense
|
|
# boards and was never clearly worse.
|
|
self.rollback = bool(rollback)
|
|
# None keeps the deterministic order; a seed shuffles which connection
|
|
# routes first, to measure how much a result owes to the order
|
|
self.seed = seed
|
|
# connections, as (net_no, one end, other end), to route before the rest
|
|
self.route_first = frozenset(route_first or ())
|
|
# how far (in cells) an escape stub may run to leave a walled-in pin
|
|
self._escape_cells = 12
|
|
self._crowded_cache: dict = {}
|
|
self._trapped_cache: dict = {}
|
|
self.heuristic_weight = max(float(heuristic_weight), 1.0)
|
|
self.trace_width = max(trace_width, 1)
|
|
self.clearance = max(clearance, 0)
|
|
self.half_width = self.trace_width // 2
|
|
self.via_cost = via_cost
|
|
self.rip_up = rip_up
|
|
self.max_passes = max(max_passes, 1)
|
|
self.rip_cap = max(rip_cap, 0)
|
|
self.rip_penalty = rip_penalty
|
|
# orthogonal routing (axis-aligned segments only) yields exact IntBox
|
|
# trace copper; 8-connected also produces 45-degree segments.
|
|
self._neighbours = _NEIGHBOURS[:4] if orthogonal else _NEIGHBOURS
|
|
self._orthogonal = orthogonal
|
|
# At resolution 1 a cell is exactly one trace plus its clearance, so a
|
|
# trace owning its cell is the whole clearance model. At resolution k
|
|
# cells are k times finer, fine enough to give every pin of a 0.5 mm
|
|
# pitch row its own column, and a trace also claims a halo: the cells
|
|
# whose centre is nearer than trace + clearance to one of its own.
|
|
self.resolution = max(int(resolution), 1)
|
|
self.step = max((self.trace_width + self.clearance) // self.resolution, 1)
|
|
need = self.trace_width + self.clearance
|
|
reach = math.ceil(need / self.step)
|
|
self._halo_offsets = [
|
|
(dx, dy)
|
|
for dx in range(-reach, reach + 1)
|
|
for dy in range(-reach, reach + 1)
|
|
if (dx or dy) and max(abs(dx), abs(dy)) * self.step < need
|
|
]
|
|
# A via's copper is wider than a trace. Another net's trace needs its
|
|
# centre via_half + clearance + half_width from the via's centre, so a
|
|
# via also claims every cell within via_reach of its own.
|
|
self.via_half = via_half or self.half_width
|
|
# copper to board edge; KiCad's rule is usually wider than clearance
|
|
self.edge_clearance = 0 if edge_clearance is None else edge_clearance
|
|
need = self.via_half + self.clearance + self.half_width
|
|
self.via_reach = max(0, math.ceil(need / self.step) - 1)
|
|
# Net classes wider than the default: the grid is laid out for the
|
|
# default width, so a wider trace must also find the cells around its
|
|
# own free, out to its extra half width, and claims a wider halo.
|
|
self._net_half = {
|
|
net: max(width // 2, 1)
|
|
for net, width in (net_widths or {}).items()
|
|
if width // 2 > self.half_width
|
|
}
|
|
self._spread: list[tuple[int, int]] = [] # the current search's
|
|
self._cur_half = self.half_width
|
|
self._halo_by_half: dict[int, list[tuple[int, int]]] = {self.half_width: self._halo_offsets}
|
|
# Hole-to-hole spacing holds between any two vias, of one net or two.
|
|
# Other nets' vias are kept further apart already; a net's own vias
|
|
# (every pin of a supply dropping to its plane) are not, so a via
|
|
# must keep its drill plus the spacing from every via centre, except
|
|
# an own-net via at the very same cell, which it simply reuses.
|
|
drill = via_drill if via_drill else 2 * self.via_half
|
|
need = drill + max(hole_to_hole, 0)
|
|
self._via_drill, self._hole_gap, self._hole_need = drill, max(hole_to_hole, 0), need
|
|
reach = math.ceil(need / self.step)
|
|
self._hole_offsets = [
|
|
(dx, dy)
|
|
for dx in range(-reach, reach + 1)
|
|
for dy in range(-reach, reach + 1)
|
|
if (dx or dy) and math.hypot(dx, dy) * self.step < need
|
|
]
|
|
self._via_nets: dict[Cell, dict[int, int]] = {} # routed via centres
|
|
self._via_centres: list[IntPoint] | None = None # cache for _hole_clear_at
|
|
self._fixed_vias: dict[Cell, int] = {}
|
|
# fixed vias sit anywhere, not on cell centres: exact hole checks
|
|
self._fixed_holes: list[tuple[IntPoint, int]] = []
|
|
self._fixed_via_points: set[tuple[int, IntPoint]] = set()
|
|
|
|
if layers is None:
|
|
layers = [i for i, layer in enumerate(board.layer_structure.arr) if layer.is_signal]
|
|
self.layers = list(layers)
|
|
|
|
box = board.bounding_box
|
|
self.origin_x = box.ll.x
|
|
self.origin_y = box.ll.y
|
|
self.cols = max(1, math.ceil((box.ur.x - box.ll.x) / self.step) + 1)
|
|
self.rows = max(1, math.ceil((box.ur.y - box.ll.y) / self.step) + 1)
|
|
|
|
# static obstacles
|
|
self._pad_block: dict[Node, set[int]] = {}
|
|
self._pad_own: dict[Node, set[int]] = {}
|
|
self._keepout: set[Node] = set()
|
|
self._via_keepout: set[Node] = set()
|
|
# inner power (plane) layers: not routed on, reached by vias
|
|
self._power_layers = {
|
|
i for i, layer in enumerate(board.layer_structure.arr) if not layer.is_signal
|
|
}
|
|
self._zone_cells: dict[int, list[Node]] = {}
|
|
# per-connection occupancy (owner = connection index)
|
|
self._cell_owner: dict[Node, int] = {}
|
|
self._via_owner: dict[Cell, int] = {}
|
|
# every connection whose via covers a cell, in claim order: a via two
|
|
# connections share still blocks after the first of them is ripped
|
|
self._via_claims: dict[Cell, list[int]] = {}
|
|
# trace halos: node -> indices of the connections claiming it
|
|
self._halo: dict[Node, list[int]] = {}
|
|
self._rasterize_obstacles()
|
|
self._rasterize_fixed_copper()
|
|
for item in board.get_items():
|
|
if isinstance(item, Via) and item.fixed and item.net_nos:
|
|
self._fixed_vias[self._cell_of(item.location)] = item.net_nos[0]
|
|
self._fixed_via_points.add((item.net_nos[0], item.location))
|
|
# its own drill, from KiCad's padstack name (Via[0-3]_500:250_um)
|
|
reach = self._via_drill // 2 + (item.drill or self._via_drill) // 2 + self._hole_gap
|
|
self._fixed_holes.append((item.location, reach))
|
|
# Through-hole pads have holes too, and a route changes layer at one
|
|
# for free, so no via (of any net) goes within hole spacing of one.
|
|
# The DSN has no drill for a pad; its smaller half size stands in.
|
|
self._tht_holes: list[tuple[IntPoint, int]] = []
|
|
self._tht_block: set[Cell] = set()
|
|
for pin in board.get_pins():
|
|
if pin.shape is None or sum(1 for layer in pin.layers if layer in self.layers) < 2:
|
|
continue
|
|
box = pin.shape.bounding_box()
|
|
radius = min(box.ur.x - box.ll.x, box.ur.y - box.ll.y) // 2
|
|
reach = radius + self._via_drill // 2 + self._hole_gap
|
|
self._tht_holes.append((pin.location, reach))
|
|
ring = IntBox(pin.location.x, pin.location.y, pin.location.x, pin.location.y)
|
|
for cell in self._cells_in_box(ring, reach):
|
|
self._tht_block.add(cell)
|
|
|
|
# --- grid helpers -------------------------------------------------------
|
|
|
|
def _cell_of(self, point: IntPoint) -> Cell:
|
|
gx = round((point.x - self.origin_x) / self.step)
|
|
gy = round((point.y - self.origin_y) / self.step)
|
|
gx = min(max(gx, 0), self.cols - 1)
|
|
gy = min(max(gy, 0), self.rows - 1)
|
|
return gx, gy
|
|
|
|
def _cell_center(self, cell: Cell) -> IntPoint:
|
|
return IntPoint(self.origin_x + cell[0] * self.step, self.origin_y + cell[1] * self.step)
|
|
|
|
def _cells_in_box(self, box, margin: int):
|
|
"""Cells whose centre lies strictly inside ``box`` grown by ``margin``.
|
|
|
|
A trace centred there would come closer than ``margin`` to the box.
|
|
Rounding the bounds outward instead blocked cells up to half a step
|
|
clear of it, which walled in every pin of a 0.5 mm pitch package.
|
|
"""
|
|
lo_x = math.floor((box.ll.x - margin - self.origin_x) / self.step) + 1
|
|
hi_x = math.ceil((box.ur.x + margin - self.origin_x) / self.step) - 1
|
|
lo_y = math.floor((box.ll.y - margin - self.origin_y) / self.step) + 1
|
|
hi_y = math.ceil((box.ur.y + margin - self.origin_y) / self.step) - 1
|
|
for gx in range(max(lo_x, 0), min(hi_x, self.cols - 1) + 1):
|
|
for gy in range(max(lo_y, 0), min(hi_y, self.rows - 1) + 1):
|
|
yield gx, gy
|
|
|
|
def _outline_blocked(self, reach: int) -> set[Cell]:
|
|
"""Cells whose centre is outside the outline or within ``reach`` of its edge."""
|
|
outline = self.board.outline
|
|
blocked: set[Cell] = set()
|
|
for gy in range(self.rows): # outside: one scanline per row
|
|
y = self.origin_y + gy * self.step
|
|
spans = outline.row_inside_spans(y)
|
|
for gx in range(self.cols):
|
|
x = self.origin_x + gx * self.step
|
|
if not any(lo < x < hi for lo, hi in spans):
|
|
blocked.add((gx, gy))
|
|
for a, b in outline.edges(): # too close: only cells near each edge
|
|
edge_box = IntBox(min(a.x, b.x), min(a.y, b.y), max(a.x, b.x), max(a.y, b.y))
|
|
for cell in self._cells_in_box(edge_box, reach):
|
|
if cell not in blocked and outline.edge_distance(self._cell_center(cell)) < reach:
|
|
blocked.add(cell)
|
|
return blocked
|
|
|
|
def _inside_own_pad(self, cell: Cell, shape) -> bool:
|
|
"""A trace centred on ``cell`` lies entirely on the pad's own copper."""
|
|
c = self._cell_center(cell)
|
|
h = self.half_width
|
|
return all(
|
|
shape.contains(IntPoint(c.x + dx, c.y + dy)) for dx in (-h, h) for dy in (-h, h)
|
|
)
|
|
|
|
def _pad_cells(self, shape, box: IntBox, margin: int):
|
|
"""Cells where a trace square ``margin`` wide around the centre overlaps
|
|
the pad: its box when it is one, else its exact (rotated) outline,
|
|
which is what the exact engine checks against."""
|
|
cells = self._cells_in_box(box, margin)
|
|
if not isinstance(shape, Simplex) or shape.is_int_box():
|
|
yield from cells
|
|
return
|
|
for cell in cells:
|
|
c = self._cell_center(cell)
|
|
if overlaps_2d(shape, IntBox(c.x - margin, c.y - margin, c.x + margin, c.y + margin)):
|
|
yield cell
|
|
|
|
def _rasterize_obstacles(self) -> None:
|
|
margin = self.clearance + self.half_width
|
|
outline = self.board.outline
|
|
self._via_edge_block: set[Cell] = set()
|
|
# wire keepouts as boxes, to check a pin stub the way the exact engine will
|
|
self._keepout_boxes: dict[int, list[tuple[IntBox, bool]]] = {}
|
|
# via keepouts as boxes, and other copper a via in a pad must clear
|
|
self._via_keepout_boxes: list[tuple[IntBox, bool]] = []
|
|
self._static_copper: list[tuple[IntBox, int]] | None = None
|
|
# pin end nodes no wire can reach without entering a keepout
|
|
self._via_only: set[Node] = set()
|
|
if outline is not None:
|
|
# cells too close to the real outline (rounded corners included):
|
|
# for a trace on every layer, and separately for a via's wider copper
|
|
for cell in self._outline_blocked(self.half_width + self.edge_clearance):
|
|
for layer in self.layers:
|
|
self._keepout.add((*cell, layer))
|
|
self._via_edge_block = self._outline_blocked(self.via_half + self.edge_clearance)
|
|
for item in self.board.get_items():
|
|
if isinstance(item, Pin):
|
|
box = item.shape.bounding_box() if item.shape is not None else None
|
|
if box is None or box.is_empty():
|
|
continue
|
|
net = item.net_nos[0] if item.net_nos else 0
|
|
pin_layers = [layer for layer in item.layers if layer in self.layers]
|
|
for cell in self._pad_cells(item.shape, box, margin):
|
|
for layer in pin_layers:
|
|
self._pad_block.setdefault((*cell, layer), set()).add(net)
|
|
# Copper of the pin's own net: a trace inside it adds nothing,
|
|
# so it is open to that net however close the neighbours are.
|
|
# That is how a route leaves a fine-pitch pin.
|
|
for cell in self._cells_in_box(box, 0):
|
|
if self._inside_own_pad(cell, item.shape):
|
|
for layer in pin_layers:
|
|
self._pad_own.setdefault((*cell, layer), set()).add(net)
|
|
elif isinstance(item, ConductionArea):
|
|
continue # a zone is copper of its net, not an obstacle
|
|
elif isinstance(item, ObstacleArea):
|
|
if item.layer not in self.layers:
|
|
continue
|
|
# Tile by tile: the area's own bounding box of a ring (a
|
|
# no-track border along the board edge) is the whole board.
|
|
for tile in item.tiles:
|
|
box = tile.bounding_box()
|
|
if box.is_empty():
|
|
continue
|
|
# the same distance the exact engine verifies against
|
|
if item.blocks_wires:
|
|
self._keepout_boxes.setdefault(item.layer, []).append(
|
|
(box, item.clearance)
|
|
)
|
|
# a rule area takes no clearance: a trace may touch it
|
|
reach = margin if item.clearance else self.half_width
|
|
for cell in self._cells_in_box(box, reach):
|
|
if item.blocks_wires:
|
|
self._keepout.add((*cell, item.layer))
|
|
if item.blocks_vias:
|
|
self._via_keepout.add((*cell, item.layer))
|
|
if item.blocks_vias:
|
|
self._via_keepout_boxes.append((box, item.clearance))
|
|
|
|
def _rasterize_fixed_copper(self) -> None:
|
|
"""Tracks and vias already on the board: copper of their net, which
|
|
other nets keep the same distance from as from a pad."""
|
|
margin = self.clearance + self.half_width
|
|
for net, layers, box in self.board.get_fixed_copper():
|
|
on = [layer for layer in layers if layer in self.layers]
|
|
for cell in self._cells_in_box(box, margin):
|
|
for layer in on:
|
|
self._pad_block.setdefault((*cell, layer), set()).add(net)
|
|
|
|
# --- occupancy cost -----------------------------------------------------
|
|
|
|
def _enter_cost(
|
|
self,
|
|
cell: Cell,
|
|
layer: int,
|
|
net_no: int,
|
|
allow_ripup: bool,
|
|
conns: list[_Connection],
|
|
wire_keepout: bool = True,
|
|
) -> float | None:
|
|
""":meth:`_enter_cost_base`, and for a trace wider than the default
|
|
the same for every cell its extra width reaches (the worst of them)."""
|
|
cost = self._enter_cost_base(cell, layer, net_no, allow_ripup, conns, wire_keepout)
|
|
if cost is None or not self._spread:
|
|
return cost
|
|
for dx, dy in self._spread:
|
|
c = (cell[0] + dx, cell[1] + dy)
|
|
if not (0 <= c[0] < self.cols and 0 <= c[1] < self.rows):
|
|
return None
|
|
more = self._enter_cost_base(c, layer, net_no, allow_ripup, conns, wire_keepout)
|
|
if more is None:
|
|
return None
|
|
cost = max(cost, more)
|
|
return cost
|
|
|
|
def _enter_cost_base(
|
|
self,
|
|
cell: Cell,
|
|
layer: int,
|
|
net_no: int,
|
|
allow_ripup: bool,
|
|
conns: list[_Connection],
|
|
wire_keepout: bool = True,
|
|
) -> float | None:
|
|
"""Cost to enter ``(cell, layer)`` for ``net_no``; ``None`` if blocked.
|
|
|
|
Static pads/keepouts always block. A cell occupied by another net's trace
|
|
or via is impassable in free-space mode; in rip-up mode it is passable at
|
|
a penalty that escalates with the owner's rip count, unless the owner has
|
|
already hit ``rip_cap`` (then it hardens into a wall).
|
|
"""
|
|
node = (*cell, layer)
|
|
if wire_keepout and node in self._keepout:
|
|
return None
|
|
pads = self._pad_block.get(node)
|
|
if pads and any(n != net_no for n in pads) and net_no not in self._pad_own.get(node, ()):
|
|
return None
|
|
blocking = None
|
|
owner = self._cell_owner.get(node)
|
|
if owner is not None and conns[owner].net_no != net_no:
|
|
blocking = owner
|
|
else:
|
|
via_owner = self._via_owner.get(cell)
|
|
if via_owner is not None and conns[via_owner].net_no != net_no:
|
|
blocking = via_owner
|
|
if blocking is None:
|
|
for i in self._halo.get(node, ()):
|
|
if conns[i].net_no != net_no:
|
|
blocking = i
|
|
break
|
|
if blocking is None:
|
|
return 0.0
|
|
if not allow_ripup:
|
|
return None
|
|
rip_count = conns[blocking].rip_count
|
|
if rip_count >= self.rip_cap:
|
|
return None
|
|
return self.rip_penalty * (1 + rip_count)
|
|
|
|
def _via_cells(self, cell: Cell) -> list[Cell]:
|
|
"""The cell a via sits in plus the neighbours its copper reaches."""
|
|
r = self.via_reach
|
|
cx, cy = cell
|
|
return [
|
|
(x, y)
|
|
for x in range(max(cx - r, 0), min(cx + r, self.cols - 1) + 1)
|
|
for y in range(max(cy - r, 0), min(cy + r, self.rows - 1) + 1)
|
|
]
|
|
|
|
def _via_placeable(self, cell: Cell, net_no: int, conns: list[_Connection]) -> bool:
|
|
"""A through via needs its whole footprint free of other nets on every layer."""
|
|
if cell in self._via_edge_block:
|
|
return False
|
|
for c in self._via_cells(cell):
|
|
for layer in self.layers:
|
|
if (*c, layer) in self._via_keepout:
|
|
return False
|
|
if self._enter_cost_base(c, layer, net_no, False, conns, wire_keepout=False) != 0.0:
|
|
return False
|
|
return self._holes_clear(cell, net_no)
|
|
|
|
def _near_path_via(self, node: Node, cell: Cell, came_from: dict) -> bool:
|
|
"""A layer change earlier on the route that reaches ``node`` sits
|
|
within hole spacing of ``cell`` (and is not the same through via).
|
|
Committed vias are checked elsewhere; a route's own are not yet
|
|
committed while it is searched. Looks back far enough to cover the
|
|
hole spacing twice over, not along the whole route."""
|
|
limit = 4 * (math.ceil(self._hole_need / self.step) + 1)
|
|
need = self._hole_need / self.step
|
|
steps = 0
|
|
while node in came_from and steps < limit:
|
|
prev = came_from[node]
|
|
changes_layer = prev[:2] == node[:2] and prev[2] != node[2]
|
|
if changes_layer and node[:2] != cell and (
|
|
math.hypot(node[0] - cell[0], node[1] - cell[1]) < need
|
|
):
|
|
return True
|
|
node = prev
|
|
steps += 1
|
|
return False
|
|
|
|
def _via_nets_at(self, cell: Cell) -> set[int]:
|
|
nets = {net for net, n in self._via_nets.get(cell, {}).items() if n > 0}
|
|
fixed = self._fixed_vias.get(cell)
|
|
if fixed is not None:
|
|
nets.add(fixed)
|
|
return nets
|
|
|
|
def _holes_clear(self, cell: Cell, net_no: int) -> bool:
|
|
"""No via centre within hole-to-hole reach, but an own-net one here,
|
|
and no through-hole pad's hole within reach at all."""
|
|
if cell in self._tht_block:
|
|
return False
|
|
if self._fixed_holes:
|
|
here = self._cell_center(cell)
|
|
for loc, reach in self._fixed_holes:
|
|
d = math.hypot(loc.x - here.x, loc.y - here.y)
|
|
if d < reach and d > self.step: # beyond its own cell: too close
|
|
return False
|
|
if self._via_nets_at(cell) - {net_no}:
|
|
return False
|
|
cx, cy = cell
|
|
return not any(self._via_nets_at((cx + dx, cy + dy)) for dx, dy in self._hole_offsets)
|
|
|
|
# --- A* search ----------------------------------------------------------
|
|
|
|
def _conn_half(self, conn: _Connection) -> int:
|
|
"""The half width a connection is routed at: its class's, unless it
|
|
has fallen back to the default."""
|
|
return self.half_width if conn.narrow else self._net_half.get(conn.net_no, self.half_width)
|
|
|
|
def _spread_for(self, half: int) -> list[tuple[int, int]]:
|
|
"""Cells a trace of ``half`` also needs free: every cell out to its
|
|
extra half width, rounded up to whole cells. Blocks, halos and via
|
|
footprints are sized for a default-width trace, and copper is checked
|
|
as boxes, so anything within that square could be too close."""
|
|
extra = half - self.half_width
|
|
if extra <= 0:
|
|
return []
|
|
reach = math.ceil(extra / self.step)
|
|
return [
|
|
(dx, dy)
|
|
for dx in range(-reach, reach + 1)
|
|
for dy in range(-reach, reach + 1)
|
|
if dx or dy
|
|
]
|
|
|
|
def _halo_for(self, half: int) -> list[tuple[int, int]]:
|
|
"""Cells a committed trace of ``half`` claims from default-width traces."""
|
|
offsets = self._halo_by_half.get(half)
|
|
if offsets is None:
|
|
need = half + self.clearance + self.half_width
|
|
reach = math.ceil(need / self.step)
|
|
offsets = self._halo_by_half[half] = [
|
|
(dx, dy)
|
|
for dx in range(-reach, reach + 1)
|
|
for dy in range(-reach, reach + 1)
|
|
if (dx or dy) and max(abs(dx), abs(dy)) * self.step < need
|
|
]
|
|
return offsets
|
|
|
|
def _search(
|
|
self, conn: _Connection, allow_ripup: bool, conns: list[_Connection]
|
|
) -> list[Node] | None:
|
|
half = self._conn_half(conn)
|
|
self._cur_half, self._spread = half, self._spread_for(half)
|
|
try:
|
|
return self._search_at_width(conn, allow_ripup, conns)
|
|
finally:
|
|
self._cur_half, self._spread = self.half_width, []
|
|
|
|
def _search_at_width(
|
|
self, conn: _Connection, allow_ripup: bool, conns: list[_Connection]
|
|
) -> list[Node] | None:
|
|
goal_cell = self._group_target(conn.b_group)
|
|
if not conn.b_group[0] and any(z.layer in self._power_layers for z in conn.b_group[1]):
|
|
# the plane is everywhere: aim at where the route starts instead
|
|
goal_cell = self._group_target(conn.a_group)
|
|
starts = self._group_ends(conn.a_group, conn.net_no, conns, allow_ripup)
|
|
goals = self._group_ends(conn.b_group, conn.net_no, conns, allow_ripup)
|
|
if not starts or not goals:
|
|
return None
|
|
# A start that is already an end joins at once, except that ending on
|
|
# a plane there needs a via: one that cannot be placed (a via keepout,
|
|
# another net's pad) is no end, and the search goes on from there.
|
|
common = [
|
|
n for n in sorted(set(starts) & set(goals))
|
|
if not isinstance(goals[n], ConductionArea)
|
|
or self._via_placeable((n[0], n[1]), conn.net_no, conns)
|
|
]
|
|
if common:
|
|
conn.a_end, conn.b_end = starts[common[0]], goals[common[0]]
|
|
return [common[0]]
|
|
net_no = conn.net_no
|
|
|
|
open_heap: list[tuple[float, Node]] = []
|
|
g_score: dict[Node, float] = {}
|
|
came_from: dict[Node, Node] = {}
|
|
# a stub costs its length, so the nearest cell wins unless it is blocked
|
|
# a pin end costs its stub; a zone or plane end is entered normally
|
|
# (and in rip-up mode the rip penalty of whatever lies on it)
|
|
goal_stub = {
|
|
n: self._stub_cost(p, n) + self._end_penalty(p, n, net_no, allow_ripup, conns)
|
|
for n, p in goals.items()
|
|
if isinstance(p, Pin)
|
|
}
|
|
for s in sorted(starts):
|
|
pin = starts[s]
|
|
g_score[s] = (
|
|
self._stub_cost(pin, s) + self._end_penalty(pin, s, net_no, allow_ripup, conns)
|
|
if isinstance(pin, Pin)
|
|
else 0.0
|
|
)
|
|
heapq.heappush(open_heap, (g_score[s] + self._h(s, goal_cell), s))
|
|
|
|
# Via footprints are checked lazily: a layer change goes on the heap as
|
|
# a candidate and is checked only if it is popped. Most never are (a
|
|
# via costs a lot), and the check is the single most expensive thing
|
|
# the search does. A check can only rule a via out, never make it
|
|
# cheaper, so deferring it cannot change which route is found.
|
|
via_ok: dict[Cell, bool] = {}
|
|
while open_heap:
|
|
entry = heapq.heappop(open_heap)
|
|
if len(entry) == 4: # a deferred via: (f, target, g, source)
|
|
_, target, g_via, source = entry
|
|
if g_via >= g_score.get(target, math.inf):
|
|
continue
|
|
cell = (target[0], target[1])
|
|
ok = via_ok.get(cell)
|
|
if ok is None:
|
|
ok = via_ok[cell] = self._via_placeable(cell, net_no, conns)
|
|
# a via leaving or reaching a walled-in pin goes in its pad
|
|
# (see _commit), so it has to fit there exactly
|
|
for node, ends in ((source, starts), (target, goals)):
|
|
pin = ends.get(node)
|
|
if ok and isinstance(pin, Pin) and self._walled(node):
|
|
ok = self._via_fits_at(pin.location, net_no)
|
|
if ok and self._near_path_via(source, cell, came_from):
|
|
ok = False # too close to a via earlier on this same route
|
|
if ok:
|
|
self._relax(source, target, g_via, goal_cell, g_score, came_from, open_heap)
|
|
continue
|
|
current = entry[1]
|
|
if current in goals:
|
|
end = goals[current]
|
|
cell = (current[0], current[1])
|
|
if isinstance(end, ConductionArea): # a plane end needs its via to fit
|
|
ok = via_ok.get(cell)
|
|
if ok is None:
|
|
ok = via_ok[cell] = self._via_placeable(cell, net_no, conns)
|
|
if ok and self._near_path_via(current, cell, came_from):
|
|
ok = False
|
|
else:
|
|
ok = True
|
|
if ok:
|
|
path = _reconstruct(came_from, current)
|
|
conn.a_end, conn.b_end = starts.get(path[0]), end
|
|
return path
|
|
cx, cy, cl = current
|
|
base = g_score[current]
|
|
# A cell inside a wire keepout (a pin there, or where a via
|
|
# landed) may only be left by another via: a wire from it would
|
|
# start inside the keepout.
|
|
blocked = current in self._keepout or current in self._via_only
|
|
neighbours = () if blocked else self._neighbours
|
|
for dx, dy in neighbours:
|
|
cell = (cx + dx, cy + dy)
|
|
if not (0 <= cell[0] < self.cols and 0 <= cell[1] < self.rows):
|
|
continue
|
|
nxt = (*cell, cl)
|
|
if nxt in goal_stub: # a pin end; a zone end is entered normally
|
|
if nxt in self._keepout or nxt in self._via_only:
|
|
continue # a pin inside a keepout is reached by a via only
|
|
enter = goal_stub[nxt]
|
|
else:
|
|
enter = self._enter_cost(cell, cl, net_no, allow_ripup, conns)
|
|
if enter is None:
|
|
continue
|
|
if self._doorways:
|
|
enter += self._access(nxt, net_no)
|
|
step = 1.0 if dx == 0 or dy == 0 else math.sqrt(2)
|
|
self._relax(
|
|
current, nxt, base + step + enter, goal_cell, g_score, came_from, open_heap
|
|
)
|
|
if len(self.layers) > 1:
|
|
g_via = base + self.via_cost
|
|
if self._doorways:
|
|
g_via += self._access(current, net_no)
|
|
for layer in self.layers:
|
|
if layer == cl:
|
|
continue
|
|
nxt = (cx, cy, layer)
|
|
if g_via < g_score.get(nxt, math.inf):
|
|
heapq.heappush(
|
|
open_heap, (g_via + self._h(nxt, goal_cell), nxt, g_via, current)
|
|
)
|
|
return None
|
|
|
|
# --- pin stubs ----------------------------------------------------------
|
|
# A pin rarely sits on a cell centre, so every route starts and ends with a
|
|
# short stub from the pin to its first cell. The grid has to see that
|
|
# copper too, or a stub ends up closer than clearance to a trace in the
|
|
# cell beside it.
|
|
|
|
def _walled(self, node: Node) -> bool:
|
|
"""A pin end no wire may leave or reach: only a via in its pad will do."""
|
|
return node in self._keepout or node in self._via_only
|
|
|
|
def _via_fits_at(self, point: IntPoint, net_no: int) -> bool:
|
|
"""A via centred exactly on ``point`` clears every via keepout and all
|
|
other nets' pads and fixed copper (what a via in a pad must meet)."""
|
|
via = IntBox(point.x - self.via_half, point.y - self.via_half,
|
|
point.x + self.via_half, point.y + self.via_half)
|
|
grown = via.offset(self.clearance)
|
|
for box, needs in self._via_keepout_boxes:
|
|
if box.overlaps(grown if needs else via):
|
|
return False
|
|
if self._static_copper is None:
|
|
copper = [
|
|
(p.shape.bounding_box(), p.net_nos[0] if p.net_nos else -1)
|
|
for p in self.board.get_pins()
|
|
if p.shape is not None and any(layer in self.layers for layer in p.layers)
|
|
]
|
|
copper += [(box, net) for net, _, box in self.board.get_fixed_copper()]
|
|
self._static_copper = copper
|
|
if any(net != net_no and box.overlaps(grown) for box, net in self._static_copper):
|
|
return False
|
|
return self._hole_clear_at(point)
|
|
|
|
def _hole_clear_at(self, point: IntPoint) -> bool:
|
|
"""Hole spacing measured exactly from ``point`` to every via and
|
|
through-hole pad (a via moved into a pad is not on its cell's centre)."""
|
|
need = self._hole_need
|
|
if self._via_centres is None: # rebuilt only after vias change
|
|
self._via_centres = [loc for _net, loc in self._fixed_via_points] + [
|
|
self._cell_center(c) for c, count in self._via_nets.items() if any(count.values())
|
|
]
|
|
if any(math.hypot(c.x - point.x, c.y - point.y) < need for c in self._via_centres):
|
|
return False
|
|
return not any(
|
|
math.hypot(loc.x - point.x, loc.y - point.y) < reach for loc, reach in self._tht_holes
|
|
)
|
|
|
|
def _stub_points(self, pin_location: IntPoint, cell: Cell) -> list[IntPoint]:
|
|
"""The stub's corners, from the pin to its cell centre.
|
|
|
|
The direct segment is fine for 45-degree routing. Orthogonal routing
|
|
leaves the pin straight along the axis it is further off the cell on
|
|
and jogs across to the centre at the end: an L of two flush boxes,
|
|
which is what the exact check sees. A single slanted segment is
|
|
checked as its bounding box there, and a 1 mm trace to a column
|
|
0.1 mm off a 1.27 mm pitch pin's centreline then lands inside the
|
|
clearance of the pad next door, though the straight exit clears it.
|
|
"""
|
|
end = self._cell_center(cell)
|
|
dx, dy = end.x - pin_location.x, end.y - pin_location.y
|
|
if not self._orthogonal or dx == 0 or dy == 0:
|
|
return [pin_location, end]
|
|
if abs(dx) >= abs(dy):
|
|
return [pin_location, IntPoint(end.x, pin_location.y), end]
|
|
return [pin_location, IntPoint(pin_location.x, end.y), end]
|
|
|
|
def _stub_cells(self, pin_location: IntPoint, cell: Cell, half: int | None = None) -> list[Cell]:
|
|
"""Cells where another net's trace would come too close to the stub."""
|
|
from freeroute.board.outline import _point_segment
|
|
|
|
points = self._stub_points(pin_location, cell)
|
|
end = points[-1]
|
|
reach = (half or self._cur_half) + self.half_width + self.clearance
|
|
box = IntBox(
|
|
min(pin_location.x, end.x), min(pin_location.y, end.y),
|
|
max(pin_location.x, end.x), max(pin_location.y, end.y),
|
|
)
|
|
legs = list(zip(points, points[1:], strict=False))
|
|
return [
|
|
c
|
|
for c in self._cells_in_box(box, reach)
|
|
if min(_point_segment(self._cell_center(c), a, b) for a, b in legs) < reach
|
|
]
|
|
|
|
def _stub_clear(
|
|
self,
|
|
pin: Pin,
|
|
cell: Cell,
|
|
layer: int,
|
|
net_no: int,
|
|
conns,
|
|
keepouts_only: bool = False,
|
|
allow_ripup: bool = False,
|
|
) -> bool:
|
|
keepouts = self._keepout_boxes.get(layer)
|
|
if keepouts:
|
|
# the stub is off the grid, so check it exactly, as the exact
|
|
# engine will: its copper grown by clearance must miss every keepout
|
|
from freeroute.geometry.polyline import Polyline, PolylineShape
|
|
|
|
points = self._stub_points(pin.location, cell)
|
|
if points[-1] != pin.location:
|
|
for tile in PolylineShape(Polyline(points), self._cur_half).tiles():
|
|
grown = tile.offset(self.clearance)
|
|
if any(k.overlaps(grown if needs else tile) for k, needs in keepouts):
|
|
return False
|
|
# the track's round end at the pin, for a rule area
|
|
cap = corner_box(pin.location, self._cur_half)
|
|
if any(not needs and k.overlaps(cap) for k, needs in keepouts):
|
|
return False
|
|
if keepouts_only:
|
|
return True
|
|
owners = self._stub_owners(pin, cell, layer, net_no, conns)
|
|
# in rip-up mode a route on the stub is one more to rip, unless it may not be
|
|
return not owners or (
|
|
allow_ripup and all(conns[i].rip_count < self.rip_cap for i in owners)
|
|
)
|
|
|
|
def _stub_tiles(self, pin_location: IntPoint, cell: Cell, half: int) -> list[IntBox]:
|
|
"""The stub's copper: its legs, and a square at each corner and at the
|
|
cell end, where the route carries on."""
|
|
points = self._stub_points(pin_location, cell)
|
|
tiles = [corner_box(point, half) for point in points[1:]]
|
|
if len(points) > 1 and points[-1] != pin_location:
|
|
from freeroute.geometry.polyline import Polyline, PolylineShape
|
|
|
|
tiles += PolylineShape(Polyline(points), half).tiles()
|
|
return tiles
|
|
|
|
def _stub_owners(
|
|
self, pin: Pin, cell: Cell, layer: int, net_no: int, conns, half: int | None = None
|
|
) -> set[int]:
|
|
"""Other nets' routes whose copper the stub from ``pin`` to ``cell`` would touch."""
|
|
owners: set[int] = set()
|
|
grown = None
|
|
for c in self._stub_cells(pin.location, cell, half):
|
|
node = (*c, layer)
|
|
owner = self._cell_owner.get(node)
|
|
if owner is not None and conns[owner].net_no != net_no and owner not in owners:
|
|
# Both stubs are off the grid, and each claims the cells a
|
|
# trace centred there would crowd, so two stubs side by side
|
|
# (neighbouring pins leaving straight) overlap in claims well
|
|
# before their copper comes near. Check those exactly.
|
|
other = [tiles for lay, tiles, nodes in conns[owner].stubs if node in nodes]
|
|
if other:
|
|
if grown is None:
|
|
grown = [
|
|
t.offset(self.clearance)
|
|
for t in self._stub_tiles(pin.location, cell, half or self._cur_half)
|
|
]
|
|
if not any(g.overlaps(t) for tiles in other for t in tiles for g in grown):
|
|
continue
|
|
owners.add(owner)
|
|
via_owner = self._via_owner.get(c)
|
|
if via_owner is not None and conns[via_owner].net_no != net_no:
|
|
owners.add(via_owner)
|
|
return owners
|
|
|
|
def _end_penalty(self, pin: Pin, node: Node, net_no: int, allow_ripup: bool, conns) -> float:
|
|
"""Rip-up cost of starting or ending on ``node``: the routes on its
|
|
cell and on the stub to it, each at the penalty entering it would cost."""
|
|
if not allow_ripup:
|
|
return 0.0
|
|
owners = self._stub_owners(pin, node[:2], node[2], net_no, conns)
|
|
owners |= self._crossed_owners([node], net_no, conns)
|
|
return sum(self.rip_penalty * (1 + conns[i].rip_count) for i in owners)
|
|
|
|
def _zone_nodes(self, zone) -> list[Node]:
|
|
"""Cells of a zone where a via of this net fits inside its copper; for a
|
|
plane on a power layer, on every routing layer (a via reaches it)."""
|
|
key = id(zone)
|
|
if key not in self._zone_cells:
|
|
h = self.via_half
|
|
layers = [zone.layer] if zone.layer in self.layers else list(self.layers)
|
|
nodes = []
|
|
for tile in zone.tiles:
|
|
for cell in self._cells_in_box(tile.bounding_box(), 0):
|
|
c = self._cell_center(cell)
|
|
if all(
|
|
zone.polygon.contains(IntPoint(c.x + dx, c.y + dy))
|
|
for dx in (-h, h) for dy in (-h, h)
|
|
):
|
|
nodes.extend((*cell, layer) for layer in layers)
|
|
self._zone_cells[key] = sorted(set(nodes))
|
|
return self._zone_cells[key]
|
|
|
|
def _zone_is_solid(self, zone, coverage: float = 0.95) -> bool:
|
|
"""Whether a zone's fill can be trusted to be one piece of copper.
|
|
|
|
A zone outline is where copper may go, not where it will be: other
|
|
nets' tracks through a board-wide pour break its fill into islands,
|
|
and a pad inside the outline need not reach the rest of the net. It
|
|
is safe to count on only when no track can cross it, which is what a
|
|
no-tracks rule area over the zone guarantees (the rc4 power pours).
|
|
Otherwise the zone is left out and its pads are routed with tracks.
|
|
"""
|
|
cells = [cell for tile in zone.tiles for cell in self._cells_in_box(tile.bounding_box(), 0)
|
|
if zone.polygon.contains(self._cell_center(cell))]
|
|
if not cells:
|
|
return False
|
|
covered = sum((*cell, zone.layer) in self._keepout for cell in cells)
|
|
return covered >= coverage * len(cells)
|
|
|
|
def _left_to_zone(self, conn) -> str:
|
|
"""The zone both ends of an unrouted connection sit in, if any: its
|
|
fill may well join them, even when it is not trusted for routing."""
|
|
for zone in self._every_zone_by_net.get(conn.net_no, []):
|
|
if any(_pin_touches_zone(p, zone) for p in conn.a_group[0]) and any(
|
|
_pin_touches_zone(p, zone) for p in conn.b_group[0]
|
|
):
|
|
return zone.name or "zone"
|
|
return ""
|
|
|
|
def _group_ends(
|
|
self, group, net_no: int, conns, allow_ripup: bool = False
|
|
) -> dict[Node, Pin | None]:
|
|
"""End nodes of a group, each mapped to its pin (None for a zone cell)."""
|
|
ends: dict[Node, Pin | None] = {}
|
|
for pin in group[0]:
|
|
for node in sorted(self._end_nodes(pin, net_no, conns, allow_ripup)):
|
|
ends.setdefault(node, pin)
|
|
for zone in group[1]:
|
|
plane = zone.layer in self._power_layers
|
|
for node in self._zone_nodes(zone):
|
|
# a plane end is marked with the plane: the route ends in a via
|
|
ends.setdefault(node, zone if plane else None)
|
|
return ends
|
|
|
|
def _group_target(self, group) -> Cell:
|
|
if group[0]:
|
|
return self._cell_of(group[0][0].location)
|
|
box = group[1][0].bounding_box()
|
|
return self._cell_of(IntPoint((box.ll.x + box.ur.x) // 2, (box.ll.y + box.ur.y) // 2))
|
|
|
|
def _stub_cost(self, pin: Pin, node: Node) -> float:
|
|
c = self._cell_center(node[:2])
|
|
dx, dy = abs(c.x - pin.location.x), abs(c.y - pin.location.y)
|
|
if self._orthogonal: # measured the way the route itself is allowed to move
|
|
return (dx + dy) / self.step
|
|
return math.hypot(dx, dy) / self.step
|
|
|
|
def _end_nodes(self, pin: Pin, net_no: int, conns, allow_ripup: bool = False) -> set[Node]:
|
|
"""Nodes a route may start or end on for ``pin``: the nearest cell and
|
|
its neighbours, where the cell is enterable and the stub to it is clear.
|
|
A crowded fine-pitch pin gets more than one way out. In rip-up mode a
|
|
cell or stub another route is on counts as enterable, as it does
|
|
everywhere else, or a pin whose only way out another net has taken
|
|
could never have it back."""
|
|
layers = [layer for layer in pin.layers if layer in self.layers]
|
|
cx, cy = self._cell_of(pin.location)
|
|
nodes: set[Node] = set()
|
|
for dx, dy in ((0, 0), *self._neighbours):
|
|
cell = (cx + dx, cy + dy)
|
|
if not (0 <= cell[0] < self.cols and 0 <= cell[1] < self.rows):
|
|
continue
|
|
for layer in layers:
|
|
if (dx or dy) and self._enter_cost(cell, layer, net_no, allow_ripup, conns) is None:
|
|
continue
|
|
if self._stub_clear(pin, cell, layer, net_no, conns, allow_ripup=allow_ripup):
|
|
nodes.add((*cell, layer))
|
|
# Also offer exact escape stubs: a fine-pitch pin's nearby cells can be
|
|
# a pocket inside its own pad that leads nowhere (the grid columns miss
|
|
# the narrow legal band past the pad tip). The stub's length is its
|
|
# cost, so it is only taken where a short step would not do.
|
|
if self._orthogonal and self._crowded(pin, net_no) and self._trapped(pin, net_no, nodes):
|
|
nodes |= self._escape_nodes(pin, net_no, conns, layers, (cx, cy), allow_ripup)
|
|
if not nodes: # nothing clear: fall back to the nearest cell, as before
|
|
nodes = {(cx, cy, layer) for layer in layers}
|
|
if self._keepout_boxes and not any(
|
|
self._stub_clear(pin, (cx, cy), layer, net_no, conns, keepouts_only=True)
|
|
for layer in layers
|
|
):
|
|
# no wire can reach the pin without entering a keepout: the
|
|
# route has to arrive by a via, which goes in the pad
|
|
self._via_only.update(nodes)
|
|
return nodes
|
|
|
|
def _crowded(self, pin: Pin, net_no: int) -> bool:
|
|
"""A pin whose neighbour pad of another net is too close for a trace
|
|
to pass between them: a fine-pitch pin, the case escapes are for."""
|
|
key = (id(pin), net_no)
|
|
cached = self._crowded_cache.get(key)
|
|
if cached is not None:
|
|
return cached
|
|
box = pin.shape.bounding_box() if pin.shape is not None else None
|
|
gap = self.trace_width + 2 * self.clearance
|
|
crowded = False
|
|
if box is not None:
|
|
for other in self.board.get_pins():
|
|
if other is pin or net_no in other.net_nos or other.shape is None:
|
|
continue
|
|
if not set(other.layers) & set(pin.layers):
|
|
continue
|
|
ob = other.shape.bounding_box()
|
|
dx = max(ob.ll.x - box.ur.x, box.ll.x - ob.ur.x, 0)
|
|
dy = max(ob.ll.y - box.ur.y, box.ll.y - ob.ur.y, 0)
|
|
if max(dx, dy) < gap and min(dx, dy) == 0:
|
|
crowded = True
|
|
break
|
|
self._crowded_cache[key] = crowded
|
|
return crowded
|
|
|
|
def _static_open(self, node: Node, net_no: int) -> bool:
|
|
"""Open to ``net_no`` as far as pads and keepouts go (routes ignored)."""
|
|
if node in self._keepout:
|
|
return False
|
|
pads = self._pad_block.get(node)
|
|
return not (pads and any(n != net_no for n in pads) and net_no not in self._pad_own.get(node, ()))
|
|
|
|
def _trapped(self, pin: Pin, net_no: int, nodes: set[Node], limit: int = 60) -> bool:
|
|
"""Whether a pin's nearby cells are a dead-end pocket, judged against
|
|
pads and keepouts only (not other routes), so it is fixed per pin."""
|
|
key = (id(pin), net_no)
|
|
cached = self._trapped_cache.get(key)
|
|
if cached is not None:
|
|
return cached
|
|
seen = set(nodes)
|
|
frontier = list(nodes)
|
|
while frontier and len(seen) < limit:
|
|
x, y, layer = frontier.pop()
|
|
for dx, dy in self._neighbours:
|
|
n = (x + dx, y + dy, layer)
|
|
if n in seen or not (0 <= n[0] < self.cols and 0 <= n[1] < self.rows):
|
|
continue
|
|
if self._static_open(n, net_no):
|
|
seen.add(n)
|
|
frontier.append(n)
|
|
trapped = len(seen) < limit
|
|
self._trapped_cache[key] = trapped
|
|
return trapped
|
|
|
|
def _escape_nodes(
|
|
self, pin: Pin, net_no: int, conns, layers, origin: Cell, allow_ripup: bool = False
|
|
) -> set[Node]:
|
|
"""For a pin walled in on the grid (a fine-pitch pin whose legal band
|
|
the grid columns miss): look along each axis for the first open cell
|
|
whose stub from the pin clears every other net's pad by the full
|
|
clearance, checked on the stub's copper tiles as the exact engine
|
|
will rather than on the grid."""
|
|
from freeroute.geometry.polyline import Polyline, PolylineShape
|
|
|
|
reach = self._escape_cells
|
|
near = [
|
|
(p.shape.bounding_box(), set(p.layers))
|
|
for p in self.board.get_pins()
|
|
if p.shape is not None
|
|
and net_no not in p.net_nos
|
|
and abs(p.location.x - pin.location.x) < (reach + 2) * self.step * 2
|
|
and abs(p.location.y - pin.location.y) < (reach + 2) * self.step * 2
|
|
]
|
|
cx, cy = origin
|
|
nodes: set[Node] = set()
|
|
# the pin's own column or row and the one either side: two pins side
|
|
# by side can then jog apart at the end of their straight exits
|
|
for (dx, dy), side in itertools.product(_NEIGHBOURS[:4], (0, -1, 1)):
|
|
sx, sy = (side, 0) if dx == 0 else (0, side)
|
|
nodes_before = len(nodes)
|
|
for k in range(2, reach + 1):
|
|
cell = (cx + dx * k + sx, cy + dy * k + sy)
|
|
if not (0 <= cell[0] < self.cols and 0 <= cell[1] < self.rows):
|
|
break
|
|
grown = [
|
|
tile.offset(self.clearance)
|
|
for tile in PolylineShape(
|
|
Polyline(self._stub_points(pin.location, cell)), self._cur_half
|
|
).tiles()
|
|
]
|
|
for layer in layers:
|
|
if self._enter_cost(cell, layer, net_no, allow_ripup, conns) is None:
|
|
continue
|
|
if any(
|
|
layer in box_layers and any(g.overlaps(box) for g in grown)
|
|
for box, box_layers in near
|
|
):
|
|
continue
|
|
if self._stub_clear(pin, cell, layer, net_no, conns, allow_ripup=allow_ripup):
|
|
nodes.add((*cell, layer))
|
|
if len(nodes) > nodes_before:
|
|
break # the first open cell along this line is enough
|
|
return nodes
|
|
|
|
def _relax(self, current, nxt, tentative, goal_cell, g_score, came_from, open_heap):
|
|
if tentative < g_score.get(nxt, math.inf):
|
|
came_from[nxt] = current
|
|
g_score[nxt] = tentative
|
|
heapq.heappush(open_heap, (tentative + self._h(nxt, goal_cell), nxt))
|
|
|
|
def _h(self, node: Node, goal_cell: Cell) -> float:
|
|
dx, dy = abs(node[0] - goal_cell[0]), abs(node[1] - goal_cell[1])
|
|
# the tightest estimate the allowed moves admit (Manhattan when only
|
|
# orthogonal steps exist), scaled by heuristic_weight: above 1 the
|
|
# search heads for the goal instead of flooding open board, for a
|
|
# route at most that factor longer than the shortest
|
|
base = dx + dy if self._orthogonal else math.hypot(dx, dy)
|
|
return self.heuristic_weight * base
|
|
|
|
# --- commit / rip -------------------------------------------------------
|
|
|
|
def _commit(self, conn: _Connection, path: list[Node]) -> None:
|
|
conn.path = list(path)
|
|
wire_segs, via_cells = _split_path(path)
|
|
via_cells = list(via_cells)
|
|
if isinstance(conn.a_end, ConductionArea):
|
|
via_cells.append((path[0][0], path[0][1]))
|
|
if isinstance(conn.b_end, ConductionArea):
|
|
via_cells.append((path[-1][0], path[-1][1]))
|
|
conn.trace_cells = [(cell, layer) for layer, cells in wire_segs for cell in cells]
|
|
conn.via_cells = list(via_cells)
|
|
for cell in conn.via_cells:
|
|
count = self._via_nets.setdefault(cell, {})
|
|
count[conn.net_no] = count.get(conn.net_no, 0) + 1
|
|
if conn.via_cells:
|
|
self._via_centres = None
|
|
for cell, layer in conn.trace_cells:
|
|
self._cell_owner[(*cell, layer)] = conn.index
|
|
conn.half = half = self._conn_half(conn)
|
|
halo = self._halo_for(half)
|
|
conn.halo_nodes = []
|
|
for (cx, cy), layer in conn.trace_cells:
|
|
for dx, dy in halo:
|
|
x, y = cx + dx, cy + dy
|
|
if 0 <= x < self.cols and 0 <= y < self.rows:
|
|
node = (x, y, layer)
|
|
self._halo.setdefault(node, []).append(conn.index)
|
|
conn.halo_nodes.append(node)
|
|
conn.via_halo = []
|
|
for cell in conn.via_cells:
|
|
for c in self._via_cells(cell):
|
|
claims = self._via_claims.setdefault(c, [])
|
|
if conn.index not in claims:
|
|
claims.append(conn.index)
|
|
conn.via_halo.append(c)
|
|
self._via_owner.setdefault(c, conn.index)
|
|
ends = ((conn.a_end, wire_segs[0], 0), (conn.b_end, wire_segs[-1], -1)) if wire_segs else ()
|
|
conn.stubs = []
|
|
for pin, (layer, cells), at in ends:
|
|
if not isinstance(pin, Pin):
|
|
continue # ended on a zone or a plane: no stub
|
|
cell = cells[at]
|
|
claimed: set[Node] = set()
|
|
for c in self._stub_cells(pin.location, cell, half):
|
|
node = (*c, layer)
|
|
if node not in self._cell_owner:
|
|
self._cell_owner[node] = conn.index
|
|
conn.trace_cells.append((c, layer))
|
|
claimed.add(node)
|
|
conn.stubs.append((layer, self._stub_tiles(pin.location, cell, half), claimed))
|
|
# A pin inside a wire keepout can only leave by a via. Its stub to the
|
|
# cell centre would be track inside the keepout, so the via goes on
|
|
# the pin itself (a via in its own pad) and the stub is left out.
|
|
in_pad: dict[int, IntPoint] = {}
|
|
if len(wire_segs) > 1:
|
|
for idx, pin in ((0, conn.a_end), (len(wire_segs) - 1, conn.b_end)):
|
|
layer, cells = wire_segs[idx]
|
|
node = (*cells[0], layer)
|
|
walled = node in self._keepout or node in self._via_only
|
|
if isinstance(pin, Pin) and len(cells) == 1 and walled:
|
|
in_pad[idx] = pin.location
|
|
conn.wires = []
|
|
for idx, (layer, cells) in enumerate(wire_segs):
|
|
if idx in in_pad:
|
|
continue
|
|
points = [self._cell_center(c) for c in cells]
|
|
if idx == 0 and isinstance(conn.a_end, Pin):
|
|
points[0:0] = self._stub_points(conn.a_end.location, cells[0])[:-1]
|
|
if idx == len(wire_segs) - 1 and isinstance(conn.b_end, Pin):
|
|
points.extend(self._stub_points(conn.b_end.location, cells[-1])[-2::-1])
|
|
points = _simplify(points)
|
|
if len(points) >= 2:
|
|
conn.wires.append((layer, points))
|
|
conn.vias = [self._cell_center(c) for c in conn.via_cells]
|
|
for idx, location in in_pad.items():
|
|
# via k joins wire segments k and k + 1
|
|
conn.vias[0 if idx == 0 else idx - 1] = location
|
|
conn.routed = True
|
|
self._settle(conn, -1)
|
|
|
|
def _rip(self, conn: _Connection) -> None:
|
|
for cell, layer in conn.trace_cells:
|
|
if self._cell_owner.get((*cell, layer)) == conn.index:
|
|
del self._cell_owner[(*cell, layer)]
|
|
for cell in conn.via_halo:
|
|
claims = self._via_claims.get(cell)
|
|
if claims is not None and conn.index in claims:
|
|
claims.remove(conn.index)
|
|
if self._via_owner.get(cell) == conn.index:
|
|
if claims:
|
|
self._via_owner[cell] = claims[0]
|
|
else:
|
|
del self._via_owner[cell]
|
|
if claims is not None and not claims:
|
|
del self._via_claims[cell]
|
|
conn.via_halo = []
|
|
for node in conn.halo_nodes:
|
|
claims = self._halo.get(node)
|
|
if claims is not None:
|
|
claims.remove(conn.index)
|
|
if not claims:
|
|
del self._halo[node]
|
|
conn.halo_nodes = []
|
|
conn.trace_cells = []
|
|
conn.stubs = []
|
|
for cell in conn.via_cells:
|
|
count = self._via_nets.get(cell)
|
|
if count and count.get(conn.net_no):
|
|
count[conn.net_no] -= 1
|
|
if conn.via_cells:
|
|
self._via_centres = None
|
|
conn.via_cells = []
|
|
conn.wires = []
|
|
conn.vias = []
|
|
conn.routed = False
|
|
conn.rip_count += 1
|
|
self._settle(conn, +1)
|
|
|
|
def _crossed_owners(
|
|
self, path: list[Node], net_no: int, conns: list[_Connection], spread=None
|
|
) -> set[int]:
|
|
"""Connections whose copper or clearance ``path`` crosses; a trace
|
|
wider than the default crosses them on its ``spread`` cells too."""
|
|
spread = self._spread if spread is None else spread
|
|
if spread:
|
|
path = list(
|
|
dict.fromkeys(
|
|
(x + dx, y + dy, layer)
|
|
for x, y, layer in path
|
|
for dx, dy in ((0, 0), *spread)
|
|
)
|
|
)
|
|
owners: set[int] = set()
|
|
for cx, cy, cl in path:
|
|
owner = self._cell_owner.get((cx, cy, cl))
|
|
if owner is not None and conns[owner].net_no != net_no:
|
|
owners.add(owner)
|
|
via_owner = self._via_owner.get((cx, cy))
|
|
if via_owner is not None and conns[via_owner].net_no != net_no:
|
|
owners.add(via_owner)
|
|
for i in self._halo.get((cx, cy, cl), ()):
|
|
if conns[i].net_no != net_no:
|
|
owners.add(i)
|
|
return owners
|
|
|
|
# --- pin access ---------------------------------------------------------
|
|
|
|
@staticmethod
|
|
def _group_pins(conn: _Connection):
|
|
return [*conn.a_group[0], *conn.b_group[0]]
|
|
|
|
def _build_doorways(self, conns: list[_Connection]) -> None:
|
|
"""Map every cell that would close a pin's way out to that pin."""
|
|
spread = [(0, 0), *self._halo_offsets]
|
|
done: set[int] = set()
|
|
for conn in conns:
|
|
for pin in self._group_pins(conn):
|
|
self._pending[id(pin)] = self._pending.get(id(pin), 0) + 1
|
|
if id(pin) in done:
|
|
continue
|
|
done.add(id(pin))
|
|
claim = (id(pin), conn.net_no)
|
|
exits: set[Node] = set()
|
|
for x, y, layer in self._end_nodes(pin, conn.net_no, conns):
|
|
exits.add((x, y, layer))
|
|
for c in self._via_cells((x, y)):
|
|
exits.update((*c, other) for other in self.layers)
|
|
cells: set[Node] = set()
|
|
for x, y, layer in exits:
|
|
for dx, dy in spread:
|
|
if 0 <= x + dx < self.cols and 0 <= y + dy < self.rows:
|
|
cells.add((x + dx, y + dy, layer))
|
|
for node in cells:
|
|
self._doorways.setdefault(node, []).append(claim)
|
|
|
|
def _settle(self, conn: _Connection, delta: int) -> None:
|
|
if not self._pending:
|
|
return
|
|
for pin in self._group_pins(conn):
|
|
if id(pin) in self._pending:
|
|
self._pending[id(pin)] += delta
|
|
|
|
def _access(self, node: Node, net_no: int) -> float:
|
|
"""Extra cost for ``net_no`` to use a cell another pin still needs."""
|
|
for pin_id, owner_net in self._doorways.get(node, ()):
|
|
if owner_net != net_no and self._pending.get(pin_id, 0) > 0:
|
|
return self.access_cost
|
|
return 0.0
|
|
|
|
# --- passes -------------------------------------------------------------
|
|
|
|
def route(self) -> RouteResult:
|
|
"""Route all ratsnest connections, using rip-up-and-retry across passes."""
|
|
conns = self._build_connections()
|
|
self._conns = conns
|
|
if not conns:
|
|
return RouteResult(self.half_width)
|
|
if self.access_cost:
|
|
self._build_doorways(conns)
|
|
|
|
passes = self.max_passes if self.rip_up else 1
|
|
best_count = -1
|
|
best_snapshot: list[tuple[int, list, list]] | None = None
|
|
best_unrouted = len(conns)
|
|
best_widths: tuple[dict[int, int], list] = ({}, [])
|
|
# conns[i].index == i is what rip-up relies on, so shuffle a view
|
|
order = list(conns)
|
|
if self.seed is not None:
|
|
random.Random(self.seed).shuffle(order)
|
|
if self.route_first:
|
|
# stable: the promoted keep their order among themselves, as do the rest
|
|
order.sort(key=lambda c: (c.net_no, *_ends_of(c)) not in self.route_first)
|
|
for _ in range(passes):
|
|
changed = False
|
|
for conn in order:
|
|
if conn.routed:
|
|
continue
|
|
if self._try_route(conn, conns):
|
|
changed = True
|
|
routed_count = sum(1 for c in conns if c.routed)
|
|
if routed_count > best_count:
|
|
best_count = routed_count
|
|
best_unrouted = len(conns) - routed_count
|
|
best_snapshot = self._snapshot(conns)
|
|
best_widths = self._net_widths(conns)
|
|
if routed_count == len(conns):
|
|
break
|
|
if not changed:
|
|
break
|
|
result = self._result_from(best_snapshot or [], best_unrouted)
|
|
result.net_half, result.narrowed = best_widths
|
|
return result
|
|
|
|
def _try_route(self, conn: _Connection, conns: list[_Connection]) -> bool:
|
|
if self._route_once(conn, conns):
|
|
return True
|
|
if conn.narrow or conn.net_no not in self._net_half:
|
|
return False
|
|
# a wider class that does not fit: route it at the default width
|
|
conn.narrow = True
|
|
return self._route_once(conn, conns)
|
|
|
|
def _route_once(self, conn: _Connection, conns: list[_Connection]) -> bool:
|
|
path = self._search(conn, allow_ripup=False, conns=conns)
|
|
if path is None:
|
|
if not self.rip_up:
|
|
return False
|
|
path = self._search(conn, allow_ripup=True, conns=conns)
|
|
if path is None:
|
|
return False
|
|
crossed = self._crossed_owners(
|
|
path, conn.net_no, conns, self._spread_for(self._conn_half(conn))
|
|
)
|
|
# and the routes on the stubs from the pins to the path's ends
|
|
for end, node in ((conn.a_end, path[0]), (conn.b_end, path[-1])):
|
|
if isinstance(end, Pin):
|
|
crossed |= self._stub_owners(
|
|
end, node[:2], node[2], conn.net_no, conns, self._conn_half(conn)
|
|
)
|
|
victims = [conns[i] for i in sorted(crossed)]
|
|
if self.rollback:
|
|
return self._ripup_transaction(conn, path, victims, conns)
|
|
for victim in victims:
|
|
self._rip(victim)
|
|
self._commit(conn, path)
|
|
return True
|
|
|
|
def _ripup_transaction(self, conn, path, victims, conns) -> bool:
|
|
"""Route ``conn`` through ``victims``, reroute them at once in free
|
|
space, and undo it all if fewer connections end up routed."""
|
|
saved = [(v, v.path, v.a_end, v.b_end, v.rip_count) for v in victims]
|
|
own_rips = conn.rip_count
|
|
for victim in victims:
|
|
self._rip(victim)
|
|
self._commit(conn, path)
|
|
rerouted = 0
|
|
for victim in victims:
|
|
again = self._search(victim, allow_ripup=False, conns=conns)
|
|
if again is not None:
|
|
self._commit(victim, again)
|
|
rerouted += 1
|
|
if 1 + rerouted >= len(victims):
|
|
return True # a gain, or an even trade that may pay off later
|
|
for victim in victims:
|
|
if victim.routed:
|
|
self._rip(victim)
|
|
self._rip(conn)
|
|
conn.rip_count = own_rips
|
|
for victim, old_path, a_end, b_end, rips in saved:
|
|
victim.a_end, victim.b_end = a_end, b_end
|
|
self._commit(victim, old_path)
|
|
victim.rip_count = rips
|
|
return False
|
|
|
|
def _build_connections(self) -> list[_Connection]:
|
|
pins_by_net = self._pins_by_net()
|
|
zones_by_net: dict[int, list] = {}
|
|
self._every_zone_by_net: dict[int, list] = {}
|
|
for zone in self.board.get_conduction_areas():
|
|
if zone.layer in self.layers and zone.net_nos:
|
|
self._every_zone_by_net.setdefault(zone.net_nos[0], []).append(zone)
|
|
for zone in self.board.get_conduction_areas():
|
|
if zone.layer in self.layers and zone.net_nos and self._zone_is_solid(zone):
|
|
zones_by_net.setdefault(zone.net_nos[0], []).append(zone)
|
|
# planes: zones of a net on an inner power layer, solid by construction
|
|
planes_by_net: dict[int, list] = {}
|
|
for zone in self.board.get_conduction_areas():
|
|
if zone.net_nos and zone.layer in self._power_layers:
|
|
planes_by_net.setdefault(zone.net_nos[0], []).append(zone)
|
|
plane_ids = frozenset(id(z) for zs in planes_by_net.values() for z in zs)
|
|
conns: list[_Connection] = []
|
|
nets = set(pins_by_net) | set(zones_by_net) | set(planes_by_net)
|
|
# deterministic: fewer-pin nets first, then by net number
|
|
for net_no in sorted(nets, key=lambda n: (len(pins_by_net.get(n, [])), n)):
|
|
zones = zones_by_net.get(net_no, []) + planes_by_net.get(net_no, [])
|
|
groups = _connected_groups(
|
|
pins_by_net.get(net_no, []), zones, plane_ids, self._fixed_pieces(net_no)
|
|
)
|
|
hubs = [g for g in groups if any(id(z) in plane_ids for z in g[1])]
|
|
if hubs:
|
|
# a plane net: every other group goes straight to the plane
|
|
# (usually a stub and a via), not pad to pad across the board
|
|
pairs = [(g, hubs[0]) for g in groups if g is not hubs[0]]
|
|
else:
|
|
pairs = list(zip(groups, groups[1:], strict=False))
|
|
for ga, gb in pairs:
|
|
conn = _Connection(len(conns), net_no, _first(ga[0]), _first(gb[0]))
|
|
conn.a_group, conn.b_group = ga, gb
|
|
conns.append(conn)
|
|
return conns
|
|
|
|
def _fixed_pieces(self, net_no: int) -> list[_FixedPiece]:
|
|
"""The net's tracks and vias already on the board, as connectivity."""
|
|
cache = getattr(self, "_fixed_cache", None)
|
|
if cache is None:
|
|
from freeroute.board.items import Trace
|
|
from freeroute.geometry.polyline import Polyline, PolylineShape, corner_box
|
|
|
|
cache = self._fixed_cache = {}
|
|
for item in self.board.get_items():
|
|
if not item.fixed or not item.net_nos:
|
|
continue
|
|
if isinstance(item, Via) and item.shape is not None:
|
|
piece = _FixedPiece(item.layers, [item.shape.bounding_box()], via=item)
|
|
elif isinstance(item, Trace) and not item.is_empty():
|
|
boxes = list(PolylineShape(Polyline(item.corners), item.half_width).tiles())
|
|
boxes += [corner_box(e, item.half_width) for e in (item.corners[0], item.corners[-1])]
|
|
piece = _FixedPiece([item.layer], boxes)
|
|
else:
|
|
continue
|
|
cache.setdefault(item.net_nos[0], []).append(piece)
|
|
return cache.get(net_no, [])
|
|
|
|
def _pins_by_net(self) -> dict[int, list[Pin]]:
|
|
by_net: dict[int, list[Pin]] = {}
|
|
for pin in self.board.get_pins():
|
|
if not any(layer in self.layers for layer in pin.layers):
|
|
continue
|
|
for net_no in pin.net_nos:
|
|
by_net.setdefault(net_no, []).append(pin)
|
|
return by_net
|
|
|
|
def _net_widths(self, conns: list[_Connection]) -> tuple[dict[int, int], list]:
|
|
"""Half width of each wider-class net whose routed connections all went
|
|
in at it (a net is written at one width), and the connections that
|
|
had to fall back to the default."""
|
|
halves: dict[int, int] = {}
|
|
narrowed = []
|
|
for c in conns:
|
|
if not c.routed:
|
|
continue
|
|
halves[c.net_no] = min(halves.get(c.net_no, c.half), c.half)
|
|
if c.narrow:
|
|
narrowed.append((c.net_no, *_ends_of(c)))
|
|
wide = {net: half for net, half in halves.items() if half > self.half_width}
|
|
return wide, narrowed
|
|
|
|
def _snapshot(self, conns: list[_Connection]) -> list[tuple]:
|
|
return [
|
|
(c.net_no, [(layer, list(pts)) for layer, pts in c.wires], list(c.vias),
|
|
(*_ends_of(c), self._left_to_zone(c)))
|
|
for c in conns
|
|
if c.routed
|
|
]
|
|
|
|
def _result_from(self, snapshot, unrouted: int) -> RouteResult:
|
|
result = RouteResult(self.half_width)
|
|
written: set[tuple[int, IntPoint]] = set()
|
|
result.unrouted = unrouted
|
|
for net_no, wires, vias, ends in snapshot:
|
|
for layer, points in wires:
|
|
result.add_wire(net_no, layer, points)
|
|
for location in vias:
|
|
spot = (net_no, location)
|
|
if spot in written or spot in self._fixed_via_points:
|
|
continue # a via reused by another connection, or already on the board
|
|
written.add(spot)
|
|
result.add_via(net_no, location)
|
|
result.connections.append((net_no, wires, vias))
|
|
result.connection_ends.append(ends)
|
|
routed = {ends[:2] + (net_no,) for net_no, _w, _v, ends in snapshot}
|
|
result.failed = [
|
|
(c.net_no, *_ends_of(c), self._left_to_zone(c))
|
|
for c in self._conns
|
|
if _ends_of(c) + (c.net_no,) not in routed
|
|
]
|
|
return result
|
|
|
|
|
|
def _first(items):
|
|
return items[0] if items else None
|
|
|
|
|
|
def _group_label(group) -> str:
|
|
pins, zones = group
|
|
parts = [f"{p.component_ref}-{p.name}" for p in pins[:3]]
|
|
if len(pins) > 3:
|
|
parts.append(f"+{len(pins) - 3} pins")
|
|
parts += [f"zone {z.name}" for z in zones[:1]]
|
|
return "/".join(parts) or "?"
|
|
|
|
|
|
def _ends_of(conn) -> tuple[str, str]:
|
|
"""A readable description of what a connection joins."""
|
|
return _group_label(conn.a_group), _group_label(conn.b_group)
|
|
|
|
|
|
def _pin_touches_zone(pin: Pin, zone, plane: bool = False) -> bool:
|
|
"""A pad on the zone's layer whose centre or a corner lies in the zone.
|
|
|
|
For a plane on an inner power layer: a through-hole pad (on more than one
|
|
copper layer) inside it passes through the plane and is joined to it; an
|
|
SMD pad is not, and needs a via.
|
|
"""
|
|
if plane:
|
|
return len(pin.layers) > 1 and zone.polygon is not None and zone.polygon.contains(pin.location)
|
|
if zone.layer not in pin.layers or zone.polygon is None:
|
|
return False
|
|
if zone.polygon.contains(pin.location):
|
|
return True
|
|
box = pin.shape.bounding_box() if pin.shape is not None else None
|
|
if box is None:
|
|
return False
|
|
corners = (box.ll, IntPoint(box.ur.x, box.ll.y), box.ur, IntPoint(box.ll.x, box.ur.y))
|
|
return any(zone.polygon.contains(c) for c in corners)
|
|
|
|
|
|
def _touches(a: IntBox, b: IntBox) -> bool:
|
|
return not (a.ur.x < b.ll.x or b.ur.x < a.ll.x or a.ur.y < b.ll.y or b.ur.y < a.ll.y)
|
|
|
|
|
|
def _fixed_joins_zone(piece, zone, plane: bool) -> bool:
|
|
"""A through via inside a plane joins it; copper inside a zone on its
|
|
own layer joins that zone."""
|
|
if zone.polygon is None:
|
|
return False
|
|
if piece.via is not None:
|
|
if plane or zone.layer in piece.layers:
|
|
return zone.polygon.contains(piece.via.location)
|
|
return False
|
|
return zone.layer in piece.layers and any(
|
|
zone.polygon.contains(IntPoint((b.ll.x + b.ur.x) // 2, (b.ll.y + b.ur.y) // 2))
|
|
for b in piece.boxes
|
|
)
|
|
|
|
|
|
class _FixedPiece:
|
|
"""One track or via already on the board, as connectivity."""
|
|
|
|
__slots__ = ("layers", "boxes", "via")
|
|
|
|
def __init__(self, layers, boxes, via=None) -> None:
|
|
self.layers = frozenset(layers)
|
|
self.boxes = boxes
|
|
self.via = via # the Via item, for a via
|
|
|
|
|
|
def _connected_groups(
|
|
pins: list[Pin], zones: list, planes: frozenset = frozenset(), fixed: list | None = None
|
|
) -> list[tuple[list[Pin], list]]:
|
|
"""Pins and zones of one net that copper already joins: a pad in a zone
|
|
is connected to it, two zones sharing a pad are one, and copper already
|
|
on the board (tracks and vias, ``fixed``) joins whatever it touches. Only
|
|
the groups need routing between them. Pin groups come first, in pin
|
|
order. A group's fixed vias join its pins as extra route ends, so a
|
|
fanned-out pin is routed from its via; copper that touches no pin and no
|
|
zone adds nothing to route."""
|
|
fixed = fixed or []
|
|
n_pins, n_zones = len(pins), len(zones)
|
|
parent = list(range(n_pins + n_zones + len(fixed)))
|
|
|
|
def find(i: int) -> int:
|
|
while parent[i] != i:
|
|
parent[i] = parent[parent[i]]
|
|
i = parent[i]
|
|
return i
|
|
|
|
for j, zone in enumerate(zones):
|
|
for i, pin in enumerate(pins):
|
|
if _pin_touches_zone(pin, zone, id(zone) in planes):
|
|
parent[find(i)] = find(len(pins) + j)
|
|
base = n_pins + n_zones
|
|
for k, piece in enumerate(fixed):
|
|
me = base + k
|
|
for i, pin in enumerate(pins):
|
|
if pin.shape is None or not piece.layers & set(pin.layers):
|
|
continue
|
|
pad = pin.shape.bounding_box()
|
|
if any(_touches(pad, b) for b in piece.boxes):
|
|
parent[find(i)] = find(me)
|
|
for j, zone in enumerate(zones):
|
|
if _fixed_joins_zone(piece, zone, id(zone) in planes):
|
|
parent[find(n_pins + j)] = find(me)
|
|
for k2 in range(k):
|
|
other = fixed[k2]
|
|
if piece.layers & other.layers and any(
|
|
_touches(a, b) for a in piece.boxes for b in other.boxes
|
|
):
|
|
parent[find(base + k2)] = find(me)
|
|
groups: dict[int, tuple[list[Pin], list]] = {}
|
|
order: list[int] = []
|
|
for i, pin in enumerate(pins):
|
|
root = find(i)
|
|
if root not in groups:
|
|
groups[root] = ([], [])
|
|
order.append(root)
|
|
groups[root][0].append(pin)
|
|
for j, zone in enumerate(zones):
|
|
root = find(len(pins) + j)
|
|
if root not in groups:
|
|
groups[root] = ([], [])
|
|
order.append(root)
|
|
groups[root][1].append(zone)
|
|
for k, piece in enumerate(fixed):
|
|
root = find(base + k)
|
|
if piece.via is not None and root in groups:
|
|
groups[root][0].append(_via_end(piece.via))
|
|
return [groups[r] for r in order]
|
|
|
|
|
|
def _via_end(via) -> Pin:
|
|
"""A fixed via as a place a route may start or end (not a pad to route)."""
|
|
return Pin(
|
|
net_nos=list(via.net_nos), fixed=True, name="via", component_ref="",
|
|
padstack_name=via.padstack_name, location=via.location,
|
|
layers=list(via.layers), shape=via.shape,
|
|
)
|
|
|
|
|
|
def _split_path(path: list[Node]) -> tuple[list[tuple[int, list[Cell]]], list[Cell]]:
|
|
"""Split a node path into per-layer wire segments and via cells."""
|
|
wires: list[tuple[int, list[Cell]]] = []
|
|
vias: list[Cell] = []
|
|
i = 0
|
|
n = len(path)
|
|
while i < n:
|
|
layer = path[i][2]
|
|
cells: list[Cell] = []
|
|
while i < n and path[i][2] == layer:
|
|
cells.append((path[i][0], path[i][1]))
|
|
i += 1
|
|
wires.append((layer, cells))
|
|
if i < n: # a via connects this segment's last cell to the next layer
|
|
vias.append(cells[-1])
|
|
return wires, vias
|
|
|
|
|
|
def _reconstruct(came_from: dict[Node, Node], current: Node) -> list[Node]:
|
|
path = [current]
|
|
while current in came_from:
|
|
current = came_from[current]
|
|
path.append(current)
|
|
path.reverse()
|
|
return path
|
|
|
|
|
|
def _simplify(points: list[IntPoint]) -> list[IntPoint]:
|
|
"""Drop duplicate and collinear points from a polyline."""
|
|
out: list[IntPoint] = []
|
|
for p in points:
|
|
if out and out[-1].x == p.x and out[-1].y == p.y:
|
|
continue
|
|
if len(out) >= 2:
|
|
a, b = out[-2], out[-1]
|
|
if (b.x - a.x) * (p.y - a.y) - (b.y - a.y) * (p.x - a.x) == 0:
|
|
out[-1] = p
|
|
continue
|
|
out.append(p)
|
|
return out
|
|
|
|
|
|
def route_board(
|
|
board: BasicBoard,
|
|
*,
|
|
trace_width: int,
|
|
clearance: int,
|
|
layers: list[int] | None = None,
|
|
via_cost: float = 10.0,
|
|
rip_up: bool = True,
|
|
max_passes: int = 10,
|
|
orthogonal: bool = False,
|
|
via_half: int | None = None,
|
|
edge_clearance: int | None = None,
|
|
resolution: int = 1,
|
|
heuristic_weight: float = 1.0,
|
|
seed: int | None = None,
|
|
route_first: frozenset | None = None,
|
|
access_cost: float = 0.0,
|
|
rollback: bool = True,
|
|
net_widths: dict[int, int] | None = None,
|
|
via_drill: int | None = None,
|
|
hole_to_hole: int = 0,
|
|
) -> RouteResult:
|
|
"""Convenience wrapper: build a :class:`GridRouter` and route the board."""
|
|
router = GridRouter(
|
|
board,
|
|
trace_width=trace_width,
|
|
clearance=clearance,
|
|
layers=layers,
|
|
via_cost=via_cost,
|
|
rip_up=rip_up,
|
|
max_passes=max_passes,
|
|
orthogonal=orthogonal,
|
|
via_half=via_half,
|
|
edge_clearance=edge_clearance,
|
|
resolution=resolution,
|
|
heuristic_weight=heuristic_weight,
|
|
seed=seed,
|
|
route_first=route_first,
|
|
access_cost=access_cost,
|
|
rollback=rollback,
|
|
net_widths=net_widths,
|
|
via_drill=via_drill,
|
|
hole_to_hole=hole_to_hole,
|
|
)
|
|
return router.route()
|