Window boards: never search a connection ending outside the window

With items away from the window left off its board, a stub from the window
edge out to a rerouted net's far pin crossed copper the exact check never
saw: 38 shorts on th-eda's flight controller. A connection with an end
outside the bounds is now left unrouted, and a window whose new copper
leaves the window is refused.

bench/diagnose.py

@@ -32,8 +32,10 @@ from freeroute.route.exact_router import route_board_exact
 from freeroute.route.grid_router import GridRouter, _ends_of
 from freeroute.route.pipeline import (
     _mm_to_board,
+    _net_widths_board,
     _rule_clearance_dsn,
     _rule_width_dsn,
+    _via_drill_board,
     _via_half_board,
 )
 
@@ -183,7 +185,8 @@ def _flood(router: GridRouter, pin, net_no: int, conns) -> tuple[int, Counter]:
 
 def diagnose(
     dsn_text: str, edge_clearance_mm: float | None, resolution: int = 2, shove: bool = False,
-    access_cost: float = 0.0,
+    access_cost: float = 0.0, hole_to_hole_mm: float = 0.25, seed: int | None = None,
+    negotiate: int = 0,
 ) -> dict:
     dsn = parse_dsn(dsn_text)
     names = {i + 1: n.name for i, n in enumerate(dsn.nets)}
@@ -199,6 +202,12 @@ def diagnose(
         resolution=resolution,
         shove=shove,
         access_cost=access_cost,
+        seed=seed,
+        negotiate=negotiate,
+        # the product's configuration: net-class widths and hole spacing
+        net_widths=_net_widths_board(dsn, scale),
+        via_drill=_via_drill_board(dsn, scale),
+        hole_to_hole=_mm_to_board(dsn, scale, hole_to_hole_mm) or 0,
     )
     routed = seen["router"]
     best = routed._diag_best
@@ -206,6 +215,8 @@ def diagnose(
 
     # the board as the best pass left it
     state = _fresh(seen)
+    # pins on turned pads leave along their pad's axis: replay with the same exits
+    state._axis_exits = dict(routed._axis_exits)
     conns = state._conns
     for idx, (path, a_end, b_end) in best.items():
         conns[idx].a_end, conns[idx].b_end = a_end, b_end
@@ -270,11 +281,14 @@ def main(argv: list[str] | None = None) -> int:
     ap.add_argument("--grid-resolution", type=int, default=2, metavar="K")
     ap.add_argument("--shove", action="store_true", help="as mckicad routes")
     ap.add_argument("--access-cost", type=float, default=0.0)
+    ap.add_argument("--seed", type=int, help="route in this shuffled order, as bench.py does")
+    ap.add_argument("--negotiate", type=int, default=0, metavar="N", help="as the router's --negotiate")
+    ap.add_argument("--hole-to-hole", type=float, default=0.25, metavar="MM")
     ap.add_argument("--json", type=Path, help="also write the full table here")
     args = ap.parse_args(argv)
 
     report = diagnose(args.dsn.read_text(), args.edge_clearance, args.grid_resolution, args.shove,
-                      args.access_cost)
+                      args.access_cost, args.hole_to_hole, args.seed, args.negotiate)
     for row in report["failures"]:
         extra = ""
         for w in row.get("walled", []):

bench/drc_check.sh

@@ -0,0 +1,67 @@
+#!/usr/bin/env bash
+# Route one KiCad board with freeroute and judge the result with KiCad's DRC.
+#
+#   bench/drc_check.sh [--keep] <board.kicad_pcb> <out-dir> [freeroute args...]
+#
+# Copies the board (and its .kicad_pro) into <out-dir>, strips its tracks and
+# vias unless --keep is given (then they reach the router as fixed wiring),
+# exports the DSN through mckicad, routes, applies the session, and runs DRC
+# with zones refilled at every severity. Prints one line: time, copper added,
+# shorts, opens, hole problems (whatever severity the board gives them) and
+# the other errors. The source board is never touched.
+#
+# FREEROUTE (default: this checkout's .venv/bin/freeroute) and MCK (default
+# ~/claude/mckicad) pick the builds to judge.
+set -euo pipefail
+keep=0
+if [[ "${1:-}" == "--keep" ]]; then keep=1; shift; fi
+src="$1"; out="$2"; shift 2
+here="$(cd "$(dirname "$0")/.." && pwd)"
+FREEROUTE="${FREEROUTE:-$here/.venv/bin/freeroute}"
+MCK="${MCK:-$HOME/claude/mckicad}"
+rm -rf "$out"; mkdir -p "$out"
+cp "${src%.kicad_pcb}.kicad_pro" "$out/board.kicad_pro" 2>/dev/null || true
+
+if [[ $keep == 1 ]]; then
+    cp "$src" "$out/board.kicad_pcb"
+else
+    (cd "$MCK" && uv run --no-sync python - "$src" "$out/board.kicad_pcb" <<'EOF'
+import sys
+from mckicad.utils.sexp_tree import parse
+text = open(sys.argv[1]).read()
+spans = sorted((c.span for c in parse(text).children if c.tag in ("segment", "arc", "via")), reverse=True)
+for a, b in spans:
+    text = text[:a] + text[b:]
+open(sys.argv[2], "w").write(text)
+EOF
+    )
+fi
+
+(cd "$MCK" && uv run --no-sync python -c "
+from mckicad.utils.freerouting import FreeRoutingEngine
+assert FreeRoutingEngine().export_dsn_from_kicad('$out/board.kicad_pcb', '$out/board.dsn', {})") \
+    >/dev/null 2>&1 || { echo "$out: DSN export failed"; exit 1; }
+
+start=$(date +%s.%N)
+"$FREEROUTE" "$out/board.dsn" -do "$out/board.ses" "$@" >"$out/route.log" 2>&1 || true
+secs=$(python3 -c "print(round($(date +%s.%N)-$start,1))")
+[[ -s "$out/board.ses" ]] || { echo "$out: no session ($(tail -1 "$out/route.log"))"; exit 1; }
+
+(cd "$MCK" && uv run --no-sync python -c "
+from mckicad.utils.ses_apply import apply_ses_to_board as a
+r = a('$out/board.kicad_pcb', '$out/board.ses', '$out/board.kicad_pcb')
+print(r['segments_added'], r['vias_added'])" 2>/dev/null) >"$out/apply.txt"
+
+kicad-cli pcb drc --refill-zones --format json --severity-all \
+    -o "$out/drc.json" "$out/board.kicad_pcb" >/dev/null 2>&1 || true
+python3 - "$out" "$secs" <<'EOF'
+import collections, json, sys
+out, secs = sys.argv[1:]
+seg, via = open(f"{out}/apply.txt").read().split()
+d = json.load(open(f"{out}/drc.json"))
+errors = collections.Counter(v["type"] for v in d["violations"] if v.get("severity") == "error")
+other = collections.Counter(v["type"] for v in d["violations"] if v.get("severity") != "error")
+holes = {k: errors.pop(k, 0) + other.get(k, 0) for k in ("holes_co_located", "hole_to_hole")}
+print(f"{out}: {secs}s  {seg} seg {via} via  shorts {errors.pop('shorting_items', 0)}  "
+      f"opens {len(d.get('unconnected_items', []))}  holes {holes}  errors {dict(errors)}")
+EOF

src/freeroute/board/build.py

@@ -12,9 +12,10 @@ model. It mirrors what FreeRouting's ``Structure.create_board`` / ``Library`` /
 * padstacks x placement -> :class:`Pin` items
 * keepouts -> :class:`ObstacleArea` items
 
-Pad geometry: a rectangle pad becomes an exact :class:`IntBox`; a circle pad its
-bounding box (documented approximation pending an exact circle tile); a convex
-polygon pad an exact :class:`Simplex`. Every pad is placed centred on its pin
+Pad geometry: a rectangle pad becomes an exact :class:`IntBox`; a circle pad a
+16-sided :class:`Simplex` drawn just outside it (its corners stand out by 2% of
+the radius, where the bounding box's stood out by 41%); a convex polygon pad an
+exact :class:`Simplex`. Every pad is placed centred on its pin
 location, so it contains that location by construction. Component rotation is
 applied to the pin position; the pad tile itself is not rotated (irrelevant to
 the containment invariant, and pads are centre-symmetric in practice).
@@ -249,7 +250,7 @@ def _placed_pad_tile(shape: Shape, place, dsn_pin, transform: CoordinateTransfor
         r = round(transform.dsn_to_board(shape.diameter / 2))
         cx = round(transform.dsn_to_board(centre.x))
         cy = round(transform.dsn_to_board(centre.y))
-        return IntBox(cx - r, cy - r, cx + r, cy + r)
+        return _circle_tile(cx, cy, r)
     if isinstance(shape, Rectangle):
         x0, y0, x1, y1 = shape.coords[:4]
         corners = [(x0, y0), (x1, y0), (x1, y1), (x0, y1)]
@@ -268,15 +269,65 @@ def _placed_pad_tile(shape: Shape, place, dsn_pin, transform: CoordinateTransfor
     for x, y in corners:
         p = _to_board_offset(place, x, y, dsn_pin.rotation)
         pts.append(IntPoint(round(transform.dsn_to_board(p.x)), round(transform.dsn_to_board(p.y))))
-    if len(pts) >= 3:
-        simplex = Simplex.from_corners(pts)
-        if not simplex.is_empty():
-            return simplex
+    # An oval's padded corners are not in outline order, and a mirrored
+    # part reverses the winding: take the convex hull, then either winding.
+    hull = _convex_hull(pts)
+    if len(hull) >= 3:
+        for corners in (hull, hull[::-1]):
+            simplex = Simplex.from_corners(corners)
+            if not simplex.is_empty():
+                return simplex
     xs = [p.x for p in pts] or [0]
     ys = [p.y for p in pts] or [0]
     return IntBox(min(xs), min(ys), max(xs), max(ys))
 
 
+_CIRCLE_SIDES = 16
+
+
+def _circle_tile(cx: int, cy: int, r: int):
+    """A polygon around the circle, every side touching it. A square around a
+    big round pad (a mounting hole) puts phantom copper in its corners that
+    blocks legal routes past it; this stays outside the circle, so the router
+    is still never closer than KiCad measures."""
+    if r < 8:
+        return IntBox(cx - r, cy - r, cx + r, cy + r)
+    reach = r / math.cos(math.pi / _CIRCLE_SIDES)
+    corners = []
+    for k in range(_CIRCLE_SIDES):
+        a = (k + 0.5) * 2 * math.pi / _CIRCLE_SIDES
+        dx, dy = reach * math.cos(a), reach * math.sin(a)
+        # round away from the centre so the polygon never cuts into the circle
+        corners.append(IntPoint(cx + math.copysign(math.ceil(abs(dx)), dx),
+                                cy + math.copysign(math.ceil(abs(dy)), dy)))
+    corners = [IntPoint(int(p.x), int(p.y)) for p in corners]
+    for winding in (corners, corners[::-1]):
+        simplex = Simplex.from_corners(winding)
+        if not simplex.is_empty():
+            return simplex
+    return IntBox(cx - r, cy - r, cx + r, cy + r)
+
+
+def _convex_hull(pts: list[IntPoint]) -> list[IntPoint]:
+    """The convex hull of ``pts`` counter-clockwise, collinear points dropped."""
+    ps = sorted({(p.x, p.y) for p in pts})
+    if len(ps) < 3:
+        return [IntPoint(x, y) for x, y in ps]
+
+    def cross(o, a, b):
+        return (a[0] - o[0]) * (b[1] - o[1]) - (a[1] - o[1]) * (b[0] - o[0])
+
+    def half(points):
+        out: list[tuple[int, int]] = []
+        for p in points:
+            while len(out) >= 2 and cross(out[-2], out[-1], p) <= 0:
+                out.pop()
+            out.append(p)
+        return out[:-1]
+
+    return [IntPoint(x, y) for x, y in half(ps) + half(ps[::-1])]
+
+
 def _pad_tile(shape: Shape, transform: CoordinateTransform):
     """A board-relative pad tile from a DSN padstack shape (centred near origin)."""
     if isinstance(shape, Rectangle):
@@ -286,7 +337,7 @@ def _pad_tile(shape: Shape, transform: CoordinateTransform):
         r = round(transform.dsn_to_board(shape.diameter / 2))
         cx = round(transform.dsn_to_board(shape.center_x))
         cy = round(transform.dsn_to_board(shape.center_y))
-        return IntBox(cx - r, cy - r, cx + r, cy + r)  # bounding-box approximation
+        return _circle_tile(cx, cy, r)
     if isinstance(shape, (Polygon, Path)):
         coords = shape.coords
         pts = [

src/freeroute/board/search_tree.py

@@ -18,7 +18,7 @@ from __future__ import annotations
 
 from dataclasses import dataclass
 
-from freeroute.geometry import IntBox, Simplex, overlaps_2d, segment_octagon
+from freeroute.geometry import IntBox, IntPoint, Simplex, overlaps_2d, segment_octagon, segment_slab
 
 __all__ = ["TreeShape", "ShapeSearchTree"]
 
@@ -63,7 +63,9 @@ class TreeShape:
         segment swept by ``half_width + clearance`` (exact integer superset)."""
         if self.seg is None:
             return self.tile.offset(clearance)
-        a, b, half_width = self.seg
+        a, b, half_width = self.seg[-3:]
+        if self.seg[0] == "slab":  # a slanted pin exit, at any angle
+            return segment_slab(a, b, half_width + clearance)
         return segment_octagon(a, b, half_width + clearance)
 
 
@@ -151,6 +153,25 @@ class ShapeSearchTree:
                 return True
         return False
 
+    def segment_conflict(
+        self, a: IntPoint, b: IntPoint, half_width: int, net_no: int, layer: int,
+        clearance: int, kind: str = "wire",
+    ) -> bool:
+        """:meth:`clearance_conflict` for a slanted segment, checked on its
+        exact swept copper instead of its bounding box (which would reach the
+        neighbouring pads of a pin leaving along its turned pad's axis)."""
+        copper = segment_slab(a, b, half_width)
+        grown = segment_slab(a, b, half_width + clearance)
+        for shape in self.overlapping(grown.bounding_box()):
+            if shape.net_no == net_no or not shape.on_layer(layer):
+                continue
+            if shape.blocks != "all" and shape.blocks != kind + "s":
+                continue
+            other = shape.exact if shape.exact is not None else shape.tile
+            if overlaps_2d(copper if not shape.clearance else grown, other):
+                return True
+        return False
+
     def rule_area_overlap(self, box: IntBox, layer: int, kind: str = "wire") -> bool:
         """True if ``box`` overlaps a rule area on ``layer`` that stops ``kind``."""
         for shape in self.overlapping(box):
@@ -188,6 +209,8 @@ class ShapeSearchTree:
         overlap). Static pad-vs-pad spacing in the source design is not counted.
         """
         for shape in self.all_shapes():
+            if not shape.routed:
+                continue  # a pair with routed copper is checked from that side
             expanded = shape.tile.offset(clearance)
             grown = None  # exact clearance region, built lazily only for diagonals
             for other in self.overlapping(expanded):

src/freeroute/cli.py

@@ -30,8 +30,11 @@ from freeroute.ses import write_ses
 #: which optional flags each engine actually implements. Anything not listed for
 #: an engine is rejected by :func:`_validate` rather than quietly ignored.
 ENGINE_OPTIONS: dict[str, frozenset[str]] = {
-    "grid": frozenset({"rip_up", "max_passes", "seed", "orders", "promote", "access", "rollback"}),
-    "exact": frozenset({"shove", "diagonal", "rip_up", "max_passes", "seed", "orders", "promote", "access", "rollback"}),
+    "grid": frozenset({"rip_up", "max_passes", "seed", "orders", "promote", "access", "negotiate", "rollback", "tree"}),
+    "exact": frozenset({
+        "shove", "diagonal", "rip_up", "max_passes", "seed", "orders", "promote", "access",
+        "negotiate", "rollback", "tree", "window",
+    }),
     "room": frozenset({"shove", "pack"}),
 }
 
@@ -46,7 +49,10 @@ _FLAG_NAMES = {
     "orders": "--orders",
     "promote": "--promote-failures",
     "access": "--access-cost",
+    "negotiate": "--negotiate",
     "rollback": "--no-rollback",
+    "tree": "--no-tree",
+    "window": "--window-reroute",
 }
 
 
@@ -167,6 +173,14 @@ def build_parser() -> argparse.ArgumentParser:
         help="grid and exact engines: extra cost for a route to pass where it would close "
         "another pin's way out while that pin still has connections to route (default 0: off)",
     )
+    parser.add_argument(
+        "--negotiate",
+        type=int,
+        metavar="N",
+        help="grid and exact engines: before routing, N rounds of negotiation on the empty "
+        "board, where routes may share space at a price that rises where they compete; "
+        "the contested cells then cost extra in the real routing (default 0: off)",
+    )
     parser.add_argument(
         "--no-rollback",
         dest="rollback",
@@ -175,6 +189,53 @@ def build_parser() -> argparse.ArgumentParser:
         "connections a rip-up displaces are rerouted at once and the rip-up is undone "
         "if fewer connections end up routed",
     )
+    parser.add_argument(
+        "--no-tree",
+        dest="tree_nets",
+        action="store_false",
+        help="grid and exact engines: join a multi-pin net's pins as a chain in pin "
+        "order, each connection ending on one chosen pin, as before. By default they are "
+        "paired by a minimum spanning tree and a connection may end on copper its net "
+        "has already routed",
+    )
+    parser.add_argument(
+        "--window-reroute",
+        type=int,
+        metavar="N",
+        help="exact engine: after routing, N rounds of window re-routes: around each "
+        "connection still unrouted, the nets routed wholly inside a window are ripped and "
+        "the window routed again on a finer grid, kept only if fewer connections are left "
+        "unrouted; each round doubles the window's margin (default 0: off)",
+    )
+    parser.add_argument(
+        "--window-resolution",
+        type=int,
+        default=4,
+        metavar="K",
+        help="the window re-route's grid resolution (default 4)",
+    )
+    parser.add_argument(
+        "--window-budget",
+        type=float,
+        default=0.25,
+        metavar="F",
+        help="the window re-route stops starting windows once it has spent this share "
+        "of the routing's own time (default 0.25)",
+    )
+    parser.add_argument(
+        "--window-cap",
+        type=int,
+        default=40,
+        metavar="W",
+        help="at most this many windows per round, smallest first (default 40)",
+    )
+    parser.add_argument(
+        "--window-margin",
+        type=float,
+        default=1.5,
+        metavar="MM",
+        help="the first round's window margin around the stuck connection's pins (default 1.5)",
+    )
     parser.add_argument(
         "--hole-to-hole",
         type=float,
@@ -212,7 +273,10 @@ def main(argv: list[str] | None = None) -> int:
             ("orders", args.orders is not None),
             ("promote", args.promote_failures is not None),
             ("access", args.access_cost is not None),
+            ("negotiate", args.negotiate is not None),
             ("rollback", not args.rollback),
+            ("tree", not args.tree_nets),
+            ("window", args.window_reroute is not None),
         )
         if asked
     ]
@@ -247,8 +311,15 @@ def main(argv: list[str] | None = None) -> int:
             "resolution": 2 if args.grid_resolution is None else args.grid_resolution,
             "heuristic_weight": args.heuristic_weight,
             "access_cost": args.access_cost or 0.0,
+            "negotiate": args.negotiate or 0,
             "hole_to_hole_mm": args.hole_to_hole,
             "rollback": args.rollback,
+            "tree_nets": args.tree_nets,
+            "window_reroute": args.window_reroute or 0,
+            "window_resolution": args.window_resolution,
+            "window_margin_mm": args.window_margin,
+            "window_budget": args.window_budget,
+            "window_cap": args.window_cap,
         }
     elif args.engine == "grid":
         options = {
@@ -258,8 +329,10 @@ def main(argv: list[str] | None = None) -> int:
             "edge_clearance_mm": args.edge_clearance,
             "resolution": 1 if args.grid_resolution is None else args.grid_resolution,
             "access_cost": args.access_cost or 0.0,
+            "negotiate": args.negotiate or 0,
             "hole_to_hole_mm": args.hole_to_hole,
             "rollback": args.rollback,
+            "tree_nets": args.tree_nets,
         }
     if args.engine == "room":
         result = build_rooms_routing_result(

src/freeroute/geometry/__init__.py

@@ -21,7 +21,7 @@ from .direction import Direction, IntDirection
 from .float_point import FloatPoint
 from .limits import CRIT_DOUBLE, CRIT_INT
 from .line import Line
-from .octagon import ceil_sqrt2, overlaps_2d, segment_octagon
+from .octagon import ceil_sqrt2, overlaps_2d, segment_octagon, segment_slab
 from .point import IntPoint, Point, RationalPoint, point, rational_point
 from .polygon import Polygon
 from .polygon_shape import PolygonShape
@@ -59,5 +59,6 @@ __all__ = [
     "shove_segment",
     "ceil_sqrt2",
     "segment_octagon",
+    "segment_slab",
     "overlaps_2d",
 ]

src/freeroute/geometry/octagon.py

@@ -29,7 +29,7 @@ from .line import Line
 from .point import IntPoint
 from .simplex import Simplex
 
-__all__ = ["ceil_sqrt2", "segment_octagon", "overlaps_2d"]
+__all__ = ["ceil_sqrt2", "segment_octagon", "segment_slab", "overlaps_2d"]
 
 
 def ceil_sqrt2(radius: int) -> int:
@@ -82,6 +82,46 @@ def segment_octagon(a: IntPoint, b: IntPoint, radius: int) -> Simplex:
     return Simplex.get_instance(lines)
 
 
+def segment_slab(a: IntPoint, b: IntPoint, radius: int) -> Simplex:
+    """Convex cover of segment ``a``-``b`` swept by ``radius``, at any angle.
+
+    The rectangle along the segment, ``radius`` either side, with flush ends
+    like :func:`polyline.segment_box`: the ends of a trace leg sit on a pad or
+    on the square corner tile of the next leg, which cover them. Corners are
+    rounded away from the middle and the radius gets one unit more, so the
+    side bounds never under-report, and it stays tight for a slanted segment
+    off the 45-degree lines (a pin leaving along its pad's axis on a part
+    turned 30 degrees).
+    """
+    dx, dy = b.x - a.x, b.y - a.y
+    length = math.hypot(dx, dy)
+    r = max(radius, 0) + 1
+    if length == 0:
+        return Simplex.from_corners([
+            IntPoint(a.x - r, a.y - r), IntPoint(a.x + r, a.y - r),
+            IntPoint(a.x + r, a.y + r), IntPoint(a.x - r, a.y + r),
+        ])
+    ux, uy = dx / length, dy / length
+    nx, ny = -uy, ux
+    mx, my = (a.x + b.x) / 2, (a.y + b.y) / 2
+
+    def out(x: float, y: float) -> IntPoint:
+        return IntPoint(math.ceil(x) if x >= mx else math.floor(x),
+                        math.ceil(y) if y >= my else math.floor(y))
+
+    corners = [
+        out(a.x + nx * r, a.y + ny * r),
+        out(b.x + nx * r, b.y + ny * r),
+        out(b.x - nx * r, b.y - ny * r),
+        out(a.x - nx * r, a.y - ny * r),
+    ]
+    for winding in (corners, corners[::-1]):
+        slab = Simplex.from_corners(winding)
+        if not slab.is_empty():
+            return slab
+    return Simplex(())
+
+
 def overlaps_2d(shape_a, shape_b) -> bool:
     """True if the two convex tiles share 2-D area (a real clearance overlap).
 

src/freeroute/route/exact_router.py

@@ -38,8 +38,10 @@ from freeroute.geometry import (
     IntPoint,
     Polyline,
     PolylineShape,
+    Simplex,
     segment_box,
     segment_octagon,
+    segment_slab,
     shove_segment,
 )
 from freeroute.geometry.polyline import corner_box
@@ -98,10 +100,14 @@ def route_board_exact(
     seed: int | None = None,
     route_first: frozenset | None = None,
     access_cost: float = 0.0,
+    negotiate: int = 0,
     rollback: bool = True,
+    tree_nets: bool = True,
     net_widths: dict[int, int] | None = None,
     via_drill: int | None = None,
     hole_to_hole: int = 0,
+    only_nets: frozenset | None = None,
+    bounds: IntBox | None = None,
 ) -> ExactRouteResult:
     """Route ``board`` orthogonally and verify the result with exact geometry.
 
@@ -133,10 +139,14 @@ def route_board_exact(
         seed=seed,
         route_first=route_first,
         access_cost=access_cost,
+        negotiate=negotiate,
         rollback=rollback,
+        tree_nets=tree_nets,
         net_widths=net_widths,
         via_drill=via_drill,
         hole_to_hole=hole_to_hole,
+        only_nets=only_nets,
+        bounds=bounds,
     )
     edge = 0 if edge_clearance is None else edge_clearance
     outline = board.outline
@@ -154,7 +164,9 @@ def route_board_exact(
         net = pin.net_nos[0] if pin.net_nos else -1
         pin_layers = frozenset(layer for layer in pin.layers if layer in signal_layers)
         if pin_layers:
-            tree.insert(TreeShape(next(owner), net, pin_layers, box))
+            # a rotated pad is checked against its outline, not its box
+            exact = pin.shape if _is_rotated(pin.shape) else None
+            tree.insert(TreeShape(next(owner), net, pin_layers, box, exact=exact))
     for net, copper_layers, box in board.get_fixed_copper():
         on = frozenset(layer for layer in copper_layers if layer in signal_layers)
         if on and not box.is_empty():
@@ -188,25 +200,43 @@ def route_board_exact(
     # 25-pin supply net costs that one connection, not the whole net.
     rejected: list[tuple[int, str, str]] = []
     ends_list = result.connection_ends or [("?", "?", "")] * len(result.connections)
+    anchors_list = getattr(result, "connection_anchors", None) or [()] * len(result.connections)
     # each net is checked at the width it will be written at: its class's
     # when all of its connections went in at that, else the default
     net_half = dict(result.net_half)
-    for (net_no, wires, vias), ends in sorted(
-        zip(result.connections, ends_list, strict=False), key=lambda c: c[0][0]
+    # a connection that ended on another's copper (a T into its net's tree)
+    # dangles if that one is dropped, so it is dropped too; connections come
+    # in commit order, anchors first
+    dropped_at: set[int] = set()
+    for pos, ((net_no, wires, vias), ends, anchors) in sorted(
+        enumerate(zip(result.connections, ends_list, anchors_list, strict=False)),
+        key=lambda c: c[1][0][0],
     ):
+        if any(a in dropped_at for a in anchors):
+            dropped_at.add(pos)
+            rejected.append((net_no, *ends))
+            continue
         wire_half = net_half.get(net_no, half_width)
-        boxes = _copper_boxes(wires, vias, wire_half, via_layers, via_half)
-        wire_count = len(_copper_boxes(wires, [], wire_half, via_layers, via_half))
+        pieces = _copper_pieces(wires, vias, wire_half, via_layers, via_half)
+        boxes = [(box, box_layers) for box, box_layers, _ in pieces]
+        wire_count = len(_copper_pieces(wires, [], wire_half, via_layers, via_half))
         if any(
-            tree.clearance_conflict(
-                box, net_no, layer, clearance, "wire" if i < wire_count else "via"
+            (
+                tree.segment_conflict(*seg, wire_half, net_no, layer, clearance)
+                if seg is not None
+                else tree.clearance_conflict(
+                    box, net_no, layer, clearance, "wire" if i < wire_count else "via"
+                )
             )
-            for i, (box, box_layers) in enumerate(boxes)
+            for i, (box, box_layers, seg) in enumerate(pieces)
             for layer in box_layers
         ) or _end_in_rule_area(tree, wires, wire_half) or (
-            outline is not None and not all(outline.box_clear(b, edge) for b, _ in boxes)
+            outline is not None and not _inside_outline(
+                outline, boxes[:wire_count], vias, (via_half or wire_half) + edge, edge
+            )
         ):
             rejected.append((net_no, *ends))
+            dropped_at.add(pos)
             continue  # exact-clearance conflict -> drop (may be recovered by shove)
         acc = accepted.get(net_no)
         if acc is None:
@@ -218,16 +248,25 @@ def route_board_exact(
             v for v in dict.fromkeys(vias)
             if v not in acc.vias and not _on_fixed_via(net_no, v, fixed_vias, via_half)
         )
-        for box, box_layers in boxes:
+        for box, box_layers, seg in pieces:
             oid = next(owner)
-            tree.insert(TreeShape(oid, net_no, box_layers, box, routed=True))
+            if seg is None:
+                tree.insert(TreeShape(oid, net_no, box_layers, box, routed=True))
+            else:  # a slanted pin exit: its exact copper, rebuilt for the DRC check
+                tree.insert(TreeShape(
+                    oid, net_no, box_layers, box, routed=True,
+                    exact=segment_slab(*seg, wire_half), seg=("slab", *seg, wire_half),
+                ))
             acc.owners.append(oid)
 
     accepted_before_recovery = set(accepted)
     # a net is dropped if it has a real ratsnest (>= 2 pins on a signal layer)
     # but was not accepted — whether the grid failed to route it or its exact
     # copper conflicted.
-    dropped = sorted(_routable_nets(board, signal_layers) - set(accepted))
+    routable = _routable_nets(board, signal_layers)
+    if only_nets is not None:  # a window re-route: the other nets are not ours to route
+        routable &= set(only_nets)
+    dropped = sorted(routable - set(accepted))
 
     shoves = 0
     if shove and dropped:
@@ -252,7 +291,7 @@ def route_board_exact(
 
     if diagonal:
         outline = board.bounding_box
-        for net_no in sorted(_routable_nets(board, signal_layers)):
+        for net_no in sorted(routable):
             _diagonalize(
                 net_no, board, tree, accepted, owner, signal_layers, half_width, clearance, outline
             )
@@ -655,6 +694,27 @@ def _on_fixed_via(net_no, point, fixed_vias, via_half) -> bool:
     )
 
 
+def _copper_pieces(wires, vias, half_width, via_layers, via_half=None):
+    """Like :func:`_copper_boxes`, but a slanted wire segment (a pin leaving
+    along a turned pad's axis) comes with its end points, so it can be checked
+    on its exact copper: ``(box, layers, (a, b) or None)``."""
+    via_half = via_half or half_width
+    pieces: list[tuple[IntBox, frozenset[int], tuple | None]] = []
+    for layer, points in wires:
+        on = frozenset({layer})
+        for a, b in zip(points, points[1:], strict=False):
+            if a.x == b.x or a.y == b.y:
+                pieces.append((segment_box(a, b, half_width), on, None))
+            else:
+                pieces.append((segment_slab(a, b, half_width).bounding_box(), on, (a, b)))
+        for c in points[1:-1]:
+            pieces.append((corner_box(c, half_width), on, None))
+    for loc in vias:
+        vbox = IntBox(loc.x - via_half, loc.y - via_half, loc.x + via_half, loc.y + via_half)
+        pieces.append((vbox, via_layers, None))
+    return pieces
+
+
 def _copper_boxes(wires, vias, half_width, via_layers, via_half=None):
     via_half = via_half or half_width
     boxes: list[tuple[IntBox, frozenset[int]]] = []
@@ -667,6 +727,19 @@ def _copper_boxes(wires, vias, half_width, via_layers, via_half=None):
     return boxes
 
 
+def _inside_outline(outline, wire_boxes, vias, via_reach, edge) -> bool:
+    """Copper inside the board, ``edge`` from its outline. A via is round, as
+    the grid and KiCad take it: its square box would reach past a chamfered
+    corner where the via itself does not."""
+    return all(outline.box_clear(b, edge) for b, _ in wire_boxes) and all(
+        outline.point_clear(v, via_reach) for v in vias
+    )
+
+
+def _is_rotated(shape) -> bool:
+    return isinstance(shape, Simplex) and not shape.is_int_box()
+
+
 def _net_pins(board: BasicBoard, net_no: int, signal_layers) -> list[Pin]:
     return [
         pin

src/freeroute/route/pipeline.py

@@ -13,6 +13,7 @@ to DSN units (dividing by the resolution) for the SES ``(wire (path ...))`` and
 from __future__ import annotations
 
 import re
+import time
 
 from freeroute.board import build_board
 from freeroute.dsn import DsnBoard, parse_dsn
@@ -21,6 +22,7 @@ from freeroute.ses import RoutedVia, RoutedWire, RoutingResult, write_ses
 from .exact_router import ExactRouteResult, route_board_exact
 from .grid_router import RouteResult, route_board
 from .room_router import route_board_rooms
+from .window import window_reroute as window_reroute_stage
 
 __all__ = ["route", "route_dsn_board", "build_routing_result"]
 
@@ -118,8 +120,10 @@ def route_dsn_board(
     seed: int | None = None,
     route_first: frozenset | None = None,
     access_cost: float = 0.0,
+    negotiate: int = 0,
     hole_to_hole_mm: float = 0.25,
     rollback: bool = True,
+    tree_nets: bool = True,
 ) -> tuple[RouteResult, int, list[str]]:
     """Route a parsed :class:`DsnBoard`; return the board-unit result, the scale,
     and the layer names. ``layers`` restricts routing to those signal-layer
@@ -143,7 +147,9 @@ def route_dsn_board(
         seed=seed,
         route_first=route_first,
         access_cost=access_cost,
+        negotiate=negotiate,
         rollback=rollback,
+        tree_nets=tree_nets,
         net_widths=_net_widths_board(dsn, scale),
         via_drill=_via_drill_board(dsn, scale),
         hole_to_hole=_mm_to_board(dsn, scale, hole_to_hole_mm) or 0,
@@ -196,8 +202,10 @@ def build_routing_result(
     seed: int | None = None,
     route_first: frozenset | None = None,
     access_cost: float = 0.0,
+    negotiate: int = 0,
     hole_to_hole_mm: float = 0.25,
     rollback: bool = True,
+    tree_nets: bool = True,
 ) -> RoutingResult:
     """Route ``dsn`` (grid track) and convert to a DSN-unit RoutingResult."""
     route, scale, layer_names = route_dsn_board(
@@ -205,8 +213,10 @@ def build_routing_result(
         edge_clearance_mm=edge_clearance_mm, resolution=resolution, seed=seed,
         route_first=route_first,
         access_cost=access_cost,
+        negotiate=negotiate,
         hole_to_hole_mm=hole_to_hole_mm,
         rollback=rollback,
+        tree_nets=tree_nets,
     )
     return _to_routing_result(route, dsn, scale, layer_names)
 
@@ -225,8 +235,15 @@ def route_dsn_board_exact(
     seed: int | None = None,
     route_first: frozenset | None = None,
     access_cost: float = 0.0,
+    negotiate: int = 0,
     hole_to_hole_mm: float = 0.25,
     rollback: bool = True,
+    tree_nets: bool = True,
+    window_reroute: int = 0,
+    window_resolution: int = 4,
+    window_margin_mm: float = 1.5,
+    window_budget: float = 0.25,
+    window_cap: int = 40,
 ) -> tuple[ExactRouteResult, int, list[str]]:
     """Route a parsed :class:`DsnBoard` with the exact-geometry (orthogonal,
     DRC-verified) track; return the exact result, the scale, and layer names.
@@ -238,27 +255,48 @@ def route_dsn_board_exact(
     edge_clearance_board = _mm_to_board(dsn, scale, edge_clearance_mm)
     width_board = round(_rule_width_dsn(dsn) * scale)
     clearance_board = round(_rule_clearance_dsn(dsn) * scale)
+    # the settings a window re-route repeats, at its own resolution
+    common = {
+        "heuristic_weight": heuristic_weight,
+        "via_half": _via_half_board(dsn, scale),
+        "edge_clearance": edge_clearance_board,
+        "trace_width": width_board,
+        "clearance": clearance_board,
+        "layers": layers,
+        "max_passes": max_passes,
+        "rip_up": rip_up,
+        "shove": shove,
+        "diagonal": diagonal,
+        "rollback": rollback,
+        "tree_nets": tree_nets,
+        "net_widths": _net_widths_board(dsn, scale),
+        "via_drill": _via_drill_board(dsn, scale),
+        "hole_to_hole": _mm_to_board(dsn, scale, hole_to_hole_mm) or 0,
+    }
+    started = time.monotonic()
     exact = route_board_exact(
         board,
         resolution=resolution,
-        heuristic_weight=heuristic_weight,
-        via_half=_via_half_board(dsn, scale),
-        edge_clearance=edge_clearance_board,
-        trace_width=width_board,
-        clearance=clearance_board,
-        layers=layers,
-        max_passes=max_passes,
-        rip_up=rip_up,
-        shove=shove,
-        diagonal=diagonal,
         seed=seed,
         route_first=route_first,
         access_cost=access_cost,
-        rollback=rollback,
-        net_widths=_net_widths_board(dsn, scale),
-        via_drill=_via_drill_board(dsn, scale),
-        hole_to_hole=_mm_to_board(dsn, scale, hole_to_hole_mm) or 0,
+        negotiate=negotiate,
+        **common,
     )
+    if window_reroute > 0:
+        via_half = common["via_half"] or max(width_board // 2, 1)
+        exact.result = window_reroute_stage(
+            dsn, exact.result, common,
+            rounds=window_reroute,
+            resolution=max(int(window_resolution), resolution),
+            margin=_mm_to_board(dsn, scale, window_margin_mm) or 0,
+            via_half=via_half,
+            via_drill=common["via_drill"] or 2 * via_half,
+            via_name=_via_padstack(dsn),
+            # a share of what the routing itself took
+            budget_s=max(float(window_budget), 0.0) * (time.monotonic() - started),
+            max_windows=window_cap,
+        )
     return exact, scale, [layer.name for layer in dsn.layers]
 
 
@@ -276,8 +314,15 @@ def build_exact_routing_result(
     seed: int | None = None,
     route_first: frozenset | None = None,
     access_cost: float = 0.0,
+    negotiate: int = 0,
     hole_to_hole_mm: float = 0.25,
     rollback: bool = True,
+    tree_nets: bool = True,
+    window_reroute: int = 0,
+    window_resolution: int = 4,
+    window_margin_mm: float = 1.5,
+    window_budget: float = 0.25,
+    window_cap: int = 40,
 ) -> RoutingResult:
     """Route ``dsn`` (exact track) and convert to a DSN-unit RoutingResult."""
     exact, scale, layer_names = route_dsn_board_exact(
@@ -293,8 +338,15 @@ def build_exact_routing_result(
         seed=seed,
         route_first=route_first,
         access_cost=access_cost,
+        negotiate=negotiate,
         hole_to_hole_mm=hole_to_hole_mm,
         rollback=rollback,
+        tree_nets=tree_nets,
+        window_reroute=window_reroute,
+        window_resolution=window_resolution,
+        window_margin_mm=window_margin_mm,
+        window_budget=window_budget,
+        window_cap=window_cap,
     )
     return _to_routing_result(exact.result, dsn, scale, layer_names)
 

src/freeroute/route/window.py

@@ -0,0 +1,248 @@
+"""Window re-route: a last stage for the connections still unrouted.
+
+Around each stuck connection a window is cut: the box of its two end pins
+plus a margin. Every net whose routed copper lies wholly inside it is
+ripped; everything else stays, as fixed copper. The window is then routed
+again on its own, on a finer grid than the whole board can afford, the
+stuck connection's net and the ripped nets only. The result is kept only
+if fewer connections are left unrouted than before; otherwise the board is
+as it was. Each round doubles the margin for the connections still stuck.
+
+It is a last stage, so it is kept cheap: a window's board holds only what
+the window needs (every pin and piece of copper of the nets it reroutes,
+so their connectivity is unchanged, and of the other items only those near
+the window), the smallest windows go first, at most ``max_windows`` run per
+round, and no new window starts once ``budget_s`` seconds are spent.
+
+What makes it differ from re-running the same search near the failure: the
+finer grid finds gaps the board's grid steps over, and the ripped nets go in
+again in a new order around the stuck one. A finer grid on the whole board
+costs routes elsewhere (its cells are slower and its order changes); inside
+a small window it only ever replaces what it can improve.
+"""
+
+from __future__ import annotations
+
+import time
+from typing import Any
+
+from freeroute.board import BasicBoard, build_board
+from freeroute.board.items import ObstacleArea, Pin, Trace, Via
+from freeroute.dsn import DsnBoard
+from freeroute.geometry import IntBox, IntPoint
+
+from .exact_router import route_board_exact
+from .grid_router import RouteResult
+
+Copper = tuple[list[tuple[int, list[IntPoint]]], list[IntPoint]]
+
+
+def _pin_labels(board) -> dict[tuple[int, str], IntPoint]:
+    """Each pin's location by (net, label), the label a failure names it by."""
+    found: dict[tuple[int, str], IntPoint] = {}
+    for pin in board.get_pins():
+        for net in pin.net_nos:
+            found.setdefault((net, f"{pin.component_ref}-{pin.name}"), pin.location)
+    return found
+
+
+def _end_point(labels, net: int, label: str) -> IntPoint | None:
+    """Where a failure's end is: the first pin its label names."""
+    return labels.get((net, label.split("/")[0]))
+
+
+def _inside(copper: Copper, window: IntBox) -> bool:
+    wires, vias = copper
+    points = [p for _layer, path in wires for p in path] + list(vias)
+    return bool(points) and all(
+        window.ll.x <= p.x <= window.ur.x and window.ll.y <= p.y <= window.ur.y for p in points
+    )
+
+
+def _item_box(item) -> IntBox | None:
+    if isinstance(item, (Pin, Via)):
+        return item.shape.bounding_box() if item.shape is not None else None
+    if isinstance(item, ObstacleArea):
+        return item.bounding_box()
+    if isinstance(item, Trace) and item.corners:
+        h = item.half_width
+        xs, ys = [p.x for p in item.corners], [p.y for p in item.corners]
+        return IntBox(min(xs) - h, min(ys) - h, max(xs) + h, max(ys) + h)
+    return None
+
+
+def _meets(box: IntBox | None, view: IntBox) -> bool:
+    return box is not None and box.ll.x <= view.ur.x and view.ll.x <= box.ur.x and (
+        box.ll.y <= view.ur.y and view.ll.y <= box.ur.y
+    )
+
+
+def _path_box(path: list[IntPoint], grow: int) -> IntBox:
+    xs, ys = [p.x for p in path], [p.y for p in path]
+    return IntBox(min(xs) - grow, min(ys) - grow, max(xs) + grow, max(ys) + grow)
+
+
+def _window_board(
+    base: BasicBoard, base_items: list, view: IntBox, affected: set[int],
+    copper: dict[int, Copper], keep: set[int], half: dict[int, int], default_half: int,
+    via_half: int, via_drill: int, layers: list[int], via_name: str,
+) -> BasicBoard:
+    """The board a window is routed on: the base board's items of the nets
+    being rerouted and those near ``view``, plus the routed copper being kept
+    (all of an affected net's, so its connectivity is the whole board's, and
+    of other nets only what is near ``view``), as fixed copper."""
+    board = BasicBoard(base.layer_structure, base.nets, base.clearance_matrix, base.bounding_box)
+    board.outline = base.outline
+    for item, box in base_items:
+        if (item.net_nos and item.net_nos[0] in affected) or _meets(box, view):
+            board.insert(item)
+    for net in keep:
+        wires, vias = copper.get(net, ([], []))
+        width = half.get(net, default_half)
+        mine = net in affected
+        for layer, path in wires:
+            if len(path) >= 2 and (mine or _meets(_path_box(path, width), view)):
+                board.insert(Trace(net_nos=[net], fixed=True, layer=layer, half_width=width, corners=list(path)))
+        for location in dict.fromkeys(vias):
+            shape = IntBox(location.x - via_half, location.y - via_half,
+                           location.x + via_half, location.y + via_half)
+            if mine or _meets(shape, view):
+                board.insert(Via(
+                    net_nos=[net], fixed=True, padstack_name=via_name, drill=via_drill,
+                    location=location, layers=list(layers), shape=shape,
+                ))
+    return board
+
+
+def _open(failed) -> list:
+    """Failures that are real opens, not connections left to a zone fill."""
+    return [f for f in failed if not (len(f) > 3 and f[3])]
+
+
+def window_reroute(
+    dsn: DsnBoard,
+    result: RouteResult,
+    route_args: dict[str, Any],
+    *,
+    rounds: int,
+    resolution: int,
+    margin: int,
+    via_half: int,
+    via_drill: int,
+    via_name: str,
+    budget_s: float | None = None,
+    max_windows: int = 40,
+) -> RouteResult:
+    """Re-route a window around each still-failing connection; keep only gains.
+
+    ``route_args`` are the exact engine's settings for the whole board (width,
+    clearance, layers, shove, ...); the window runs them at ``resolution``.
+    ``margin`` is the first round's window margin in board units. No new
+    window starts once ``budget_s`` seconds have gone by (None: no limit),
+    and at most ``max_windows`` run per round."""
+    started = time.monotonic()
+    if rounds < 1 or not _open(result.failed):
+        return result
+    default_half = result.half_width
+    copper: dict[int, Copper] = {
+        net: (list(result.wires.get(net, [])), list(result.vias.get(net, [])))
+        for net in set(result.wires) | set(result.vias)
+    }
+    half = dict(result.net_half)
+    failed = list(result.failed)
+    base = build_board(dsn)
+    base_items = [(item, _item_box(item)) for item in base.get_items()]
+    layers = route_args.get("layers") or [
+        i for i, layer in enumerate(base.layer_structure.arr) if layer.is_signal
+    ]
+    labels = _pin_labels(base)
+    # the copper a window's routing can feel from outside it
+    context = 2 * (route_args["trace_width"] + route_args["clearance"]) + 2 * via_half + (
+        route_args.get("edge_clearance") or 0
+    )
+
+    def window_of(entry, reach: int) -> IntBox | None:
+        ends = [_end_point(labels, entry[0], label) for label in entry[1:3]]
+        ends = [p for p in ends if p is not None]
+        if not ends:
+            return None
+        return IntBox(
+            min(p.x for p in ends) - reach, min(p.y for p in ends) - reach,
+            max(p.x for p in ends) + reach, max(p.y for p in ends) + reach,
+        )
+
+    def area(box: IntBox | None) -> float:
+        return float("inf") if box is None else (box.ur.x - box.ll.x) * (box.ur.y - box.ll.y)
+
+    changed = out_of_time = False
+    for rnd in range(rounds):
+        reach = margin * (2 ** rnd)
+
+        # the cheap wins first: the smallest windows
+        todo = sorted(_open(list(failed)), key=lambda f: area(window_of(f, reach)))
+        for entry in todo[:max(int(max_windows), 1)]:
+            if budget_s is not None and time.monotonic() - started >= budget_s:
+                out_of_time = True
+                break
+            if entry not in failed:
+                continue  # an earlier window routed it
+            net = entry[0]
+            window = window_of(entry, reach)
+            if window is None:
+                continue
+            victims = {n for n, c in copper.items() if _inside(c, window)}
+            affected = victims | {net}
+            before = _open(f for f in failed if f[0] in affected)
+            keep = set(copper) - victims
+            view = IntBox(window.ll.x - context, window.ll.y - context,
+                          window.ur.x + context, window.ur.y + context)
+            board = _window_board(base, base_items, view, affected, copper, keep, half,
+                                  default_half, via_half, via_drill, layers, via_name)
+            sub = route_board_exact(
+                board, **route_args, resolution=resolution,
+                only_nets=frozenset(affected), bounds=window,
+                route_first=frozenset((f[0], f[1], f[2]) for f in before),
+            ).result
+            after = _open(f for f in sub.failed if f[0] in affected)
+            if len(after) >= len(before):
+                continue
+            # the window board left out what lies away from it, so copper
+            # reaching out of the window was never checked against it
+            if any(not _inside((sub.wires.get(n, []), sub.vias.get(n, [])), window)
+                   for n in affected if sub.wires.get(n) or sub.vias.get(n)):
+                continue
+            # a net keeping some of its copper is written at one width: the
+            # window's new copper has to have gone in at that width too
+            if any(
+                n not in victims and copper.get(n) and (sub.wires.get(n) or sub.vias.get(n))
+                and sub.net_half.get(n, default_half) != half.get(n, default_half)
+                for n in affected
+            ):
+                continue
+            for n in affected:
+                kept_wires, kept_vias = copper.get(n, ([], [])) if n not in victims else ([], [])
+                copper[n] = (kept_wires + sub.wires.get(n, []), kept_vias + sub.vias.get(n, []))
+                if n in victims:
+                    half.pop(n, None)
+                    if n in sub.net_half:
+                        half[n] = sub.net_half[n]
+            failed = [f for f in failed if f[0] not in affected] + [
+                f for f in sub.failed if f[0] in affected
+            ]
+            changed = True
+        if out_of_time or not _open(failed):
+            break
+
+    if not changed:
+        return result
+    out = RouteResult(default_half)
+    for net, (wires, vias) in copper.items():
+        for layer, path in wires:
+            out.add_wire(net, layer, path)
+        for location in dict.fromkeys(vias):
+            out.add_via(net, location)
+    out.failed = failed
+    out.unrouted = len(_open(failed))
+    out.net_half = half
+    out.narrowed = list(result.narrowed)
+    return out

tests/route/test_axis_escapes.py

@@ -0,0 +1,113 @@
+"""Pins of a fine-pitch part turned off the grid axes leave along their pads.
+
+A QFN at 45 degrees has no straight exit: every horizontal or vertical step
+from a pin passes its neighbours closer than the clearance (0.35 mm away on
+each axis at 0.5 mm pitch). The grid leaves along the pad's own axis first,
+past the pin row, and the exact engine checks that slanted leg on its exact
+copper. Found on th-eda's lift ESC, where a QFN-24 at 45 degrees left 15
+connections unroutable on an empty board.
+"""
+
+from __future__ import annotations
+
+import math
+
+import pytest
+
+from freeroute.board import build_board
+from freeroute.dsn import parse_dsn
+from freeroute.geometry import IntPoint, overlaps_2d, segment_slab
+from freeroute.route.grid_router import GridRouter
+from freeroute.route.pipeline import (
+    _rule_clearance_dsn,
+    _rule_width_dsn,
+    _via_half_board,
+    build_exact_routing_result,
+)
+
+
+def _qfn_side_dsn(rotation: float) -> str:
+    """Two rows of five 0.25 x 0.8 mm pads at 0.5 mm pitch (one side of a
+    QFN and its opposite side), turned by ``rotation``; each pin of the top
+    row is its own net, routed to a pad 4.5 mm out, the pads fanned 1.5 mm
+    apart."""
+    cx, cy = 100000, -100000
+    t = math.radians(rotation)
+    out = (-math.sin(t), math.cos(t))  # the pads' outward axis after turning
+    along = (math.cos(t), math.sin(t))  # the pin row
+    pins, targets, nets = [], [], []
+    for i in range(5):
+        x = -1000 + 500 * i
+        pins += [f"(pin P {i + 1} {x} 1000)", f"(pin P {i + 6} {x} -1000)"]
+        px = cx + x * math.cos(t) - 1000 * math.sin(t)
+        py = cy + x * math.sin(t) + 1000 * math.cos(t)
+        spread = 1500 * (i - 2) - x  # fan the far pads out to 1.5 mm apart
+        tx = px + 4500 * out[0] + spread * along[0]
+        ty = py + 4500 * out[1] + spread * along[1]
+        targets.append(f"(place T{i + 1} {round(tx)} {round(ty)} front 0)")
+        nets.append(f"(net N{i} (pins U1-{i + 1} T{i + 1}-1))")
+    return f"""(pcb qfn (parser) (resolution um 10) (unit um)
+  (structure
+    (layer F.Cu (type signal)) (layer B.Cu (type signal))
+    (boundary (path pcb 0  115000 -115000  85000 -115000  85000 -85000  115000 -85000
+      115000 -115000))
+    (via "Via[0-1]_450:200_um")
+    (rule (width 150) (clearance 150)))
+  (placement
+    (component Q (place U1 {cx} {cy} front {rotation}))
+    (component T {" ".join(targets)}))
+  (library
+    (image Q {" ".join(pins)})
+    (image T (pin t 1 0 0))
+    (padstack P (shape (rect F.Cu -125 -400 125 400)) (attach off))
+    (padstack t (shape (rect F.Cu -300 -300 300 300)) (attach off))
+    (padstack "Via[0-1]_450:200_um" (shape (circle F.Cu 450)) (shape (circle B.Cu 450))
+      (attach off)))
+  (network {" ".join(nets)}))"""
+
+
+@pytest.mark.parametrize("rotation", [45, 30, -45])
+def test_a_turned_fine_pitch_part_gets_its_pins_out(rotation):
+    result = build_exact_routing_result(parse_dsn(_qfn_side_dsn(rotation)), resolution=2, shove=True)
+    assert result.unrouted == []
+
+
+def test_the_exit_runs_along_the_pad_axis_and_clears_the_neighbours():
+    dsn = parse_dsn(_qfn_side_dsn(45))
+    s = dsn.resolution.value
+    board = build_board(dsn)
+    router = GridRouter(
+        board,
+        trace_width=round(_rule_width_dsn(dsn) * s),
+        clearance=round(_rule_clearance_dsn(dsn) * s),
+        via_half=_via_half_board(dsn, s),
+        orthogonal=True,
+    )
+    pins = {p.name: p for p in board.get_pins() if p.component_ref == "U1"}
+    pin = pins["3"]
+    exit_point = router._axis_exit(pin)
+    assert exit_point is not None
+    dx, dy = exit_point.x - pin.location.x, exit_point.y - pin.location.y
+    assert abs(abs(dx) - abs(dy)) <= 2  # along the 45-degree axis
+    leg = segment_slab(pin.location, exit_point, router.half_width + router.clearance)
+    for name in ("2", "4"):
+        assert not overlaps_2d(leg, pins[name].shape)
+
+
+def test_a_pad_on_the_grid_axes_keeps_the_usual_exits():
+    dsn = parse_dsn(_qfn_side_dsn(0))
+    s = dsn.resolution.value
+    board = build_board(dsn)
+    router = GridRouter(board, trace_width=round(_rule_width_dsn(dsn) * s),
+                        clearance=round(_rule_clearance_dsn(dsn) * s), via_half=_via_half_board(dsn, s))
+    pin = next(p for p in board.get_pins() if p.component_ref == "U1" and p.name == "3")
+    assert router._axis_exit(pin) is None
+
+
+def test_a_slanted_slab_is_tight_where_a_bounding_box_is_not():
+    slab = segment_slab(IntPoint(0, 0), IntPoint(10000, 10000), 750)
+    # a point beside the diagonal but inside its bounding box
+    from freeroute.geometry import IntBox
+
+    assert not overlaps_2d(slab, IntBox(8000, 0, 8100, 100))
+    assert overlaps_2d(slab, IntBox(4900, 4900, 5100, 5100))

tests/route/test_grid_exact_agreement.py

@@ -0,0 +1,284 @@
+"""The grid must not believe copper legal that the exact check then refuses.
+
+Each case is one way the two used to disagree on roomba-ESP12E: a rotated oval
+pad modelled as an inflated box (and opened to its own net), a via shared by
+two connections of a net losing its footprint when one of them is ripped, and
+a wider net class searched as if it were the default width.
+"""
+
+from __future__ import annotations
+
+import math
+
+import pytest
+
+from freeroute.board import build_board
+from freeroute.dsn import parse_dsn
+from freeroute.geometry import IntBox, Simplex
+from freeroute.route.grid_router import GridRouter
+from freeroute.route.pipeline import (
+    _rule_clearance_dsn,
+    _rule_width_dsn,
+    _via_half_board,
+    build_exact_routing_result,
+)
+
+# --- rotated oval pads -------------------------------------------------------
+
+
+def _socket_dsn(rotation: float, layout: str) -> str:
+    """A 1x4 2.54 mm socket strip (rect pin 1, oval pins 2-4) at ``rotation``,
+    each pin its own net, routed to a small SMD pad 0.9 mm away."""
+    cx, cy = 100000, -100000
+    t = math.radians(rotation)
+    ax = (math.cos(t), math.sin(t))
+    perp = (-math.sin(t), math.cos(t))
+    places = []
+    for i in range(4):
+        px, py = cx + 2540 * i * ax[0], cy + 2540 * i * ax[1]
+        side = 1 if i % 2 == 0 else -1
+        if layout == "y":
+            tx, ty = px, py + side * 9000
+        else:
+            tx, ty = px + side * 8000 * perp[0], py + side * 8000 * perp[1]
+        places.append(f"(place T{i + 1} {round(tx)} {round(ty)} front 0)")
+    nets = " ".join(f"(net N{i} (pins P3-{i + 1} T{i + 1}-1))" for i in range(4))
+    return f"""(pcb socket (parser) (resolution um 10) (unit um)
+  (structure
+    (layer F.Cu (type signal)) (layer B.Cu (type signal))
+    (boundary (path pcb 0  125000 -115000  85000 -115000  85000 -75000  125000 -75000
+      125000 -115000))
+    (via "Via[0-1]_800:400_um")
+    (rule (width 300) (clearance 250)))
+  (placement
+    (component S (place P3 {cx} {cy} front {rotation}))
+    (component T {" ".join(places)}))
+  (library
+    (image S (pin R 1 0 0) (pin O 2 2540 0) (pin O 3 5080 0) (pin O 4 7620 0))
+    (image T (pin t 1 0 0))
+    (padstack O (shape (path F.Cu 1727.2 0 -152.4 0 152.4))
+      (shape (path B.Cu 1727.2 0 -152.4 0 152.4)) (attach off))
+    (padstack R (shape (rect F.Cu -863.6 -1016 863.6 1016))
+      (shape (rect B.Cu -863.6 -1016 863.6 1016)) (attach off))
+    (padstack t (shape (rect F.Cu -500 -500 500 500)) (attach off))
+    (padstack "Via[0-1]_800:400_um" (shape (circle F.Cu 800)) (shape (circle B.Cu 800))
+      (attach off)))
+  (network {nets}
+    (class c N0 N1 N2 N3 (circuit (use_via "Via[0-1]_800:400_um"))
+      (rule (width 300) (clearance 250)))))"""
+
+
+def test_a_rotated_oval_pad_is_its_outline_not_its_bounding_box():
+    board = build_board(parse_dsn(_socket_dsn(60, "y")))
+    oval = next(p for p in board.get_pins() if p.component_ref == "P3" and p.name == "2")
+    assert isinstance(oval.shape, Simplex) and not oval.shape.is_int_box()
+    box = oval.shape.bounding_box()
+    assert oval.shape.contains(oval.location)
+    assert not oval.shape.contains(box.ll) and not oval.shape.contains(box.ur)
+
+
+@pytest.mark.parametrize("layout", ["y", "perp"])
+def test_routes_leaving_a_rotated_socket_pass_the_exact_check(layout):
+    result = build_exact_routing_result(
+        parse_dsn(_socket_dsn(60, layout)), resolution=2, shove=True
+    )
+    assert result.unrouted == []
+
+
+# --- a via two connections share --------------------------------------------
+
+_SHARED_VIA = """(pcb shared (parser) (resolution um 10) (unit um)
+  (structure
+    (layer Top (type signal)) (layer Bottom (type signal))
+    (boundary (path pcb 0  0 0  20000 0  20000 -20000  0 -20000  0 0))
+    (via "Via[0-1]_800:400_um")
+    (rule (width 300) (clearance 250)))
+  (library
+    (padstack p (shape (rect Top -400 -400 400 400)) (attach off))
+    (padstack "Via[0-1]_800:400_um" (shape (circle Top 800)) (shape (circle Bottom 800))
+      (attach off))
+    (image PAD (pin p 1 0 0)))
+  (placement (component PAD
+    (place G1 3000 -5000 front 0) (place G2 3000 -15000 front 0)
+    (place G3 17000 -10000 front 0) (place S1 3000 -10000 front 0)
+    (place S2 17000 -3000 front 0)))
+  (network (net GND (pins G1-1 G2-1 G3-1)) (net SIG (pins S1-1 S2-1))))"""
+
+
+def _line(a, b, layer):
+    (x, y), (x1, y1) = a, b
+    out = [(x, y, layer)]
+    while x != x1:
+        x += 1 if x1 > x else -1
+        out.append((x, y, layer))
+    while y != y1:
+        y += 1 if y1 > y else -1
+        out.append((x, y, layer))
+    return out
+
+
+def test_a_shared_via_keeps_its_footprint_when_one_user_is_ripped():
+    dsn = parse_dsn(_SHARED_VIA)
+    s = dsn.resolution.value
+    router = GridRouter(
+        build_board(dsn),
+        trace_width=round(_rule_width_dsn(dsn) * s),
+        clearance=round(_rule_clearance_dsn(dsn) * s),
+        via_half=_via_half_board(dsn, s),
+    )
+    conns = router._conns = router._build_connections()
+    gnd = [c for c in conns if len({c.a.component_ref, c.b.component_ref} & {"G1", "G2", "G3"})]
+    sig = next(c for c in conns if c not in gnd)
+    first, second = gnd
+    g3 = router._cell_of(next(p for p in router.board.get_pins() if p.component_ref == "G3").location)
+    via = (g3[0] - 10, g3[1])
+
+    def through_via(conn):
+        a, b = router._cell_of(conn.a.location), router._cell_of(conn.b.location)
+        return _line(a, via, 0) + _line(via, b, 1)
+
+    router._commit(first, through_via(first))
+    router._commit(second, through_via(second))
+    footprint = [c for c in router._via_cells(via) if c != via]
+    router._rip(first)
+
+    assert second.routed and via in second.via_cells
+    assert all(router._via_claims.get(c) == [second.index] for c in footprint)
+    # another net still keeps its distance from the via that is left
+    assert all(router._enter_cost_base(c, 0, sig.net_no, False, conns) is None for c in footprint)
+
+
+def test_a_route_through_a_shared_via_rips_every_user():
+    """Two connections of a net share a via. Another net routed through it
+    in rip-up mode has to rip both, or the one left keeps its via under the
+    new trace and the exact check throws one of them out."""
+    dsn = parse_dsn(_SHARED_VIA)
+    s = dsn.resolution.value
+    router = GridRouter(
+        build_board(dsn),
+        trace_width=round(_rule_width_dsn(dsn) * s),
+        clearance=round(_rule_clearance_dsn(dsn) * s),
+        via_half=_via_half_board(dsn, s),
+    )
+    conns = router._conns = router._build_connections()
+    gnd = [c for c in conns if len({c.a.component_ref, c.b.component_ref} & {"G1", "G2", "G3"})]
+    sig = next(c for c in conns if c not in gnd)
+    first, second = gnd
+    g3 = router._cell_of(next(p for p in router.board.get_pins() if p.component_ref == "G3").location)
+    via = (g3[0] - 10, g3[1])
+
+    def through_via(conn):
+        a, b = router._cell_of(conn.a.location), router._cell_of(conn.b.location)
+        return _line(a, via, 0) + _line(via, b, 1)
+
+    router._commit(first, through_via(first))
+    router._commit(second, through_via(second))
+    # the via's copper alone: footprint cells no trace or trace halo covers
+    crossing = [
+        node
+        for c in router._via_cells(via)
+        for node in ((*c, 0), (*c, 1))
+        if node not in router._cell_owner and node not in router._halo
+    ]
+    assert crossing
+
+    assert router._crossed_owners(crossing, sig.net_no, conns) == {first.index, second.index}
+
+
+# --- a wider net class --------------------------------------------------------
+
+_WIDE = """(pcb wide (parser) (resolution um 10) (unit um)
+  (structure
+    (layer F.Cu (type signal))
+    (boundary (path pcb 0  0 0  20000 0  20000 -10000  0 -10000  0 0))
+    (rule (width 300) (clearance 250)))
+  (placement (component S (place P1 2000 -5000 front 0) (place P2 18000 -5000 front 0)
+     (place Q1 10000 {ylo} front 0) (place Q2 10000 {yhi} front 0)
+     (place Q3 10000 -1000 front 0) (place Q4 10000 -9000 front 0)))
+  (library (image S (pin pad 1 0 0)) (padstack pad (shape (rect F.Cu -600 -600 600 600)) (attach off)))
+  (network (net PWR (pins P1-1 P2-1)) (net SIG (pins Q1-1 Q3-1)) (net SIG2 (pins Q2-1 Q4-1))
+    (class Power PWR (rule (width 500) (clearance 250)))))"""
+
+
+@pytest.mark.parametrize("resolution", [1, 2])
+@pytest.mark.parametrize("gap", [900, 1000, 1075])
+def test_a_wide_net_past_pads_it_does_not_fit_between_is_not_refused(gap, resolution):
+    # 0.3 mm fits the gap between the two pads, 0.5 mm does not: the grid
+    # must see that, rather than lay it wide and have the exact check drop it
+    ylo, yhi = -5000 - gap // 2 - 600, -5000 + gap // 2 + 600
+    result = build_exact_routing_result(
+        parse_dsn(_WIDE.format(ylo=ylo, yhi=yhi)), resolution=resolution
+    )
+    assert result.unrouted == []
+
+
+def _wide_router():
+    dsn = parse_dsn(_WIDE.format(ylo=-6050, yhi=-3950))
+    s = dsn.resolution.value
+    pwr = next(i for i, net in enumerate(dsn.nets, 1) if net.name == "PWR")
+    return GridRouter(
+        build_board(dsn),
+        trace_width=round(_rule_width_dsn(dsn) * s),
+        clearance=round(_rule_clearance_dsn(dsn) * s),
+        resolution=2,
+        net_widths={pwr: 5000},
+    ), pwr
+
+
+def test_a_wide_trace_keeps_clear_of_a_default_one_at_the_grid_diagonal():
+    router, _pwr = _wide_router()
+    # 0.5 mm against 0.3 mm needs 0.25 + 0.25 + 0.15 = 0.65 mm between centres,
+    # on either axis, since the exact check compares boxes
+    need = 2500 + router.clearance + router.half_width
+    for dx, dy in [(2, 2), (2, 1), (1, 2)]:
+        assert max(dx, dy) * router.step < need
+        assert (dx, dy) in router._halo_for(2500)
+
+
+def test_a_wide_rip_up_route_counts_what_its_extra_width_crosses():
+    router, pwr_net = _wide_router()
+    conns = router._conns = router._build_connections()
+    pwr = next(c for c in conns if c.net_no == pwr_net)
+    other = next(c for c in conns if c.net_no != pwr_net)
+    # a default-width trace two cells from the wide route's path
+    x, y = 20, 5
+    router._commit(other, _line((x - 3, y + 2), (x + 3, y + 2), 0))
+    path = _line((x - 3, y), (x + 3, y), 0)
+    spread = router._spread_for(2500)
+    assert other.index not in router._crossed_owners(path, pwr.net_no, conns)
+    assert other.index in router._crossed_owners(path, pwr.net_no, conns, spread)
+
+
+def test_a_pad_cell_check_uses_the_rotated_outline():
+    board = build_board(parse_dsn(_socket_dsn(60, "y")))
+    router = GridRouter(board, trace_width=3000, clearance=2500, resolution=2)
+    oval = next(p for p in board.get_pins() if p.component_ref == "P3" and p.name == "2")
+    box = oval.shape.bounding_box()
+    margin = router.clearance + router.half_width
+    exact = set(router._pad_cells(oval.shape, box, margin))
+    boxed = set(router._cells_in_box(box, margin))
+    assert exact < boxed
+    for cell in boxed - exact:
+        c = router._cell_center(cell)
+        square = IntBox(c.x - margin, c.y - margin, c.x + margin, c.y + margin)
+        assert oval.shape.intersection(square).dimension() != 2
+
+
+def test_a_via_by_a_chamfered_corner_is_judged_round():
+    """The grid keeps a via's centre its radius plus the edge clearance from
+    the outline. The exact check used the via's square, whose corner reaches
+    past a 45-degree chamfer where the round via does not."""
+    from freeroute.board.outline import BoardOutline
+    from freeroute.geometry import IntBox, IntPoint
+    from freeroute.route.exact_router import _inside_outline
+
+    # a 10 mm square with its lower-left corner cut at 45 degrees
+    outline = BoardOutline([IntPoint(*p) for p in
+                            [(30, 0), (100, 0), (100, 100), (0, 100), (0, 30)]])
+    half, edge = 4, 1
+    via = IntPoint(19, 20)  # its centre 6.4 from the chamfer x + y = 30
+    square = IntBox(via.x - half, via.y - half, via.x + half, via.y + half)
+    assert not outline.box_clear(square, edge)  # the square's corner: 0.7 away
+    assert _inside_outline(outline, [], [via], half + edge, edge)
+    # 4.2 from the chamfer: the round via itself is too close
+    assert not _inside_outline(outline, [], [IntPoint(18, 18)], half + edge, edge)

tests/route/test_negotiate.py

@@ -0,0 +1,65 @@
+"""--negotiate: PathFinder-style rounds on the empty board before routing."""
+
+from __future__ import annotations
+
+from pathlib import Path
+
+import pytest
+
+from freeroute.board import build_board
+from freeroute.dsn import parse_dsn
+from freeroute.route.grid_router import GridRouter
+from freeroute.route.pipeline import _rule_clearance_dsn, _rule_width_dsn, route_dsn_board
+
+FIXTURES = Path(__file__).resolve().parent.parent / "dsn" / "fixtures"
+
+
+def _router(name, negotiate):
+    dsn = parse_dsn((FIXTURES / name).read_text())
+    s = dsn.resolution.value
+    return GridRouter(
+        build_board(dsn),
+        trace_width=round(_rule_width_dsn(dsn) * s),
+        clearance=round(_rule_clearance_dsn(dsn) * s),
+        negotiate=negotiate,
+    )
+
+
+def test_negotiation_leaves_the_board_empty_and_the_ends_as_they_were():
+    router = _router("true_density.dsn", 3)
+    conns = router._conns = router._build_connections()
+    ends = [(c.a_end, c.b_end) for c in conns]
+    router._negotiate(list(conns), conns)
+    assert router._history  # a dense board has contested cells
+    assert not router._cell_owner and not router._halo and not router._via_claims
+    assert not any(c.routed for c in conns)
+    assert [(c.a_end, c.b_end) for c in conns] == ends
+    assert router._present is None
+
+
+def test_sharing_is_priced_only_for_other_nets():
+    router = _router("true_density.dsn", 1)
+    node = (3, 4, 0)
+    router._history[node] = 2.0
+    router._present, router._present_cost = {node: {7: 1, 9: 2}}, 0.5
+    assert router._congestion(node, 7) == pytest.approx(2.5)  # one other net
+    assert router._congestion(node, 5) == pytest.approx(3.0)  # two other nets
+    router._present = None
+    assert router._congestion(node, 5) == pytest.approx(2.0)  # history only, after
+
+
+@pytest.mark.parametrize("name", ["ripup_needed.dsn", "true_density.dsn", "kicad_routable.dsn"])
+def test_negotiated_routing_keeps_the_occupancy_honest(name):
+    """Only routed connections hold cells afterwards, as without negotiation."""
+    router = _router(name, 3)
+    router.route()
+    conns = router._conns
+    assert all(conns[i].routed for i in router._cell_owner.values())
+    assert all(conns[i].routed for claims in router._halo.values() for i in claims)
+
+
+def test_option_reaches_the_router_and_is_off_by_default():
+    text = (FIXTURES / "kicad_routable.dsn").read_text()
+    plain, _, _ = route_dsn_board(parse_dsn(text))
+    again, _, _ = route_dsn_board(parse_dsn(text), negotiate=0)
+    assert plain.unrouted == again.unrouted

tests/route/test_real_board_geometry.py

@@ -51,19 +51,22 @@ def test_routes_keep_edge_clearance_at_a_rounded_corner():
                 assert outline.edge_distance(p) >= half + 500 * scale - 1
 
 
-@pytest.mark.parametrize(("resolution", "escape"), [(1, 2), (4, 5)])
-def test_every_pin_of_a_half_millimetre_pitch_row_escapes(resolution, escape):
+@pytest.mark.parametrize("resolution", [1, 4])
+def test_every_pin_of_a_half_millimetre_pitch_row_escapes(resolution):
     # Five 0.3 mm pads at 0.5 mm pitch, each wired to its own pad 8 mm away.
     # Between two neighbours a trace's centre has a legal band only 0.15 mm
-    # wide. At resolution 1 the 0.4 mm grid misses most bands; at 4 its
-    # 0.1 mm columns cannot, and every pin gets out, as the JAR manages.
+    # wide. At resolution 4 the 0.1 mm columns cannot miss it. At resolution
+    # 1 the 0.4 mm grid misses most bands, but a stub leaves its pin straight
+    # along the band and jogs to the column only past the pads, so every pin
+    # gets out there too, as the JAR manages (only 2 did before).
     places = " ".join(f"(place R{i} {6000 + 500 * i} -6000 front 0)" for i in range(5))
     places += " " + " ".join(f"(place F{i} {6000 + 500 * i} -14000 front 0)" for i in range(5))
     nets = " ".join(f"(net N{i} (pins R{i}-1 F{i}-1))" for i in range(5))
     result, _, _ = route_dsn_board_exact(
         parse_dsn(_dsn(f"(component P {places})", nets)), resolution=resolution
     )
-    assert len(result.routed_net_numbers) == escape
+    assert len(result.routed_net_numbers) == 5
+    assert result.drc_clean
 
 
 def test_resolution_one_has_no_halo_so_the_grid_is_unchanged():

tests/route/test_rollback.py

@@ -31,7 +31,7 @@ def test_occupancy_only_holds_routed_connections(name):
     router, _ = _routed_router(name)
     conns = router._conns
     assert all(conns[i].routed for i in router._cell_owner.values())
-    assert all(conns[i].routed for i in router._via_owner.values())
+    assert all(conns[i].routed for claims in router._via_claims.values() for i in claims)
     assert all(conns[i].routed for claims in router._halo.values() for i in claims)
 
 

tests/route/test_straight_pin_exits.py

@@ -0,0 +1,58 @@
+"""Pins of a 1.27 mm pitch row routed at 1.0 mm (the RN2483 module on the
+TTN Enschede mote). A trace centre has to stay within 0.06 mm of a pin's
+centreline to pass its neighbours, which no grid column hits, so a route
+leaves each pin straight along that line and only jogs to its column once
+past the pads. FreeRouting routes this row in full the same way."""
+
+from __future__ import annotations
+
+import pytest
+
+from freeroute.board import build_board
+from freeroute.board.items import Pin
+from freeroute.dsn import parse_dsn
+from freeroute.geometry import IntPoint
+from freeroute.route.grid_router import GridRouter
+from freeroute.route.pipeline import route_dsn_board_exact
+
+
+def _row(x0: int, pins: int = 6, skew: int = 3000) -> str:
+    places = " ".join(f"(place R{i} {x0 + 1270 * i} -5000 front 0)" for i in range(pins))
+    places += " " + " ".join(
+        f"(place T{i} {x0 + 1270 * i + skew} -15000 front 0)" for i in range(pins)
+    )
+    nets = " ".join(f"(net N{i} (pins R{i}-1 T{i}-1))" for i in range(pins))
+    return f"""(pcb t (parser) (resolution um 10) (unit um)
+  (structure (layer F.Cu (type signal)) (layer B.Cu (type signal))
+    (boundary (path pcb 0 0 0 30000 0 30000 -20000 0 -20000 0 0))
+    (via "Via[0-1]_600:400_um") (rule (width 1000) (clearance 200)))
+  (placement (component P {places}))
+  (library (image P (pin pad 1 0 0))
+    (padstack pad (shape (rect F.Cu -508 -762 508 762)) (attach off))
+    (padstack "Via[0-1]_600:400_um" (shape (circle F.Cu 600)) (shape (circle B.Cu 600))
+      (attach off)))
+  (network {nets}))"""
+
+
+@pytest.mark.parametrize("x0", [5000, 5150, 5300])
+def test_every_pin_of_a_row_leaves_straight_and_routes(x0):
+    # three offsets of the row against the grid; before, 2 or 3 of 6 routed
+    result, _, _ = route_dsn_board_exact(parse_dsn(_row(x0)), resolution=2)
+    assert len(result.routed_net_numbers) == 6
+    assert result.drc_clean
+
+
+def test_a_walled_in_pin_may_escape_to_the_column_either_side():
+    # two pins side by side leaving the same way can then jog apart
+    board = build_board(parse_dsn(_row(5000)))
+    router = GridRouter(board, trace_width=10000, clearance=2000, orthogonal=True, resolution=2)
+    router._conns = router._build_connections()
+    pin = next(
+        p for p in board.get_items()
+        if isinstance(p, Pin) and p.location == IntPoint(50000 + 2 * 12700, -50000)
+    )
+    net = pin.net_nos[0]
+    cx, cy = router._cell_of(pin.location)
+    nodes = router._escape_nodes(pin, net, router._conns, [0], (cx, cy))
+    columns = {x for x, y, _ in nodes if y != cy}
+    assert {cx - 1, cx, cx + 1} <= columns

tests/route/test_tree_nets.py

@@ -0,0 +1,170 @@
+"""Multi-pin nets: spanning-tree pairs, and connections that end on copper
+their net has already routed (a T into the tree)."""
+
+from __future__ import annotations
+
+import pytest
+
+from freeroute.board import build_board
+from freeroute.dsn import parse_dsn
+from freeroute.route import exact_router
+from freeroute.route.grid_router import GridRouter, RouteResult
+from freeroute.route.pipeline import _rule_clearance_dsn, _rule_width_dsn
+
+# P1 and P2 are nearest each other, so the tree pairs them first; P3 sits
+# under the middle of that leg, 50 mm below it and 90 mm from either pin.
+TEE = """(pcb "tee.dsn"
+  (parser (string_quote ") (space_in_quoted_tokens on) (host_cad "t") (host_version "1"))
+  (resolution um 10)
+  (unit um)
+  (structure
+    (layer F.Cu (type signal) (property (index 0)))
+    (boundary (path pcb 0  0 0  200000 0  200000 -100000  0 -100000  0 0))
+    (rule (width 2000) (clearance 2000))
+  )
+  (library
+    (padstack Rect_Pad (shape (rect F.Cu -1000 -1000 1000 1000)) (attach off))
+    (image PAD (pin Rect_Pad 1 0 0))
+  )
+  (placement
+    (component PAD
+      (place P1 60000 -20000 front 0)
+      (place P2 140000 -20000 front 0)
+      (place P3 100000 -70000 front 0)
+    )
+  )
+  (network
+    (net N (pins P1-1 P2-1 P3-1))
+    (class default (rule (width 2000) (clearance 2000)))
+  )
+  (wiring)
+)
+"""
+
+
+def _router(tree_nets=True, text=TEE):
+    dsn = parse_dsn(text)
+    s = dsn.resolution.value
+    return GridRouter(
+        build_board(dsn),
+        trace_width=round(_rule_width_dsn(dsn) * s),
+        clearance=round(_rule_clearance_dsn(dsn) * s),
+        orthogonal=True,
+        tree_nets=tree_nets,
+    )
+
+
+def test_pairs_follow_a_spanning_tree_not_the_pin_order():
+    router = _router()
+    conns = router._build_connections()
+    pairs = [(c.a.component_ref, c.b.component_ref) for c in conns]
+    assert pairs == [("P1", "P2"), ("P1", "P3")]
+    chain = _router(tree_nets=False)._build_connections()
+    assert [(c.a.component_ref, c.b.component_ref) for c in chain] == [("P1", "P2"), ("P2", "P3")]
+
+
+def test_the_third_pin_tees_into_the_first_leg():
+    router = _router()
+    result = router.route()
+    first, second = router._conns
+    assert result.unrouted == 0
+    # the second connection starts on the first one's copper, mid-leg
+    start = second.path[0]
+    assert start in first.copper and second.a_end is None
+    assert second.anchors == {first.index}
+    assert router._dependents[first.index] == {second.index}
+    assert abs(router._cell_center(start[:2]).x - 1_000_000) <= router.step
+    # and so its copper is the 50 mm drop, not 90 mm back to a pin
+    assert len(second.path) < len(router._conns[0].path)
+
+
+def test_without_trees_each_connection_ends_on_a_pin():
+    router = _router(tree_nets=False)
+    router.route()
+    assert all(c.anchors == frozenset() for c in router._conns)
+    assert all(c.a_end is not None and c.b_end is not None for c in router._conns)
+
+
+def test_ripping_an_anchor_takes_what_hangs_on_it():
+    router = _router()
+    router.route()
+    first, second = router._conns
+    victims = router._with_dependents([first], router._conns)
+    assert victims == [first, second]  # anchors first, as committed
+    for victim in victims:
+        router._rip(victim)
+    assert not first.routed and not second.routed
+    assert not router._dependents.get(first.index)
+    assert not router._cell_owner
+
+
+def test_the_snapshot_lists_anchors_before_what_hangs_on_them():
+    router = _router()
+    result = router.route()
+    assert result.connection_anchors == [(), (0,)]
+
+
+def test_the_exact_engine_drops_a_tee_whose_anchor_it_rejects(monkeypatch):
+    """A connection teed onto copper the exact check refuses would dangle."""
+    dsn = parse_dsn(TEE)
+    board = build_board(dsn)
+    real = exact_router.route_board
+
+    def grid_then_spoil(*args, **kwargs):
+        result: RouteResult = real(*args, **kwargs)
+        assert result.connection_anchors == [(), (0,)]
+        # move the first leg off the board edge so the exact check rejects it
+        net, wires, vias = result.connections[0]
+        result.connections[0] = (net, [(layer, [type(p)(p.x, p.y + 2_000_000) for p in pts])
+                                       for layer, pts in wires], vias)
+        return result
+
+    monkeypatch.setattr(exact_router, "route_board", grid_then_spoil)
+    s = dsn.resolution.value
+    exact = exact_router.route_board_exact(
+        board,
+        trace_width=round(_rule_width_dsn(dsn) * s),
+        clearance=round(_rule_clearance_dsn(dsn) * s),
+    )
+    assert len(exact.result.failed) == 2  # the leg and the T hanging on it
+    assert not exact.result.wires
+
+
+@pytest.mark.parametrize("tree_nets", [True, False])
+def test_occupancy_stays_honest(tree_nets):
+    router = _router(tree_nets)
+    router.route()
+    conns = router._conns
+    assert all(conns[i].routed for i in router._cell_owner.values())
+    for anchor, hanging in router._dependents.items():
+        for i in hanging:
+            assert conns[i].routed and conns[anchor].routed
+
+
+# P1-P2 along the top, P3 far off to the lower right, P4 just under the
+# middle of the P1-P2 leg.
+CHAIN_TEE = TEE.replace(
+    """      (place P3 100000 -70000 front 0)
+""",
+    """      (place P3 190000 -90000 front 0)
+      (place P4 100000 -40000 front 0)
+""",
+).replace("(pins P1-1 P2-1 P3-1)", "(pins P1-1 P2-1 P3-1 P4-1)")
+
+
+def test_a_tee_depends_on_every_connection_back_to_its_group():
+    """Joined as P1-P2, P2-P3, P3-P4, P4's connection tees onto P1-P2 copper,
+    which reaches P3's group only through P2-P3. Ripping P2-P3 must take the T
+    too, or it would be counted routed while cut off from P3."""
+    router = _router(text=CHAIN_TEE)
+    conns = router._conns = router._build_connections()
+    groups = {c.a.component_ref: c.a_group for c in conns}
+    groups.update({c.b.component_ref: c.b_group for c in conns})
+    for conn, (a, b) in zip(conns, (("P1", "P2"), ("P2", "P3"), ("P3", "P4")), strict=True):
+        conn.a_group, conn.b_group = groups[a], groups[b]
+    for conn in conns:
+        assert router._try_route(conn, conns)
+    first, second, third = conns
+    assert third.path[0] in first.copper  # the T lands on the far leg
+    assert third.anchors == {first.index, second.index}
+    assert router._with_dependents([second], conns) == [second, third]

tests/route/test_window_reroute.py

@@ -0,0 +1,128 @@
+"""Window re-route: a finer grid around a stuck connection, kept only when
+it leaves fewer connections unrouted."""
+
+from __future__ import annotations
+
+from freeroute.board import build_board
+from freeroute.dsn import parse_dsn
+from freeroute.geometry import IntBox
+from freeroute.route.grid_router import GridRouter
+from freeroute.route.pipeline import _rule_clearance_dsn, _rule_width_dsn, route_dsn_board_exact
+
+
+def _slot(gap: int = 640, far: bool = False) -> str:
+    """A wall across the board with a slot in it. A trace fits the slot
+    only along a narrow band of heights that the board's 1x grid has no row
+    in and a 4x grid does. ``far`` adds a second net nowhere near the wall."""
+    yc = -5000
+    lo, hi = yc - gap // 2, yc + gap // 2
+    extra_place = "(place Q1 2000 -1000 front 0) (place Q2 6000 -1000 front 0)" if far else ""
+    extra_net = "(net M (pins Q1-1 Q2-1))" if far else ""
+    return f"""(pcb "slot.dsn"
+  (parser (string_quote ") (space_in_quoted_tokens on) (host_cad "t") (host_version "1"))
+  (resolution um 10)
+  (unit um)
+  (structure
+    (layer F.Cu (type signal) (property (index 0)))
+    (boundary (path pcb 0  0 0  20000 0  20000 -10000  0 -10000  0 0))
+    (keepout "" (rect F.Cu 9000 -10000 11000 {lo}))
+    (keepout "" (rect F.Cu 9000 {hi} 11000 0))
+    (rule (width 200) (clearance 200))
+  )
+  (library
+    (padstack Rect_Pad (shape (rect F.Cu -100 -100 100 100)) (attach off))
+    (image PAD (pin Rect_Pad 1 0 0))
+  )
+  (placement
+    (component PAD
+      (place P1 3000 {yc} front 0)
+      (place P2 17000 {yc} front 0)
+      {extra_place}
+    )
+  )
+  (network
+    (net N (pins P1-1 P2-1))
+    {extra_net}
+    (class default (rule (width 200) (clearance 200)))
+  )
+  (wiring)
+)
+"""
+
+
+def _route(text: str, rounds: int, **window):
+    exact, _scale, _layers = route_dsn_board_exact(
+        parse_dsn(text), resolution=1, window_reroute=rounds, window_resolution=4, **window,
+    )
+    return exact.result
+
+
+def test_the_board_grid_misses_the_slot_and_a_finer_window_finds_it():
+    plain = _route(_slot(), 0)
+    assert len(plain.failed) == 1
+    windowed = _route(_slot(), 1)
+    assert windowed.failed == []
+    assert windowed.wires  # and the copper it found is in the result
+
+
+def test_a_window_that_cannot_help_leaves_the_board_as_it_was():
+    plain = _route(_slot(gap=500, far=True), 0)  # too narrow for any grid
+    windowed = _route(_slot(gap=500, far=True), 2)
+    assert len(windowed.failed) == len(plain.failed) == 1
+    assert windowed.wires == plain.wires
+    assert windowed.vias == plain.vias
+
+
+def test_copper_outside_the_window_is_kept_as_it_was():
+    plain = _route(_slot(far=True), 0)
+    windowed = _route(_slot(far=True), 1)
+    assert windowed.failed == []
+    far_net = 2  # M, the second net in the DSN
+    assert windowed.wires[far_net] == plain.wires[far_net]
+
+
+def test_a_router_limited_to_some_nets_and_a_box_builds_only_those():
+    dsn = parse_dsn(_slot(far=True))
+    s = dsn.resolution.value
+    board = build_board(dsn)
+    whole = GridRouter(board, trace_width=round(_rule_width_dsn(dsn) * s),
+                       clearance=round(_rule_clearance_dsn(dsn) * s), orthogonal=True)
+    part = GridRouter(board, trace_width=round(_rule_width_dsn(dsn) * s),
+                      clearance=round(_rule_clearance_dsn(dsn) * s), orthogonal=True,
+                      only_nets=frozenset({2}), bounds=IntBox(0, -20000, 80000, 0))
+    assert {c.net_no for c in whole._build_connections()} == {1, 2}
+    assert {c.net_no for c in part._build_connections()} == {2}
+    assert part.cols * part.rows < whole.cols * whole.rows
+
+
+def test_a_spent_budget_starts_no_window():
+    assert len(_route(_slot(), 1, window_budget=0.0).failed) == 1
+    assert _route(_slot(), 1, window_budget=1000.0).failed == []
+
+
+def test_window_board_keeps_far_items_of_the_rerouted_nets_only():
+    from freeroute.route.window import _item_box, _window_board
+
+    board = build_board(parse_dsn(_slot(far=True)))
+    items = [(item, _item_box(item)) for item in board.get_items()]
+    view = IntBox(80000, -60000, 120000, -40000)  # around the slot, far from Q1/Q2
+    sub = _window_board(board, items, view, {1}, {}, set(), {}, 100, 300, 300, [0], "via")
+    refs = {p.component_ref for p in sub.get_pins()}
+    assert {"P1", "P2"} <= refs  # net N's pins, though outside the view
+    assert not refs & {"Q1", "Q2"}  # net M's, far away, left out
+
+
+def test_a_connection_ending_outside_the_window_gets_no_copper():
+    """Its far end has no grid cells; a stub out to it would cross items the
+    window board never saw."""
+    from freeroute.route.exact_router import route_board_exact
+
+    dsn = parse_dsn(_slot(far=True))
+    s = dsn.resolution.value
+    window = IntBox(70000, -70000, 130000, -30000)  # the slot only; net M's pins are far off
+    result = route_board_exact(
+        build_board(dsn), trace_width=round(_rule_width_dsn(dsn) * s),
+        clearance=round(_rule_clearance_dsn(dsn) * s), only_nets=frozenset({2}), bounds=window,
+    ).result
+    assert [f[0] for f in result.failed] == [2]
+    assert not result.wires.get(2) and not result.vias.get(2)

tests/test_cli.py

@@ -158,7 +158,10 @@ def test_cli_supported_combinations_are_accepted(tmp_path):
         "orders": ["--orders", "2"],
         "promote": ["--promote-failures", "2"],
         "access": ["--access-cost", "5"],
+        "negotiate": ["--negotiate", "2"],
         "rollback": ["--no-rollback"],
+        "tree": ["--no-tree"],
+        "window": ["--window-reroute", "1"],
     }
     for engine, options in ENGINE_OPTIONS.items():
         for option in options: